Strips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm

For detection and semi-quantitative determination of cations and anions in solution Furnished in aluminum vials with plastic snap cap Desiccant pack is provided inside cap Each strip contains reagents, buffers and masking chemicals necessary to perform the test. All but sulfate…

Sensitive, safe to use - SenSafe No reagent preparation time Easy to do, quick results These test strips are an excellent alternative to wet chemical chlorine tests. The unique indicator (TMB) is reactive only to free chlorine; therefore, no interference from monochloramines occurs.…

Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trivalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. …

In domestic water supplies, iron can do great economic damage by staining laundry and porcelain fixtures and by producing an off taste in beverages. In water supplies used for commercial beverage production, low levels of iron are critical. Hach's test strips provide the most easily-used method for…

About Nitrogen, Ammonia A product of microbiological decay of plant and animal protein. Its presence in raw surface waters usually indicates domestic or agricultural pollution. Above certain levels, it is toxic to fish. Fast, reliable, and safe test strips from Hach: Hach Test Strips are easy…

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

5-in-1 test strips are great  for quick, on-site evaluations of water quality with reliable results on every test.  These mulit-parameter test strips test for five water quality measurements on 1 strip: Free Chlorine (0-10 mg/L) Total Chlorine (0-10 mg/L) Total Hardness (as…

QUANTOFIX Chloride semi-quantitative test strips for the determination of chloride (Cl - ) in solutions. *MUST SHIP COLD* Measuring range: 0-500-1000-1500-2000 ->3000 mg/L Cl-

Dip and read No mixing sample and reagent Economical, quick results Patented tests are quick alternatives for food or environmental testing. Supplied in bottles of 50 loose strips or packages of individually wrapped strips Tests for lead and other heavy metals

Method: colorimetric with test strips 200 - 400 - 800 - 1200 - 1600 mg/l SO₄ 2- MQuant™ Storage class: 10 - 13 Other liquids and solids Storage Store: at +15°C to +25°C. The sulfate test can be used to give a rapid estimation of the sulphate ion content…

Hach test strips are manufactured with a unique reagent pad at the tip, using proven chemistries based on standard reference methods. Just dip the strip, wait until color development occurs, and compare the color of the reacted pad to the chart printed on the bottle. Hach products are…

QUANTOFIX Nitrate/Nitrite semi-quantitative test strips for the rapid and reliable determination of Nitrate and Nitrite in solutions. Measuring range: 0-10-25-50-100-250-500 mg/L NO3- 0-1-5-10-20-40-80 mg/L NO2-

Double Roll Hydrion Quat Check Test Paper provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, specifically Alkyldimethylbenzyl ammonium compounds, Rocall II, and Hyamine 3500. With color matches within the Hi Range of 0-200-400-600-800-1000ppm…

The New Dual Range QAC Test Strip takes care of ALL of your testing needs on ONE STRIP! Whether checking the concentration of your QAC solution or checking to ensure complete removal from treated surfaces, the new Dual Range QAC Test Strip DOES IT ALL! Chemically-treated test strips change…

The Micro Check Test Strips are an accurate, inexpensive and safe alternative for reagent chlorine testing. Quick, accurate and easy to use results are achieved in under 1 minute.  Free Chlorine with sensitivity as low as 0.05ppm (mg/L). Micro Check free, detection levels ppm (0, 0.1,…

QUANTOFIX Sulphate semi-quantitative test strips for the determination of sulphate in solutions. Measuring range: 200->400->800->1200- >1600 mg/L SO42-

Room temperature incubation Easy to do Results in 48 hours Bacteria Check (3108U83) is a presumptive Presence-Absence test for Coliform bacteria based on Lactose Fermentation as described in Standard Methods and by the USEPA. Color change from purple to yellow afer 48 hour room…

This test paper allows the quick and easy detection of hydrocyanic acid and cyanides in aqueous solutions and extracts. They are for example formed in the manufacture of fruit brandies and are toxic even in low concentrations. To detect cyanides in solution, a drop of concentrated sulfuric acid is…

Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

QUANTOFIX EDTA semi-quantitative test strips for the rapid and easy analysis of EDTA directly on-site. Measuring range: 0-100-200-300-400 mg/L

QUANTOFIX Total acid semi-quantitative test strips for the determination of total acid content as expressed as g of citric acid. Measuring range: 2-2.5-3.0-3.5-4.0-5.0 g/L Citric acid

Method: colorimetric with test strips 10 - 40 - 80 - 180 - 400 mg/l SO₃ 2- MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +2°C to +8°C. The sulfite test is suitable for food analysis, particularly in the testing of wine and…

The Insta-Test Total Chlorine/pH/Hardness and Iron test kit combines the best of both worlds. The kit includes 25 quick, easy and accurate tests using a simple dip-and-read formulation. The strips are packaged in a unique hinged, waterproof PopTop bottle with a desiccant liner that protects the…

QUANTOFIX Sulphite semi-quantitative test strips for the determination of sulphite in solutions. Measuring range: 0-10-25-50-100-250- 500-1000 mg/L SO32-

QUANTOFIX Nitrate semi-quantitative test strips that are especially useful for dairy industry where low levels of nitrate need to be monitored. Measuring range: 0-5-10-25-50-75-100 mg/L NO3- 0-0.5-2-5-10-25-50 mg/L NO2-

VISOCOLOR Powder Pillows pH reagent set for photometric determination of pH value. Ideal for low and highly buffered samples, like pool or drinking water. Measuring range: pH 6.2-8.2

QUANTOFIX Multi stick for aquarium owners are the semi-quantitative test strips for the determination of the total hardness (Ca 2+ , Mg 2+ ), carbonate hardness (HCO 3 -, CO 3 2-) and the pH value of aquarium water. Measuring range: 0-6.3-12.5-18.8-25.0-31.3 °e (total hardness)…