Kemtech America Lab Glassware
-
Synthware Vacuum Adapters with 1:5 Teflon® Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The PTFE stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Rotary Evaporator Anti-Splash Traps, Modified
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer and lower inner standard taper joints.
-
SYNTHWARE Thermometer Adapter with Hose Connection
Kemtech AmericaThermometer Adapter, Vacuum, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.
-
Peptide Synthesis Vessel, Solid Phase, Synthware, Capacity: 10-100mL available, Frit Porosity: Coarse or Medium available, Frit Diameter: 15-40mm Available, GL Thread: 14 or 25, Arm OD: 8mm, Supplied with a PTFE lined cap and T-bore PTFE stopcock with 2mm bore.
-
Synthware Reducing Adapters
Kemtech AmericaSynthware reducing adapters are used for connecting dissimilar standard taper joint sizes. The lower inner joint is larger in size than the top outer joint.
-
Synthware Tapered Distilling Adapters
Kemtech AmericaWith an outer standard taper joint at the top. The tapered delivery drip tube extends into open receivers.
-
Synthware Vacuum/Inert Gas Adapters with Glass Stopcocks
Kemtech AmericaSynthware vacuum or inert gas adapter has a T-bore glass stopcock allowing vessels with a standard taper outer joint to purged and evacuated. The stopcock has a constant pressure retention device and a 4 mm bore.
-
SYNTHWARE Distillation Adapter
Kemtech AmericaDistillation Adapter, Microscale, Synthware, Joints: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Glass Check Valves
Kemtech AmericaCheck Valve, All Glass, Synthware, Hose Connections OD: 8mm, with ground seat for liquid seal.
-
Synthware Vacuum Adapters with Glass Stopcocks, Straight
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Distilling Adapters, 105°
Kemtech AmericaSynthware distillation adapter with sealed in drip tip. Adapter is bent at 105 degrees. Standard taper top outer joint and lower inner joints.
-
Synthware Connecting Adapters
Kemtech AmericaSynthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.
-
SYNTHWARE Solvent Still Head, High Vacuum Valves
Kemtech AmericaSolvent Still Head, High Vacuum Valves Capacity: 250mL Joints: 24/40 Valve Size: 0-4mm
-
Synthware Distillation Connecting Adapters
Kemtech AmericaSynthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.
-
SYNTHWARE Jacketed Micro Vigreux Distillation Head
Kemtech AmericaDistillation Head, Vigreux, Jacketed Thermometer Joint: 10/18 Joints: 14/20, use with 25mm immersion thermometer
-
SYNTHWARE Vacuum Takeoff Adapter
Kemtech AmericaVacuum Takeoff Adapter, Microscale, Synthware, Joint: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE PTFE Joint Sleeves
Kemtech AmericaJoint Sleeve, PTFE, Ribbed with gripping ring, Synthware, Sizes available to fit various joint sizes.
-
SYNTHWARE Solvent Still Head, Repurification
Kemtech AmericaSolvent Still Head, Repurification Joint: 24/40
-
SYNTHWARE Hickman Still Head
Kemtech AmericaHickman Still Head, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Short Path Vacuum Jacketed Distillation Apparatus
Kemtech AmericaVacuum jacketed design for more efficiency. When a thermometer is inserted in the top of this apparatus, the bulb and stem serve as column packing. The close coupled condenser and vacuum connection offer and extremely short condensate travel path. Used with 25mm immersion thermometer, and D27…
-
Synthware Vacuum/Inert Gas Adapters, 90°
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper inner joint.
-
Synthware Chemistry Vacuum Distilling Adapters
Kemtech AmericaWith two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is 100mm.
-
Mineral Oil Bubbler Oil Adapters
Kemtech AmericaSynthware adapter with oil bubbler. With standard taper inner joint. Horizontal design allows for in line connection for apparatus purging.
-
SYNTHWARE Distillation Receivers
Kemtech AmericaWith the outer and inner joint at 135° angle, used with short-path.
-
SYNTHWARE Dean Stark Distillation Receivers
Kemtech AmericaFor easy separation of water from reaction or distillation system.
-
SYNTHWARE Hickman-Hinkle Still Head with Side Port
Kemtech AmericaHickman-Hinkle Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
-
SYNTHWARE Claisen Adapter
Kemtech AmericaClaisen Adapter, Microscale, Synthware, Joints: 14/10, supplied with two compression caps, two Viton O-rings and two PTFE-faced silicone septum.
-
SYNTHWARE Snyder Distillation Column
Kemtech AmericaSnyder Distillation Column, 3 Section Top Outer Joint: 24/40 Lower Inner Joint: 24/40 Column Height: 150mm Overall Height: 300mm For use with Kuderna-Danish flask.
-
SYNTHWARE Distillation Receiving Set
Kemtech AmericaComes with Synthware Distilling Adapter (Joints: 14/20, 19/22 AND 24/40) and Cow Receivers (Joints: 14/20, 19/22, AND 24/40). Rotating cow receiver allows four flasks to be progressively filled. **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
SYNTHWARE T-Shaped Connecting Tubes
Kemtech AmericaConnecting Tube, T-shaped, Synthware, Tubing OD: 8 and 10mm available.
-
Synthware Vacuum Filtration Adapters
Kemtech AmericaUsed with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.