The LaMotte nitrate #2 CTA tablet is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…

Octet Comparator Method For determining cadmium in water using Dithizone method; commonly occurs from the deterioration of galvanized pipe Octet comparator has color standards representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 ppm cadmium. For use only where organic matter is absent and…

The Free Chlorine and pH Analyzer test kit is designed to measure Free Chlorine levels from 0.5 to 10.0 ppm and pH from 6.8 to 8.2. The Free Chlorine and pH tests are measured using tablet reagents with a convenient DipCell comparator. The kit includes easy to read multilingual (English,…

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

Most Widely used DPD Chlorine Tablets for Determining Free and Combined Chlorine DPD chlorine tablets employ DPD indicator (diethyl-p- phenylenediamine) to distinguish levels of free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument…

Seven important factors for monitoring incoming water supplies, break, suds and bleach operations; also rinse and sour operations. The pH (alkaline) test uses a LaMotte Octa-Slide 2 Comparator. The alkalinity tests, chlorine bleach and hardness test utilize dropper pipet test methods. Reagents are…

Drop Count Method For determining sulfite in water Employs modified APHA Method 428 One drop equals 5 ppm SO₃ Sufficient for 50 tests at 100 ppm

The ColorQ Pool 4 measures four basic pool and spa tests, Free Chlorine (0 to 10 ppm); Total Chlorine (0 to 10 ppm); Bromine (0 to 22 ppm) and pH (6.5 to 8.5 pH). As a bonus, the ColorQ Pool 4 can also measure Total Alkalinity (Code 7038-G), Calcium Hardness (Code 7041-G and 7042-G), and Cyanuric…

The LaMotte phosphate reagent refill is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

This kit tests for nitrate nitrogen using the LRC Comparator. Range/sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0 ppm NO₃--N. Applications: Food and Beverage, Environmental Education, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater

Octet Comparator Method (9859C70 and C71) For determining ammonia nitrogen in water using Nessler method Octet Comparator has color standards representing 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0 and 8.0 ppm ammonia nitrogen Sufficient for 50 tests Octa-Slide Comparator Method…

This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

No. 7436-01 Determines corrosion conditions in water supplies which can introduce lead and heavy metals Supports a water supplier’s lead abatement program in drinking water Includes TDS pocket tester to meet EPA requirements for corrosion testing Packaged in a portable…

The LaMotte DPD #1 free chlorine reagent tablet is compatible for use with calorimeter. It is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

For determining available chlorine in chlorine bleach or hypochlorite solutions Range: 1 drop = 0.005%, 0.05% or 0.5% Cl Sufficient for 50 tests at 0.1, 1.0 or 10%

In this Sodium Hydroxide Test Kit a sample is reacted with barium to precipitate any carbonates, then is titrated with a standard acid to the phenolphthalein endpoint. Range/sensitivity is 0-10%/0.2% NaOH # Tests (# Rgts) is 50 at 10% (4) The Sodium Hydroxide Test Kit contains…

The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.

Octet Comparator For determining total iron (dissolved, suspended and collodial) in natural waters Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace…

Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

Octet Comparator Public health outfit for determining free and total chlorine, monochloramine, dichloramine, chlorine demand, bromine, iodine and pH of water Employs DPD tablet method Low range DPD chlorine Octet Comparator has color standards representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and…

Applications: Industrial Water Boiling and Cooling This test kit measures for Chlorine or Bromine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl or Br.

This Nitrate Nitrogen Test Kit tests for nitrate nitrogen levels using cadmium reduction which undergoes diazotization/coupling to form a pink color. Levels are determined using the Octa-Slide 2 comparator Range and sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…

The Model SD Monitoring Kit was specifically designed and manufactured to meet US EPA requirements for field test procedures approved in the Federal Register (Volume 55, No. 217), to monitor illicit storm drain connections. Each unit includes tests for pH, Total Chlorine, Total Copper, Phenols,…

For determining salinity (as chloride content) of water Employs modified APHA Argentometric method Range of 0 to 20 ppt salinity in 0.4 ppt increments Sufficient for 50 tests at 20 ppt 

Applications: Industrial Water Boiling and Cooling, Water and Wastewater This kit tests for Molybdenum using the Test Strip method. Range/sensitivity is 0, 0.5, 1, 2, 5 ppm.

Low Range, 0-2500 ppb. 25 test strips.

4790 OctaSlide Comparator For determining Diethylhydroxylamine (DEHA) concentrations by way of iron reduction method Octa-Slide comparator provides 8 standards between 0.05-1.5 ppm Three reagents perform 100 tests

Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl₂ in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

This kit tests for Phosphate using the Octa-Slide 2 Comparator. Range is 1.0 - 10.0 ppm (PO₄) and 10 - 100 ppm (PO₄). Applications: Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater  

This kit tests for Total Hardness by using the Direct Reading Titrator Method. All results are as CaCO₃. Range/sensitivity is 0-200 ppm/4ppm CaCO₃. Applications: Industrial Water Boiling and Cooling, Water and Wastewater # Tests (# Rgts): 50 at 200 ppm (3)