Water Quality

Compare Tool

Select up to 3 products

HomeAll Products

Water Quality

1 - 32 of 522
Sort
View
Show
  • Strips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm

  • 3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

  • Single Roll Hydrion Quat Check Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, specifically Alkyldimethylbenzyl ammonium compounds, Rocall II, and Hyamine 3500. The Color matches within the Hi Range cocentration at…

  • The most widely used disinfectant for drinking water, chlorine is also important for sanitizing swimming pools, cooling towers, other industrial equipment, and in the treatment of municipal wastewater. Its measurement and control are vital for both safety and economic reasons. Chlorine exists in…

  • Control of chlorine and pH in pools and spas to maintain safe bathing conditions and to protect against system corrosion. Supplied with color discs and comparator for monitoring chlorine and pH, the Free & Total Chlorine and pH Test Kit provides more accuracy than test kits using color cubes. …

  • DPD Powder Pop® Dispenser with tests for Chlorine Compact and convenient Redesigned dispenser prevents clogging Dispense into round or square cuvettes Push button operation for precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for…

  • Sodium Test Kit

    LaMotte

    Direct Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and…

  • Test tap water from any source and study the impact of urban water on the city’s environment. "Wet in the City," a hands-on kit, introduces the basic concepts of water chemistry–even to kids as young as third grade! Non-hazardous TesTabs® make "Wet in the City" an…

  • Octet Comparator For determining trace levels of free cyanide in water Octet comparator has color standards representing 0.00, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35 and 0.40 ppm Free CN - Sufficient for 50 tests  

  • For measuring water turbidity (cloudiness) according to either EPA or ISO Standards Easy Calibration and Operation Auto Ranging from 0-1100 NTU Simple 5 key operation Signal Averaging for stable and accurate readings Long Battery and Bulb Life Portable for use either in the…

  • Glycol CHEMets Kit

    CHEMetrics

    Ethylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…

  • Detect free or total chlorine concentrations as low as 0.05ppm Test strips for field testing and quality-control procedures; provide a safe and economical alternative to reagent chlorine testing. Includes: 50 test strips are supplied in bottle labeled with instructions,…

  • Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Applications: Industrial Water Boiling and Cooling, Water and Wastewater This kit tests for Total Hardness using the Dropper Bottle Method. All results are as CaCO3. Range/sensitivity is 1 drop = 2, 5, or 10 ppm CaCO3.

  • Resulting from the anaerobic decomposition of organic matter, hydrogen sulfide is present in many water supplies. Sewage and industrial wastes are other sources of sulfide pollution. Highly toxic, this compound has a characteristic rotten egg odor, which can be detected long before harmful…

  • Proper maintenance and optimization of boilers and cooling towers require a careful balance between water quality parameters and treatment chemicals. This kit provides testing capability for sulfite, phosphate (0-40 mg/L), and pH (7.4-9.6), offering an economical means of monitoring common…

  • Applications: Laundry and Sanitation This kit tests for caustic levels by adding drops of Barium Chloride solution to a sample where white precipitate will form if carbonates are present. Levels are then determined using the Phenolphthalein Indicator. Range and sensitivity is 1 drop = 0.1 or…

  • For determination of Total Nitrogen by the Persulfate Digestion Test 'N Tube method:  Hach Method 10072. Range: 10 - 150 mg/L N. 25-50 tests (dependent upon the number of reagent blank tests performed) Test 'N Tube products provide safe, convenient testing Easy…

  • Phosphorus TNTplus® chemistry and your Hach spectrophotometer are engineered to simplify water analysis for accurate results, everytime. For determination of Reactive (ortho) Phosphorus (phosphate) by the Molybdovanadate method. Easy and safe handling No reagent blank necessary …

  • This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

  • Modern Water is expert in the design, development and provision of analytical instruments and technologies for monitoring toxicity in water, soil, food and industry. Our systems use bioluminescent bacteria to perform biosensor testing that detects the presence of toxic substances. The new…

  • Selectivity: Total Coliform Bacteria and Escherichia coli 1 Year shelf life at room temperature

  • Formaldehyde, a toxic substance, is used in the following applications: metal plating baths, textile treatments, biological specimen preservatives, and disinfectants of medical equipment. Commercial formaldehyde gas is readily soluble in water. The Purpald Method Reference:…

  • Method: colorimetric with test strips and reagent 10 - 20 - 40 - 60 - 100 mg/l HCHO MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +2°C to +8°C. Hazard: Corrosive Formaldehyde is used as a…

  • Direct Reading Titrator For determining free carbon dioxide in water Range of 0 to 55 ppm CO2 in 1 ppm increments Employs APHA Method 406B with sodium hydroxide titrant. Sufficient for 50 tests at 50 ppm.

  • Precautionary Statement(s): P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P240: Ground/bond container and receiving equipment. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.…

  • For determination of Reactive (ortho) and Total Phosphorus (phosphate) by the Ascorbic Acid method, using TNTplus vials. Hach Methods 10209 (reactive) and 10210 (total). High Range: 0.5-5.0 mg/L PO4-P (1.5-15.0 mg/L PO4). 25 tests/package Reduce Errors with Bar-coded Vials No Reagent…

  • The cyanide test is suitable for monitoring cyanide ions in the effluent from electroplating works. Only readily dissociable cyanides are detected.

  • Yes/No qualitative test Sensitivity less than 2.2 per 100 mL of sample No incubation equipment required; only room temperature

  • When customers complain of returning laundry that is stained and dingy, the IR-20 kit lets you do quick, on-the-spot tests for iron and manganese to see where the problem lies. Simple, fast, color disc method Kit includes three reagents, bottles, test tube brush, color discs, comparator…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.