Glass Still

By closing stopcock, serves as a reflux condenser; open serves as a still head for Claisen type distillation. Top joint can be used for thermometer or cold finger condenser insertion. Side vent enables head to be used in vacuum distillation. Jacketed section 140mm.

Obtain high purity water from distillation using Thermo Scientific™ Barnstead™ Mega-Pure™ glass stills, constructed of non-leaching components. These glass stills effectively remove inorganic solids, organics with boiling points higher than water, bacteria and pyrogens. Available in five production…

…reliability. Automatic control activates still as required to maintain a full reservoir. Automatic drain cycle combats build-up of scale, reducing the frequency of clean-up required. Unique cleaning cycle provides simple and effective cleaning of the still. Flow of cooling water automatically…

…design Fully automatic microprocessor controls Automatic drain reduces frequency of cleaning Fully automatic operation in a compact still Dual-fed capability provides for tap or pretreated water Low water protection prevents heater damage Unique vapor trap eliminates carry-over…

Manufactured in the United Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water …

… Silica sheathed heaters All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Fitted with a control device to turn off the heater when the collecting reservoir is full. Prevents overflow if the still is inadvertently left switched on when…

Reflux Solvent Still, Microscale, Synthware, Capacity: 25mL, Joints: 14/20, Stopcock Bore: 2mm.

Used for volatile fatty acid test; ASTM D-1076. Fabricated from standard wall tubing throughout. Hose connections on still are size D; on condenser, size C.

Obtain high purity water from distillation using Thermo Scientific™ Barnstead™ Mega-Pure™ glass stills, constructed of non-leaching components. These glass stills effectively remove inorganic solids, organics with boiling points higher than water, bacteria and pyrogens. Available in five production…

The LabStrong 40 Liter Storage Tank allows for fully automatic operation when connected to Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The high density polyethylene tank employs a space saving design that can be wall or bench mounted.…

…heating element for Thermo Scientific Barnstead Mega-Pure™ Glass Stills. The 120V 1000w heating element is suitable for operation in the MP-1 (Model numbers A440266 and A440267) Thermo Scientific Barnstead Mega-Pure Glass Stills. The LabStrong heating element offers a new and improved…

…hour. Storage bottles are available for the MP-3A, MP-6A and MP-12A stills. See 3915Q55 for automatic collection bottle. Flow Meter (3915L90) For use with Barnstead models MP-3A, MP-1 and MP-6A Water Stills Glass flow tube is graduated 5 to 65 cc/min. in intervals of 5 cc/min …

…2-gph stills Elements are installed in parallel for 120-volt service; the same elements can be used in 240 V stills by parallel installation of series - connected pairs. Pretreatment Kit for glass stills Can be easily attached directly to glass stills (excluding 2-liter still) …

Solvent Still Head Capacity: 500 and 1000mL available Top Joint: 24/40 Bottom Joint: 24/40 Side Joint: 14/20

Glass Membrane Sensor High accuracy Reliable Economical Glass sensor electrodes are the best available method for measuring sodium ions. They are less expensive than solid state or dry sensing membranes and still offer a high degree of accuracy and responsiveness. …

Jacketed distillation head for distilling samples up to 3mL Jacket allows positioning of a coolant such as dry ice/acetone at site of desired condensation, thus reducing loss of valuable sample.Distillate can be removed with a Pasteur pipet. With outer 14/20 joint at top and 14/20 inner at…

Hickman Still Head, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Microscale Hickman Still Head used to carry out micro sample fractional distillations. With outer joint at top externally threaded to allow a O-RING-CAP-SEAL connection with mating male joint and inner joint at bottom. Supplied with cap, O-Ring and septum. Available with ex-ternally threaded outer…

Solvent Still Head, Repurification Joint: 24/40

This 500mL capacity PYREX® solvent still head is used for maintaining oxygen free solvents. Head has sufficient storage space to allow solvent removal by syringe or drainage through 2mm T-bore PTFE stopcock It has a 24/40 Standard Taper outer joint at top, 24/40 Standard Taper inner…

Zero holdup, no-splash short path still for small quantity distillations with the accuracy of larger setups. Improved design eliminates even the minimal holdup experienced with original short path stills by further reducing wetted surfaces and travel p

A short path still designed to be effective with high boiling point materials at low pressure where moderate foaming and slight bumping can be tolerated. A fine tip adjustable gas inlet tube can be used for stirring or as a foam breaker. One-piece cow

Solvent Still Head, High Vacuum Valves Capacity: 250mL Joints: 24/40 Valve Size: 0-4mm

Solvent Still Head Capacity: 500 and 1000mL available Top Joint: 24/40 Bottom Joint: 24/40 and 29/42 available Side Joint: 14/20 Drainage Port Joint: 14/20

Hickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Hickman-Hinkle Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Angled hose connector for LabStrong™ Fi-Streem™ II and III stills. Parts are typically available to ship immediately to limit down time in the lab.The glass condenser is a replacement part for the Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 562X1LS is the direct…

… Arms are approximately 75° apart Equipped with inner Standard Taper joints that are both 24/40 Often used as a still head adapter Still Head Standard Taper Connecting Tubes (5738H82 and L18) Sidearm is at an angle approximately 75° from the lower joint …

…reduction in the flow of cooling water to below the required level and will turn off the still before it can overheat. Sensing the flow of cooling water rather than its pressure is safer and allows the still to run normally on low pressure supplies down to 3psi (20kPa). As a fail-safe device there…

…staining with wells still attached - Slide holder protects slide from damage Applications:Cell Growth, Immunocytochemistry of Fixed or Live Cells, Microscopy Synonyms: Chamber slides Application: Simplify your cell analysis by using the Millicell EZ SLIDE 8 well glass slide to culture, fix,…

…Amber Glass Boston Round Bottles are glass Boston Rounds that have been coated in a layer of Plastisol. These plastic-coated Boston Round bottles are easier to grip and harder to break than ordinary glass bottles, yet still offer the chemical resistance and UV protection of amber glass. If the glass…

…perfectly-fitting plastic coating. These plastic-coated glass Boston Round bottles are easier to grip and harder to break than ordinary glass bottles, yet still offer the chemical resistance and minimal interference of glass. In the case that the glass does break, the plastisol coating will contains…