Consistent water quality Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity Compact mobile design …

The General Chemistry/UF cartridge kit includes one activated carbon cartridge and three nuclear grade, mixed bed cartridges. The HPLC/Hybrid cartridge kit includes one activated carbon cartridge and two nuclear grade, mixed bed cartridges and one organic adsorption cartridges. The hollow fiber…

Maintain your Thermo Scientific™ Barnstead™ point of use water purification systems with replacement Thermo Scientific™ Barnstead™ Cartridges.

Contains virgin ion-exchange resins for Elix® 20/35/70/100 systems.

With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105° angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

Qualification documents Binder digital in PDF format - IQ/OQ documents, Qualification documents Binder hard copy inside folder - IQ/OQ documents - supporting documents for validation performed by customers, consisting of: IQ/OQ checklists incl. calibration guide and comprehensive unit…

Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, ultraviolet light for bacteria sterilization and TOC reduction, and ultrafiltration for pyrogen removal and nuclease free water. As water exits the system, a final…

Replacement filter cartridge for Tuttnauer® PUREWISE™ 9000 Water Distiller is used to further enhance water quality. Extracts any volatile organic compounds (VOCs), further enhancing water quality Filters are recommended to be changed out every 6-months of use Filter…

For Simplicity® systems.

Adenovirus and lentivirus purification kits utilize Sartobind® ion exchange membrane chromatography technology for fast and safe virus purifcation in volumes from 20 ml to 1000 ml. These ready to use kits contain all buffers and devices needed for quantitative yield virus purification in only a few…

The Barnstead LabTower EDI system delivers up to 200L/day of Type 1 ultrapure water (18.2 megohm) or Type 2 pure water (10-15 megohm) from a tap feed water supply. Water product quality exceeds international standards ASTM Type 1 with a resistivity of 18.2 megohm and TOC 1-5ppb with…

Product Dimensions (l x w x h) : 0x10.75x5.25in Merit Water Still (3915N02) Replacement Condenser. 

Can produce up to 2 liters per minute of 18.3 megohm-cm Type 1 Reagent Grade Water All materials in contact with water are virgin polypropylene or other inert materials to prevent re-contamination of the water A continuous re-circulation pump supplies ultrapure water upon demand without…

Model D2 Mega-Pure Deionizer System (3923J40) For removing ionized materials from feedwater by means of ion exchange cartridge; an adsorption type cartridge can also be used to remove organic materials (bacteria and pyrogens are not removed) Cartridge replacement is simple and fast Flow rate…

Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and pyrogen removal ultrafiltration. As water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications.

Choose from an array of Thermo Scientific™ Deionizer Cartridges based on your application needs. These cartridges are for use with the Thermo Scientific™ Barnstead™ Bantam™, B-Pure™ or Nanopure™ water purification systems.

Use Thermo Scientific™ Pretreatment Cartridges and Filters when the quality of your feed water doesn't match the requirements for your Thermo Scientific™ Barnstead™ water purification system.

The LabStrong FL0016-1 Final Filter is comparable to the Thermo Scientific Barnstead* D3750 Final Filter. The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems. The final filter can be used with all Thermo Scientific Barnstead B-Pure*, E-Pure*…

The preformed nylon pipe, S/V to “T” piece is a replacement part for the four liter and eight liter per hour bi-distilled Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 857X28LS is the direct replacement of the Thermo Fisher…

0163B43 (06276LS): The LabStrong Fi-Streem part number 06276LS is the direct replacement of the Thermo Scientific Barnstead* Fi-Streem part number 06276. The condenser is a replacement part for Fi-Streem Water Purification Stills. Prior to installation of the condenser, salt must be emptied from…

Remote Dispenser attaches easily to the Nanopure® system and allows water to be delivered up to 8 feet away from unit. Design virtually eliminates any dead volume and the coiled tube allows for easy use while taking up a minimal amount of space. Printer provides paper documentation of the unit…

The LabStrong D8900LS Hose Nipple Cartridge Wall Mount Holding Bracket is comparable to the Thermo Scientific™ Barnstead™ D8900 Hose Nipple Cartridge Holder. The LabStrong D8900LS Hose Nipple Cartridge Wall Mount Holding Bracket can be used with all LabStrong hose nipple and straight…

Vivaflow 50 and 200 systems are ready-to-use ultrafiltration modules for crossflow filtration of samples up to 5 Liters. These novel systems offer a standard of ease of use, performance, flexibility and economy which is unrivaled by any laboratory or pilot scale filtration system in the market.…

The cartridge is designed to efficiently remove large particles, organic compounds and free chlorine from tap water to protect RO membranes against fouling, scaling and chlorine attack in a large Elix or RiOs water purification system.

Compact, flexible systems provide Type 1 water purity at a reasonable price Ideal where requirements are less than 15 liters per day Microprocessor purity monitor provides digital readings of resistance Space-saving design Six models to choose from: Batch Feed (RF), Line Feed (LF),…

Hydranautics SWC seawater desalination membranes are high productivity elements offering the highest levels of salt rejection and a consistently pure end product. Membrane formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven…

Most Filmtec™ brackish water elements are cleanable over a wider range than most competitors elements (1-13 pH) which allows better lifespan and performance on tough surface waters. BW30XFR elements from Filmtec™ offer superior salt and silica rejection for industrial process waters…

Accessories for Vivacon 2 and 500 centrifugal concentrators.

Mini version of the SW6 that accepts two samples (without timer function). The case incorporates a handle for easy transportation. Accepts six samples Digital indication of speed and time Two pre-set programs Built in illumination for easy viewing of samples For …

This product is designed to remove most of the ions, organic carbons and particulates.

Microprocessor control ensures accurate and stable setpoints for temperature and stirring speed Electronic feedback controls monitor either top plate surface or liquid temperature (when using external PTFE-coated probe, included) and adjust to setpoint Single control knob controls heat and…