Corning
-
These specially designed Netwell carriers and handles allow simultaneous processing of up to 12 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
Available in borosilicate or soda-lime glass PYREX® Pasteur Pipets are made from heat-resistant borosilicate Code 7800 glass Corning Pasteur Pipets are mode from economical soda-lime glass One-time use eliminates the danger of cross-contamination of valuable specimens or…
-
These PYREX® volumetric pipets are manufactured to Class A capacity tolerances as indicated by ASTM E-969. The rugged construction, colored enamel graduations and markings provide a pipet which will give good life and service.
-
These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to 600°C.
-
Corning® Matrigel® Matrix
CorningCorning extracellular matrices (ECMs) enable researchers to mimic in vivo environments for 2D and 3D cell culture applications. Corning Matrigel matrix is a solubilized basement membrane preparation extracted from the Engelbreth-Holm-Swarm (EHS) mouse sarcoma, a tumor rich in…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…
-
Flask Distilling 125mL.Pk 6
CorningThese 125mL heavy duty PYREX® distilling flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers…
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Corning Pipettor Tips
CorningFor consistency and reliability in small-volume liquid handling Gel-Loading Tips with Capillary Ends: Available in three different orifice configurations- 0.5 mm round, 0.4 mm flat and 0.2 mm flat- Costar gel-loading tips cover a wide range of applications. Tips are also available in…
-
PC-611 Stirrer
CorningThese Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful…
-
PYREX Petri Dish
CorningFlat, clear dishes will withstand repeated sterilization (wet or dry) The edges are beaded to provide greater mechanical strength; the bead also provides a means to equally space the side walls of the bottom and cover, thereby reducing the capillary action of condensed moisture on the sides …
-
Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
PYREX® Test Tubes
CorningWith lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.
-
Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
LSE™ 71L Shaking Incubators
CorningThis high performance shaking incubator has a full size glass door and internal light that allows easy viewing of samples without disturbing the chamber contents. Mechanical convection provides a safe, stable temperature environment and fast chamber temperature recovery after opening the door. The…
-
Axygen® disposable reservoirs are designed to accommodate all multichannel pipettor. Four corners and sharp V-bottom shape ensures maximum sample retrieval. Certified RNase-/DNase-free Nonpyrogenic Sterile
-
Corning Falcon® Multiwell Plates For Cell Culture provide a consistent culture surface chemistry by using a vacuum gas-plasma treatment Cylindrical, flat-bottom plates Alphanumeric well identification Gamma irradiation sterilized Crystal-grade polystyrene Non-pyrogenic …
-
Axygen® deep well and assay plates are used for sample collection, in vitro growth chambers and long-term storage. Made of polypropylene, they offer excellent chemical resistance and will withstand temperatures down to -80°C. Features 5.0mL deep well plate with rectangular…
-
96 Well Cell Culture Clusters
CorningCompatible with most automatic dilutors, pipettors and centrifuges, plate readers and washers Alphanumeric markings aid in well identification Stacking beads and uniform footprints for easier handling Uniform footprint Costar ® 96 WellCell Culture Clusters are treated…
-
The Corning portfolio of cytokines, growth factors, and media supplementation offers a wide array of proteins that result in proliferation or differentiation of the affected cells. Vialed, highly purified growth factors with high biological activity Broad range of highly purified natural and…
-
PC-400D & PC-600D Hot Plates
CorningConserves energy Hot top indicator for safety Two-year warranty Corning® hot plates have a glass-ceramic Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Advanced insulation technology conserves energy by keeping heat safely at the top where…
-
Tip format: 96 tip and 384 tip Tip volume range: 20 μL to 235 μL Tip material: Clear or black polypropylene, RNase-/DNase-/human gDNA-free, Nonpyrogenic Available options: With or without…
-
15mm Netwell™ Inserts
CorningThese 15mm diameter Netwell inserts have polyester mesh bottoms attached to polystyrene inserts They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining…
-
Plastic Syringe Filters
CorningFREE SAMPLES! Download the form in the Additional Info tab to request yours. Corning® syringe filters are 100% integrity tested and are certified non-pyrogenic and non-cytotoxic and are manufactured in accordance with ISO 9002 standards. A variety of membranes are available to meet…
-
PYREX® VISTA Test Tubes
CorningBeaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 14/20 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. This funnel is also a replacement for organic chemistry kit No. 6949K (0318V10). The…
