Powerful performance Based on your requirements, choose from capacities of 3, 6 or 12L/hr Lasting economy Water purification progresses through independent cartridges with Aquastop quick connects for fast replacement. Module 1 - Combination of pretreatment and the reverse…

FI-Streem III for general lab uses Four and eight liter/hour Glass components assure virtually no leaching of impurities into the distilled water Microprocessor controlled Easy to operate membrane-type touch pad control panel Patented vapor trap eliminates carry-over of vapor-borne water…

A benchtop water purification system with an integrated Reverse Osmosis (RO) membrane cartridge, which prolongs your consumables’ life. That means you can expect that your unit will perform excellently in the lab as it should. Not only that, but WE200 comes with membrane filters. These add another…

Replacement cartridges for Millipore® Water Systems High quality resins Guaranteed performance Economically priced Why buy expensive cartridges when these high quality, inexpensive alternatives are available! PUREpack™ cartridges are guaranteed to provide ultrapure…

For laboratory pre-treatment up to 350 L per day for less critical applications such as glassware washing Supplied complete with a 30 L atmospherically-vented storage reservoir Microprocessor controlled allowing for fully-automatic operation; automatic flush Built-in pressure switch…

Fully automatic operation High purity pyrogen free output Low temperature distillate Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed Supplied with wall mounting bracket Safety features allow unattended operation Simple to…

arium® mini plus Pre-treatment Cartridge Efficient purification via a combination of activated carbon, a catalyst and a downstream reverse osmosis membrane. Optimized adsorption of impurities through high-grade activated carbon Best removal of oxidation agents such as chlorine…

LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure…

The Opti-Chem Personal Parallel Purification System puts purification and work-up in the hands of every synthetic chemist with fast and reliable results.Designed to match the requirements of drug discovery applications, a variety of Opti-Chem micro titer plate footprint collection blocks holding…

The CLïR 3000 Series High Purity Water System provides 4.0 liters per minute* of 18.2 megohm water. A quiet recirculation pump ensures constant water purity. Standard equipment includes a built-in pressure regulator and a 0.2 micron final filter to remove bacteria. Water quality meets or…

The LabStrong Fi-Streem part number 857X11LS is the direct replacement of the Thermo Scientific Barnstead Fi-Streem part number 857X11. The printed circuit board is a replacement part for Fi-Streem Water Purification Stills.

Model D2 Mega-Pure Deionizer System (3923J40) For removing ionized materials from feedwater by means of ion exchange cartridge; an adsorption type cartridge can also be used to remove organic materials (bacteria and pyrogens are not removed) Cartridge replacement is simple and fast Flow rate…

For photooxidation of organics.

Deionizer Produces 19 to 38 liters per hour Can be used with any PCS cartridge - most often used with ULTRApure or high capacity-type Point of use polishing of pre-treated water or single stage treatment of tap water Equipped with direct reading purity meter Resistivity…

The HPL-RO system uses feed water pressure to purify the water through a reverse osmosis membrane. The 4-stage filtration process reduces dissolved salts and organics from the water. The permeate water is conveniently stored in storage tank while the concentrated salts are sent to drain. The…

The LabStrong B00122 20 Liter HDPE water storage carboy allows for fully automatic operation when connected to Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The LabStrong B00123 20 Liter HDPE water storage carboy allows for fully…

General description Floating ball type with joints. Highly efficient column for atmospheric distillations. Effectively separates close boiling materials. One ball per section. Legal Information Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

0163B43 (06276LS): The LabStrong Fi-Streem part number 06276LS is the direct replacement of the Thermo Scientific Barnstead* Fi-Streem part number 06276. The condenser is a replacement part for Fi-Streem Water Purification Stills. Prior to installation of the condenser, salt must be emptied from…

Can produce up to 2 liters per minute of 18.3 megohm-cm Type 1 Reagent Grade Water All materials in contact with water are virgin polypropylene or other inert materials to prevent re-contamination of the water A continuous re-circulation pump supplies ultrapure water upon demand without…

The LabStrong FL0016-1 Final Filter is comparable to the Thermo Scientific Barnstead* D3750 Final Filter. The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems. The final filter can be used with all Thermo Scientific Barnstead B-Pure*, E-Pure*…

Maintain your Thermo Scientific™ Barnstead™ point of use water purification systems with replacement Thermo Scientific™ Barnstead™ Cartridges.

Softeners in the Model S Series are designed to produce a large volume of high quality softened water. Each softener has a faucet adapter that easily connects to any faucet. As water passes through the chamber, the resin column causes scale-forming calcium and magnesium ions to be exchanged for…

Convenient, economical, high quality modular water filtration systems which operates on city water pressure and can be easily be expanded to fit most lab needs. No electricity required. Up to 18 megohm water quality can be achieved with these cartridges. Consistent source of high quality…

The LabStrong CMX25LS Cleaning Syringe is comparable to the Thermo Scientific™ Barnstead™ CMX25 Cleaning Syringe. The cleaning syringe is designed for use with EASYpure™ II LF, EASYpure UV, EASYpure UV/UF, NANOpure™ Infinity and NANOpure DIamond™ water purification…

This product is designed to remove the most of the particles, organic compounds and chlorine from tap water to protect RO membranes.

All GenPure systems exceed international standards ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW. xCAD remote dispenser xCAD is short for “Extended Control and Dispenser” The system provides more flexibility for ultrapure water dispensing with an action…

This product is designed to remove most of the ions, organic carbons and particulates.

The Barnstead LabTower EDI system delivers up to 200L/day of Type 1 ultrapure water (18.2 megohm) or Type 2 pure water (10-15 megohm) from a tap feed water supply. Water product quality exceeds international standards ASTM Type 1 with a resistivity of 18.2 megohm and TOC 1-5ppb with…

Space saving design Fully automatic microprocessor controls Automatic drain reduces frequency of cleaning Fully automatic operation in a compact still Dual-fed capability provides for tap or pretreated water Low water protection prevents heater damage Unique vapor trap eliminates…

Count on the Thermo Scientific Aquanex Ultrapure Water Purification System for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment. The Thermo…

All GenPure systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW Integrated feed water monitoring An additional measuring cell monitors feed water conductivity. Any exceeding of the limiting value is immediately displayed maximizing cartridge…