Water Quality

Compare Tool

Select up to 3 products

1 - 32 of 113
Sort
View
Show
  • 3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

  • Applications: Food and Beverage, Environmental Education, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…

  • All the benefits of DPD tablets in a liquid Can be used with existing LaMotte chlorine comparators or colorimeters Lower cost per test than tablets Quicker results and clearer colors than tablets DPD 1A and 1B reagents are added to a 5 or 10 mL sample to test free chlorine.…

  • Octet Comparator Method For determining aluminum in water Sufficient for 50 tests Octet Comparator has color standards representing 0, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 and 0.5 ppm. A pink to red color will form when aluminum reacts with Eriochrome Cyanine R, at pH 6.

  • 3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…

  • Zinc Test Kits

    LaMotte

    Octet Comparator For determining zinc in cooling waters Octet Comparator has color standards representing 0, 1, 2, 3, 4, 6, 8 and 10 ppm zinc Employs buffered zincon reagent system Sufficient for 50 tests

  • Octet Comparator Method For determining hexavalent, trivalent, and total chromium Octet comparator has color standards representing 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2 and 1.5 ppm Cr Sufficient for 20 tests Test requires suitable hot plate, not included Reagent Refill only. …

  • Replacement LaMotte ColorQ Alkalinity Indicator reagent. This replacement reagent has a bottle size of 2 oz. This Reagent is for use with the Lamotte ColorQ Pro 7 Plus Test Kits.

  • Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

  • This kit tests for Total Hardness by using the Direct Reading Titrator Method. All results are as CaCO3. Range/sensitivity is 0-200 ppm/4ppm CaCO3. Applications: Industrial Water Boiling and Cooling, Water and Wastewater # Tests (# Rgts): 50 at 200 ppm (3)

  • This kit tests for Phosphate using the Octa-Slide 2 Comparator. Range is 1.0 - 10.0 ppm (PO4) and 10 - 100 ppm (PO4). Applications: Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater  

  • The ColorQ Biguanide Pool/Spa 5 handheld photometer measures five pool and spa test directly on a digital display. The meter will measure the following: Biguanide, pH, Alkalinity, Calcium Hardness, and Biguanide Shock. Included in the kit are enough liquid reagents to measure 144 tests for…

  • The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.

  • This kit tests for Calcium and magnesium hardness by using the Dropper Bottle method. All results are as CaCO3. Range/sensitivity is 1 drop = 10 ppm or 1 gpg CaCO3. Applications: Industrial Water Boiling and Cooling, Water and Wastewater # Tests (# Rgts): 50 at 200…

  • Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl2 in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

  • The Insta-Test Total Chlorine/pH/Hardness and Iron test kit combines the best of both worlds. The kit includes 25 quick, easy and accurate tests using a simple dip-and-read formulation. The strips are packaged in a unique hinged, waterproof PopTop bottle with a desiccant liner that protects the…

  • 4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm

  • Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater 2951HR High Range QAC test papers are specifically formulated to read high range levels of QAC. Range and sensitivity is 200, 400, 600, 1000, 1500 ppm.

  • This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education

  • Direct Reading Titrator Method (9859A70 and A71) For determining total (T) alkalinity in water Range of 0 to 200 ppm as CaCO3 in 4 ppm increments Employs APHA Method 403. Sufficient for 50 tests at 200 ppm. Direct Reading Titrator (9859B10) For determining phenolphthalein (P)…

  • 3114 Mid-Range Octet Comparator For determining orthophosphates in water Employs ascorbic acid reduction method Octet Comparator has color standards representing 0.5, 1, 2, 3, 4, 6, 8 and 10 ppm phosphate Sufficient for 50 tests

  • Iron Test Kits

    LaMotte

    Octet Comparator For determining total iron (dissolved, suspended and collodial) in natural waters Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace…

  • Applications: Drinking Water, Industrial Water Boiling and Cooling, Water and Wastewater This Alkalinity Test Kits uses a Direct Reading Titrator with standard acid to the phenolphthalein (P) and/or total (T) alkalinity endpoint. Range and sensitivity is 0–200 ppm as CaCO3 in 4 ppm…

  • Most Widely used DPD Chlorine Tablets for Determining Free and Combined Chlorine DPD chlorine tablets employ DPD indicator (diethyl-p- phenylenediamine) to distinguish levels of free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument…

  • This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

  • Silica Test Kit

    LaMotte

    Octet Comparator For determining silica in natural and industrial waters Employs modified APHA Method 425D Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10.0 ppm silica Sufficient for 50 tests

  • The ColorQ Pool 4 measures four basic pool and spa tests, Free Chlorine (0 to 10 ppm); Total Chlorine (0 to 10 ppm); Bromine (0 to 22 ppm) and pH (6.5 to 8.5 pH). As a bonus, the ColorQ Pool 4 can also measure Total Alkalinity (Code 7038-G), Calcium Hardness (Code 7041-G and 7042-G), and Cyanuric…

  • This kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO2

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.