Glass Wall Tubing

Compare Tool

Select up to 3 products

Glass Wall Tubing
1 - 32 of 210
Sort
View
Show
  • PYREX® Standard Wall Glass Tubing

    Corning

    Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…

  • PYREX® Heavy Wall Glass Tubing

    Corning

  • Special Wall Borosilicate Tubing

    Chemglass

    Special wall Pyrex borosilicate tubing. Sold either by the length or by the case. *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Heavy Wall Borosilicate Tubing

    Chemglass

    Heavy wall Pyrex borosilicate tubing, see specifications tab at the bottom of this page. Sold either by the length or by the case, see suggested products tab at the bottom of this page.  *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Medium Wall Borosilicate Tubing

    Chemglass

    Medium wall Pyrex borosilicate tubing, see specifications tab at the bottom of this page. Sold either by the length or by the case, see suggested products tab at the bottom of this page.  *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Standard Wall Borosilicate Tubing

    Chemglass

  • Glass Tubing Assortment

    United Scientific Supplies

    This convenient one pound assortment of borosilicate glass tubing includes various thicknesses and wall sizes. All pieces are 12" in length.

  • Tubing 9mm od 2.0mm Wall

    Corning

    This PYREX® special wall tubing has an O.D. of 9mm and wall thickness of 2.0mm. It is 1219mm (48") long, ± approximately 6mm (¼") with ends cut and glazed or fire polished.

  • PYREX® Heavy Wall Rimless Ignition Tube

    Corning

    These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to…

  • Silicone Rubber Tubing

    DWK Life Sciences (Wheaton)

    tubing USP CLASS VI for medical, laboratory and pharmaceutical use Autoclavable, radiation sterilizable Thomas No. 0914P11 Peroxide cured silicone tubing. Assembly consists of 1.5m (5 ft.) section of silicone tubing with a wall thickness of 2.3mm, a borosilicate glass

  • Silicone Rubber Tubing 3mmx5Ft

    DWK Life Sciences (Wheaton)

    …demanding ultimate purity in fluid transfer and peristaltic pump operations. The tubing assembly consists of 1.5 m (5-foot) section of silicone or FKM tubing with a wall thickness of 2.3 mm and borosilicate glass sinker on one end and a polypropylene delivery nozzle on the other end.

  • Low-Density Polyethylene Tubing

    Thermo Scientific Nalgene

    …8010 Translucent; non-contaminating Less flexible than vinyl tubing, but with superior chemical resistance Tubing has sufficient flexibility and resilience to make a tight joint on glass or metal tubing; attachment is made easier if end is first softened by dipping into boiling…

  • Vinyl Food Tubing

    Dynalon

    Vinyl laboratory tubing with a wall thickness that is non-toxic, transparent and inert. This smooth and flexible tubing is chemical resistant with a specific gravity of 1.2 and a tensile strength of 2000 psi.  Our Vinyl Food Grade Tubing is designed for use in the laboratory with an elongation…

  • Medium Tubing 1.75" X 0.09" X 48.25"

    DWK Life Sciences (Kimble)

    33 expansion borosilicate glass tubing with cut ends. Medium wall precision bore tubing Tubing has a low coefficient of expansion and a high resistance to chemical attack Conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • KIMAX Heavy Wall Filter Flasks

    DWK Life Sciences (Kimble)

    Heavy glass with side tubulation for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and slippage…

  • Keck Ramp Clamp Tubing Clamps

    Oakton

    glass connections.Unique wheel-in-groove clamp design permits one-handed flow control. Simply remove wheel to insert tubing, then roll wheel back into clamp to your desired flow rate. Made of pure PBT, these clamps are safe to 392°F (200°C). All four sizes accept tubing with a maximum wall

  • Glass Cylinders

    United Scientific Supplies

    Borosilicate glass cylinders with pour spouts feature heavy uniform wall tubing and a removeable, sturdy plastic base. All cylinders come with bumper guards. Single metric scale, accuracy per Class "B".

  • Heavy Wall Vacuum Tubing, Excelon

    Chemglass

    Features: Equivalent to Tygon® R3603, Nalgene™ 180 Excellent alternative to latex More cost-effective than silicone Inner bore prevents any build-up Withstands autoclaving gamma sterilization Durometer hardness (shore A): 55 Temperature range: -58°F to 165°F…

  • FEP Tubing, Fluoropolymer Tubing, Heavy Wall

    Chemglass

    FEP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4" OD glass connections.

  • PYREX® Heavy Wall Centrifuge Bottles

    Corning

    …heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy wall, the actual…

  • PYREX Heavy Wall Filtering Flasks

    Corning

    Heavy walls Graduated Replaceable tube These PYREX heavy wall flasks have a seated bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish…

  • Silicone Rubber Tubing 6mm X 5 Ft

    DWK Life Sciences (Wheaton)

    …demanding ultimate purity in fluid transfer and peristaltic pump operations. The tubing assembly consists of 1.5 m (5-foot) section of silicone or FKM tubing with a wall thickness of 2.3 mm and borosilicate glass sinker on one end and a polypropylene delivery nozzle on the other end.

  • Mini Pump Tubing Sil, 2mm X 5Ft

    DWK Life Sciences (Wheaton)

    …demanding ultimate purity in fluid transfer and peristaltic pump operations. The tubing assembly consists of 1.5 m (5-foot) section of silicone or FKM tubing with a wall thickness of 2.3 mm and borosilicate glass sinker on one end and a polypropylene delivery nozzle on the other end.

  • Class B, Glass Graduated Cylinders

    United Scientific Supplies

    Cylinders comply with ASTM E-1272, Class B standards. Double metric scale, calibrated to contain. Borosilicate glass cylinders with pour spouts feature heavy uniform wall tubing and attached glass hexagonal bases. All cylinders come with bumper guards.

  • Glass Indicating Moisture Traps

    Agilent Technologies

    … Molecular Sieve 13X and a band of Indicating Molecular Sieve 4Å Available in 70 cc, 100 cc and 250 cc sizes Heavy wall borosilicate glass tube — no moisture diffusion Refillable The 100 cc unit will treat 10 standard “A” cylinders with up to 30 ppm…

  • Tygon S3™ E-3603 Laboratory Tubing for Vacuum Applications

    Saint Gobain

    …Vacuum Tubing: Non-DEHP, bio-based plasticizer is fully biodegradable Based on sustainable resources Safe for the environment; reduced end-user risk Tygon S 3™ E-3603 Vacuum Tubing has all of the same properties as the original E-3603 formulation, plus extra thick walls to support…

  • Borosil® Reusable Heavy Duty Test Tubes with Ground Glass Stoppers

    Borosil

    …borosilicate glass. Thick, uniform walls, excellent heat resistance, and rounded bottoms mean these tubes can be reused without issue. Each tube is graduated in metric units, and comes with a standard taper glass stopper. Borosil® Reusable Heavy Duty Test Tubes with Graduations and Glass

  • NMR Tube pH ElectrO.D.e

    Wilmad-LabGlass - SP Scienceware

    Compatible with 5mm Thin Walled NMR tubes, this electrode can measure pH range from 0 to 14 inside an NMR sample. For use in 5mm thin walled NMR tubes up to 8 inches in length Glass probe dimensions are 3 OD x 180 mm L pH Range: 0-14 Temperature Range: 0-70°C Resolution: 0.02…

  • 10mm O.D. Medium Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    …multi-dimensional, multi-nuclei, DNP experiments and studies involving biological samples) Made from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438 100% inspection with multiple NIST traceable gauges and optical surface defect checks Include disposable…

  • Tube Culture 6 X 50mm Cs720

    DWK Life Sciences (Kimble)

    Borosilicate glass KIMAX-51 glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. Designed from ASTM Specification E982, Type IV requirements. Reusable tubes KG-33 Glass Plain end Fire polished rim Without marking…

  • 10mm O.D. Heavy Walled Precision NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    …multi-dimensional, multi-nuclei, DNP experiments and studies involving biological samples) Made from borosilicate glass that meets the requirement of Type 1 Class A glass from ASTM E438 100% inspection with multiple NIST traceable gauges and optical surface defect checks Include disposable…

  • 10mm O.D. Thin Walled Quartz NMR Tubes

    Wilmad-LabGlass - SP Scienceware

    …Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness, with consideration of reflection loss) above 265nm that makes quartz tubes preferable in photochemistry studies Half the dielectric constant of Pyrex® glass helps improve…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.