The CHEMetrics chlorine comparator is ideal for drinking water applications, by detecting the percentage of chlorine present in water. It is easy to use and ensures accurate testing.

Nitrogen, Nitrate/Nitrite: Excessive amounts of nitrate or nitrite in water can cause infant death, adult illness, and produce spontaneous abortion in cows. Some wells contain high levels of nitrate. When water contains high nitrate levels, nitrites often are present in low concentration. …

UN Number: UN3316

QUANTOFIX Peracetic acid 50 semi-quantitative test strips for the determination of peracetic acid. Measuring range: 0-5-10-20-30-50 mg/L

Precautionary Statement(s): P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P240: Ground/bond container and receiving equipment. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.…

QUANTOFIX Total acid semi-quantitative test strips for the determination of total acid content as expressed as g of citric acid. Measuring range: 2-2.5-3.0-3.5-4.0-5.0 g/L Citric acid

4790 OctaSlide Comparator For determining Diethylhydroxylamine (DEHA) concentrations by way of iron reduction method Octa-Slide comparator provides 8 standards between 0.05-1.5 ppm Three reagents perform 100 tests

The DG Water Tests are accurate and sensitive water test kits for the detection and quantification of toxic chemicals in water. The kits are easy-to-use and cost effective. The DG Water Test Kits include: Sample Vials Developing Solution Color comparator Disposable Pipettes …

All necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system

QUANTOFIX Chloride semi-quantitative test strips for the determination of chloride (Cl - ) in solutions. *MUST SHIP COLD* Measuring range: 0-500-1000-1500-2000 ->3000 mg/L Cl-

This kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…

Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…

Method: colorimetric with test strips 0.5 - 1 - 2 - 3 mg/g KOH MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. Deep-frying causes oils and fats to decompose over time. One of the major by-products of decomposition is free…

Drop Count Method For determining sulfite in water Employs modified APHA Method 428 One drop equals 5 ppm SO₃ Sufficient for 50 tests at 100 ppm

QUANTOFIX Total iron 100 semi-quantitative test strips for the rapid and easy analysis of Iron directly on-site. Measuring range: 0-2-5-10-25-50-100 mg/L Fe2+/Fe3+

The test can be used for determination of sucrose in beverages, e. g. fruit/vegetable juice and refreshment drinks after appropriate sample pretreatment or dilution. Method: reflectometric with test strips and reagent 0.25 - 2.50 g/l

Tests for the EPA limit of 15 ppb (μg/L) Lead in water The Lead Water Test for water quality testing is a revolutionary product designed to make testing for Lead safe, easy, and affordable. This patent pending device utilizes a lateral flow test strip, similar in technology to home…

Low Cost, Easy to use kits for testing a wide range of water quality Parameters Continuous gradient color disks provide accurate measurements—no need to “extrapolate” between discrete color blocks Rotate the color wheel to obtain a color match with the reacted sample and read your result…

AQUADUR test sticks for the quick and easy determination of water hardness. Gradation: 3 >5 >10 >15 >20 >25 °d = 54 >90 >180 >270 >360 >450 ppm CaCO3

EPA-accepted method for NPDWR and NPDES Employs modified APHA Argentometric method Range of 0 to 50 ppm Cl in 1 ppm increments Sufficient for 50 tests Range of 0 to 200 ppm Cl in 4 ppm increments Sufficient for 50 tests at 200 ppm Employs Argentometric method

Hydrogen peroxide is a strong oxidizing agent with a variety of uses. Applications include the treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging. The Ferric Thiocyanate Method Reference: D. F. Boltz and J. A. Howell, eds.,…

UN Number: UN3316

UN Number: UN3316

QUANTOFIX Multi stick for aquarium owners are the semi-quantitative test strips for the determination of the total hardness (Ca 2+ , Mg 2+ ), carbonate hardness (HCO 3 -, CO 3 2-) and the pH value of aquarium water. Measuring range: 0-6.3-12.5-18.8-25.0-31.3 °e (total hardness)…

The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.

No color matching, no look up charts, no guessing! The unique, multi-test ColorQ pool and spa hand-held photometer reads SEVEN test factors (Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric Acid) directly on a digital display. Featuring an innovative…

UN Number: UN3316

For determining potassium in natural waters and brine Turbidity tube is calibrated for 6, 8, 10, 20, 30, 40 and 50 ppm potassium Sufficient for 100 tests For replacement reagent, order 0534B49

This Nitrate Nitrogen Test Kit tests for nitrate nitrogen levels using cadmium reduction which undergoes diazotization/coupling to form a pink color. Levels are determined using the Octa-Slide 2 comparator Range and sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…

UN Number: UN3316