Lab Glass Tubing
Tubing is manufactured from the finest quality material of borosilicate glass, which provides excellent heat resistant properties to thermal shock, chemicals, and good mechanical strength. Pyrex glass tubes are available as long glass tubing and soft glass tubing to suit various experimental needs.
Laboratory glass tubing is available in various lengths and diameters, including 5mm glass tubes and 10mm tubing. Borosilicate glass tubing is also available in multiple thicknesses to accommodate different applications. Glass delivery tubes can beheld together with clips and clamps to create an excellent firm seal.
Glass delivery tubes are easy to clean and compatible with various cleaning accessories, including tube washers. Accessories available and compatible with glass tubing also include tube liners and solvents.
-
5mm Screw-Cap NMR Tubes
SP Wilmad-LabGlassCommonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.
-
Bruker SampleJet NMR Tubes
SP Wilmad-LabGlassAuthentic Bruker® SampleJet® cap without code, up to 600 MHz. Do not use with Ceramic spinners.
-
5mm O.D. Quick Pressure Valve (QPV) NMR Sample Tubes
SP Wilmad-LabGlassWilmad Quick Pressure Valve Sample Tubes are specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents. Due to the nature of glass, Extreme Caution should be…
-
4mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Pyrex® NMR Capillary Tubes
SP Wilmad-LabGlassWilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field
-
5mm O.D. Thin Walled Economy NMR Tubes
SP Wilmad-LabGlassDesigned for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…
-
Gas Collecting Tube, with Sampling Port
Ace GlassStandard collecting tube with glass stopcock and capillary tubing for connecting to rubber tubing and syringe sampling port with septum. Available with either glass or 1:5 taper PTFE stopcock plugs. For replacement stopcock plugs, see 8223 (PTFE), 8224 (glass).
-
304 Stainless Steel adapter for matching glass beaded process pipe to female NPT fittings, gauges and flanges.
-
NMR Tubes for Bruker® MicroProbe and MicroCryoProbe
SP Wilmad-LabGlassTen times more precise in terms of camber and concentricity than capillary tubes. Ideal for Ultra-High Field (>600MHz) experiments Recommended for Bruker® MicroProbe and MicroCryoProbe Includes disposable cap
-
Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…
-
10mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
Process pipe padded hanger with mounting foot.
-
Rotor and Caps for Bruker® MAS Probe
SP Wilmad-LabGlassManufactured from the highest purity Zirconia, Wilmad MAS Rotors provide the ultimate solution for analysis of solid samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and…
-
14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,
-
X-Band Economy Brand EPR Suprasil® Tubes
SP Wilmad-LabGlassWilmad X-Band Economy Brand EPR Suprasil® tubes are manufactured from synthetic quartz which has 20 fold less paramagnetic impurities than naturally occurring quartz. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination …
-
Adapter, Feed Tube, Septum
Ace GlassThreaded both ends and with additional #7 threaded side opening for introduction of samples by hypodermic syringe. #7 thread at top is supplied with 5029 Nylon bushing and Fetfe O-ring for use with 5831, 5832 adjustable feed tubes. Size listed is Ace-thred designation which refers to I.D. of tubing…
-
8mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
10mm O.D. Economy NMR Tubes
SP Wilmad-LabGlassWilmad-LabGlass 10 mm Economy NMR Tubes are manufactured from borosilicate glass that meets the ASTM Type 1 Class B standard and recognized as N51A. Due to its nature, this glass has much less thermal-shock resistance than Class A glass used for our Precision Tubes. It may contain Fe2O3 which is…
-
5mm O.D. Medium Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
5mm Micro Cell Assembly
SP Wilmad-LabGlassSample volume can be as little as 18µL 3 different inserts with various shapes (Spherical Bulb, Capillary Tube and Cylindrical Bulb) Outer tube (Precision Thin Walled) must be ordered separately depending on magnetic field strength Not recommended for variable temperature experiments…
-
Beaded Pipe To Sanitary Flange Adapter
Ace GlassTransition adapter to convert beaded pipe to sanitary flange. Available in 304 stainless steel or virgin PTFE.
-
-
SYNTHWARE NMR Tube Washer
Kemtech AmericaWith 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied…
-
15mm O.D. Heavy Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer
SP Wilmad-LabGlassWilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is…
-
Bubbler, No-Air
Ace GlassBubbler with metering valve for precise control of inert gas introduction and features 9mm OD tube-end side arms for use with 3/8in ID vacuum tubing.
-
Medium Tubing 1.75" X 0.09" X 48.25"
DWK Life Sciences (Kimble)33 expansion borosilicate glass tubing with cut ends. Medium wall precision bore tubing Tubing has a low coefficient of expansion and a high resistance to chemical attack Conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Low Pressure/Vacuum Suprasil® EPR Tubes
SP Wilmad-LabGlassWilmad’s low pressure/vacuum (LPV) Suprasil tube is ideal for anaerobic and gas-tight EPR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE…
-
Pressure Vacuum Valve NMR Tubes
SP Wilmad-LabGlassWilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…
-
5mm O.D. Thin Walled Suprasil® NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…
-
This PYREX® solvent recovery head allows for condensation and collection of solvents while performing concentrations with a Kuderna-Danish concentrator. 96-99% solvent recovery allows for concentrations to be done outside the hood. Unique, simple design allows use with existing condensers and flasks.
-
X-Band Precision Brand EPR Quartz Tubes
SP Wilmad-LabGlassWilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…