Water Still

Product Dimensions (l x w x h) : 0x10.75x5.25in Merit Water Still (3915N02) Replacement Condenser. 

…Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water Easy to install and use…

…if no water is present in boiler, preventing damage to still Power remains off until reset manually UL listed; for 120 V, 50/60 Hz. Electric Heating Elements Two 650-watt elements are required for 1/2-gph stills Four 650-watt elements needed for 1-gph stills Six…

…device will detect any reduction in the flow of cooling water to below the required level and will turn off the still before it can overheat. Sensing the flow of cooling water rather than its pressure is safer and allows the still to run normally on low pressure supplies down to 3psi (20kPa).…

…Prevents overflow if the still is inadvertently left switched on when unattended. With two independent safety thermostats to prevent over heating in the event of an interruption to the water supply. The unique condenser design ensures that the droplets of distilled water remain in contact with…

…purified water Vented condenser allows for stripping of gaseous impurities Unique deconcentrator removes scale forming impurities Economical, portable - ideal for educational and other labs with moderate pure water requirements Produces high quality distilled water at the…

Product Dimensions (l x w x h) : 14.75x4.75x12.5in Merit Water Still (3915N02) Replacement Boiler  

…with a host of other features which comparable stills cannot match. Built in acid addition funnel and drain valve allow easy descaling without dismantling the glassware. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the…

Simple operation and highly dependable, for producing biologically pure, pyrogen-free water Water Stills (3915G20 and M50) Choose from three models depending upon your specific volume needs Features a vertical condenser for maximum efficiency and removal of gaseous impurities …

…include fully automatic controls Standard equipment includes low water cutoff to protect heating elements from burnout when water supply is interrupted and a Q-Baffle® to remove pyrogens 3911H10 Still’s dimensions 14” x 22” x 29” high; furnished with outlet…

…microprocessor controls Automatic drain reduces frequency of cleaning Fully automatic operation in a compact still Dual-fed capability provides for tap or pretreated water Low water protection prevents heater damage Unique vapor trap eliminates carry-over of impure vapor born droplets…

…Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The high density polyethylene tank employs a space saving design that can be wall or bench mounted. Additionally, it contains a convenient sight window for observation of the water level as…

Product Dimensions (l x w x h) : 5x5x14.5in Merit Water Still (3915N02 ) 220V Heater Element 3kw. 

…provides simple and effective cleaning of the still. Flow of cooling water automatically maintained for tap and pretreated water. Thermistor and heat sensor provide double protection against low water operation. Low water cut-off is included. Stills are CSA approved; 240 V 50/60 Hz. 15 amps for 4…

Microprocessor control ensures accurate and stable setpoints for temperature and stirring speed Electronic feedback controls monitor either top plate surface or liquid temperature (when using external PTFE-coated probe, included) and adjust to setpoint Single control knob controls heat and…

…current through the element encounters resistance, resulting in heating of the element. The heating of the element causes the water in the boiler of the glass still to boil. This heating allows for the process of distillation to occur. The heating element provides outstanding quality at a lower…

This 250mL capacity PYREX® solvent still head is used for maintaining oxygen free solvents. Head has sufficient storage space to allow solvent removal by syringe or drainage through 2mm T-bore PTFE (Polytetrafluorethylene) stopcock. It has a 24/40 Standard Taper outer joint at top, 24/40 Standard…

…Barnstead™ Cabinetized Still, an all-in-one water distillation solution. This solution includes a still and an appropriately matched tin-coated storage tank in a compact storage cabinet. Systems are fully automatic and designed for point-of-use installation. Produce water pure enough for…

The LabStrong Fi-Streem part number 857X11LS is the direct replacement of the Thermo Scientific Barnstead Fi-Streem part number 857X11. The printed circuit board is a replacement part for Fi-Streem Water Purification Stills.

… An optional clear polycarbonate gable cover can be used to prevent bath evaporation and still allow the sample to be viewed. While not in use, the gable cover may be attached to the side of the water bath during operation to provide a means for condensation to flow back to the chamber; reducing…

SHEL LAB Reciprocating Water Baths deliver precise temperature control and a smooth reciprocal shaking motion. Temperature and oscillation controls feature an easy to read P.I.D. microprocessor temperature controller and an independent safety thermostat. The bath may be used with or without…

…eliminate RNAse activity. Our DEPC-treated water is made using the least amount of DEPC that is still effective at destroying enzymatic activitiy in RNases and other proteins, making it ideal for RNA extraction and all molecular biology applications. Water is autoclaved both before and after…

…eliminate RNAse activity. Our DEPC-treated water is made using the least amount of DEPC that is still effective at destroying enzymatic activitiy in RNases and other proteins, making it ideal for RNA extraction and all molecular biology applications. Water is autoclaved both before and after…

…achieve optimal water quality for hundreds of high-purity applications ranging from semiconductor manufacturing, to dialysis, to ultra-pure water for genetics. In fact, ResinTech media is still the essential ingredient powering 18MΩ purity in many of today’s leading high-purity lab water…

…achieve optimal water quality for hundreds of high-purity applications ranging from semiconductor manufacturing, to dialysis, to ultra-pure water for genetics. In fact, ResinTech media is still the essential ingredient powering 18MΩ purity in many of today’s leading high-purity lab water…

Microscale size solvent still that allows continuous reflux of solvents with stopcock open and collection of pure solvent when closed. Capacity of collection bulb is 15mL and has side port with cap and septum for syringe removal of contents. Still has 2 mm bore PTFE stopcock, 14/20 joints top and…

The black “T” piece of John Guest fitting (PM-012) is a replacement part for the Fi-Streem™ Water Purification Stills.

Capacity 6 liters With size 53 polyethylene screw cap, polyethylene spigot and overflow tube which takes 3/8” i.d. tubing Height 16 1/4”; as furnished with Thomas number 3915G20 Water Still

…pipe, S/V to “T” piece is a replacement part for the four liter and eight liter per hour bi-distilled Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 857X28LS is the direct replacement of the Thermo Fisher Scientific™ Barnstead™…