Lab Glass Tubing
Tubing is manufactured from the finest quality material of borosilicate glass, which provides excellent heat resistant properties to thermal shock, chemicals, and good mechanical strength. Pyrex glass tubes are available as long glass tubing and soft glass tubing to suit various experimental needs.
Laboratory glass tubing is available in various lengths and diameters, including 5mm glass tubes and 10mm tubing. Borosilicate glass tubing is also available in multiple thicknesses to accommodate different applications. Glass delivery tubes can beheld together with clips and clamps to create an excellent firm seal.
Glass delivery tubes are easy to clean and compatible with various cleaning accessories, including tube washers. Accessories available and compatible with glass tubing also include tube liners and solvents.
-
Thin Walled High Throughput NMR Tubes
SP Wilmad-LabGlassWilmad Thin Walled High Throughput NMR Tubes have an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW<250) samples up to 600 MHz. Camber and concentricity values listed are the Total Indicator Reading (TIR) Designed for routine use in most…
-
SYNTHWARE NMR Tube Washer
Kemtech AmericaWith 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied…
-
Pyrex® MAS Rotor Inserts
SP Wilmad-LabGlassDesigned for air-sensitive samples and semi-solid samples such as gels or highly viscous liquids, Pyrex® MAS Rotor Inserts allow samples to be sealed into an NMR rotor by heat-seal or epoxy. Note: A glove box may be required for sealing of air-sensitive samples.
-
304 Stainless Steel adapter for matching glass beaded process pipe to female NPT fittings, gauges and flanges.
-
5mm O.D. Thin Walled Suprasil® NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…
-
NMR Tubes for Bruker® MicroProbe and MicroCryoProbe
SP Wilmad-LabGlassTen times more precise in terms of camber and concentricity than capillary tubes. Ideal for Ultra-High Field (>600MHz) experiments Recommended for Bruker® MicroProbe and MicroCryoProbe Includes disposable cap
-
Pyrex® NMR Capillary Tubes
SP Wilmad-LabGlassWilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field
-
10mm O.D. Economy NMR Tubes
SP Wilmad-LabGlassWilmad-LabGlass 10 mm Economy NMR Tubes are manufactured from borosilicate glass that meets the ASTM Type 1 Class B standard and recognized as N51A. Due to its nature, this glass has much less thermal-shock resistance than Class A glass used for our Precision Tubes. It may contain Fe2O3 which is…
-
Pressure Vacuum Valve NMR Tubes
SP Wilmad-LabGlassWilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…
-
Rotor and Caps for Bruker® MAS Probe
SP Wilmad-LabGlassManufactured from the highest purity Zirconia, Wilmad MAS Rotors provide the ultimate solution for analysis of solid samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and…
-
Beaded Pipe To Sanitary Flange Adapter
Ace GlassTransition adapter to convert beaded pipe to sanitary flange. Available in 304 stainless steel or virgin PTFE.
-
10mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
Coaxial Inserts
SP Wilmad-LabGlassSwitch between three unique sample ratios during external referencing experiments Ideal for variable temperature experiments as materials is the same between the tubes and spacer In the complete set the insert and outer tube are fused together at the bottom. It is recommended for high field…
-
United Scientific™ Glass Tubing Cutter
United Scientific SuppliesCut glass tubes easily and safely. This handy tool allows you to cut glass tubes up to 1.5” in diameter. The spring holds the cutting wheel open so this can easily be operated with one hand. Spring loaded. Easy one-handed operation.
-
X-Band Economy Brand EPR Suprasil® Tubes
SP Wilmad-LabGlassWilmad X-Band Economy Brand EPR Suprasil® tubes are manufactured from synthetic quartz which has 20 fold less paramagnetic impurities than naturally occurring quartz. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination …
-
Screw Cap EPR Sample Tubes
SP Wilmad-LabGlassNow, sample tubes and storage vials have been joined! Save time and money with the Screw Cap EPR Tube; each come with a PTFE/Silicone Septum.
-
5mm Micro Cell Assembly
SP Wilmad-LabGlassSample volume can be as little as 18µL 3 different inserts with various shapes (Spherical Bulb, Capillary Tube and Cylindrical Bulb) Outer tube (Precision Thin Walled) must be ordered separately depending on magnetic field strength Not recommended for variable temperature experiments…
-
Susceptibility Matched Shigemi® Tubes
SP Wilmad-LabGlassShigemi tube features a susceptbility matched bottom and plunger for each of the following solvents: CDCL3 CD3OD D2O DMSO-d6 This feature would effectively reduce the boundary gradients at the edges of the coil. Therefore, it is no longer critical to keep the general NMR sample…
-
14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,
-
X-Band Precision Brand EPR Quartz Tubes
SP Wilmad-LabGlassWilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…
-
NMR Tube Carrier
SP Wilmad-LabGlassTry our handy pocket NMR/EPR tube carrier; holds one 5mm O.D., 7 inch length NMR/EPR tube. Pack of 3 white holders. Features a pocket clip that keeps it secure. Made from unbreakable polymer material with a snap-on cap. Protection is provided for the sample and lab personnel during transport.
-
8" FEP NMR Tube Liners
SP Wilmad-LabGlassFor NMR investigations where corrosive chemical compounds such as hydrofluoric acid, ammonium bifluoride and concentrated hydroxide solutions are present, Wilmad’s 8" FEP NMR Tube Liners fit 7" NMR tubes and provide a contamination-free environment. Round-bottom,…
-
5mm O.D. Heavy Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
5mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
Universal Solvent Jet NMR Tube Washer
SP Wilmad-LabGlassThe Universal Solvent Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing. By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends into the sample tube is adjusted to the proper length.…
-
This PYREX® solvent recovery head allows for condensation and collection of solvents while performing concentrations with a Kuderna-Danish concentrator. 96-99% solvent recovery allows for concentrations to be done outside the hood. Unique, simple design allows use with existing condensers and flasks.
-
Bubbler, No-Air
Ace GlassBubbler with metering valve for precise control of inert gas introduction and features 9mm OD tube-end side arms for use with 3/8in ID vacuum tubing.
-
Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…
-
COLUMN CHROM FRTD 22X300MM
SP Wilmad-LabGlassInside Height 22.0 millimeters Item Weight 1.10 pounds Length 25 millimeters Width 25 millimeters Material Borosilicate Glass
-
15mm O.D. Heavy Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
4mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer
SP Wilmad-LabGlassWilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is…