Kemtech America Glass Joints & Adapters
-
Synthware Distillation Adapters
Kemtech AmericaSynthware distillation adapter with a 10/18 standard taper outer joint for a 76mm immersion thermometer. The adapter has a standard taper top outer joint and inner joints for the bottom and side.
-
-
Synthware Flow Control Adapters with Metering Stopcock, Straight
Kemtech AmericaSynthware flow control adapter with metering stopcock. Adapter has a 2mm PTFE metering stopcock between top outer and lower inner standard taper joints. Permits flow control of fluids between apparatus.
-
SYNTHWARE Thermometer Adapter with Hose Connection
Kemtech AmericaThermometer Adapter, Vacuum, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.
-
Synthware Distillation Connecting Adapters
Kemtech AmericaSynthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.
-
Synthware Distillation Adapters with Threaded Thermometer Ports
Kemtech AmericaSynthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size.
-
Synthware Vacuum Adapters with Glass Stopcocks, Straight
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
-
SYNTHWARE Glass Check Valves
Kemtech AmericaCheck Valve, All Glass, Synthware, Hose Connections OD: 8mm, with ground seat for liquid seal.
-
Synthware Distillation Adapters, Vacuum Jacketed
Kemtech AmericaCan be used as a distilling head to connect a condenser to the top of the distillation column. The 10/18 top joint accomadates a 76mm immersion thermometer.
-
Synthware Distilling Adapters, 75°
Kemtech AmericaSynthware distilling adapter with top compression cap. With same size standard taper inner joints on bottom and side arm. Cap accomodates 5.0 - 7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton o-ring.
-
Synthware Reducing Adapters
Kemtech AmericaSynthware reducing adapters are used for connecting dissimilar standard taper joint sizes. The lower inner joint is larger in size than the top outer joint.
-
SYNTHWARE Solvent Still Head, Repurification
Kemtech AmericaSolvent Still Head, Repurification Joint: 24/40
-
Synthware Vacuum Filtration Adapters
Kemtech AmericaUsed with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.
-
SYNTHWARE Gas Inlet/Outlet Adapter
Kemtech AmericaGas Inlet/Outlet Adapter, Microscale, Synthware, Joint: 14/10, Hose Connection OD: 8mm.
-
Synthware Vacuum Adapters with Outer Joints & Glass Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper outer joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
SYNTHWARE Short Path Distilling Head with 24/40 Joint
Kemtech AmericaOne-piece design for easy set-up. For the best result, use D272440 distillation receiver. To be used with 25mm immersion thermometer.
-
SYNTHWARE Solvent Still Head, High Vacuum Valves
Kemtech AmericaSolvent Still Head, High Vacuum Valves Capacity: 250mL Joints: 24/40 Valve Size: 0-4mm
-
SYNTHWARE Hickman Still Head
Kemtech AmericaHickman Still Head, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Synthware Long Stem Inlet Adapters
Kemtech AmericaSynthware long stem inlet adapter. With standard taper top outer joint and lower inner joint with sealed in lower tube extending below the inner joint.
-
SYNTHWARE Hickman Still Head, with Side Port
Kemtech AmericaHickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Distillation Adapter
Kemtech AmericaDistillation Adapter, Microscale, Synthware, Joints: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Synthware Inert Gas Adapters with 2 Hose Connections
Kemtech AmericaSynthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.
-
Synthware Thermometer Adapters
Kemtech AmericaSynthware thermometer adapter with a 5 degree offset and a serrated hose connection for vacuum. Joints are standard taper.
-
SYNTHWARE Micro Vigreux Distillation Head
Kemtech AmericaDistillation head with condenser sealed to a Vigreux column. Vacuum adapter has an outer joint and accepts a distribution adapter (D201414). To be used with a 25mm immersion thermometer.
-
Synthware Connecting Adapters
Kemtech AmericaSynthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.
-
Synthware Flow Control Adapters with Metering Stopcock, 90°
Kemtech AmericaSynthware flow control adapter with metering stopcock. The serrated hose connection is turned 90 degrees to the standard taper inner joint. Provides on/off control with the main stopcock and precise control of liquids or gasses with the needle valve.
-
SYNTHWARE Vacuum Jacketed Distilling Heads
Kemtech AmericaDistilling Head, Vacuum Jacketed Thermometer Joint: 10/18 Joints: 14/20 or 19/22 available For use with 25mm immersion thermometer.
-
SYNTHWARE Kugelrohr Distilling Bulbs
Kemtech AmericaKugelrohr Distilling Bulb Capacity: 5, 10, 15, 25 or 50mL available Joints: 14/20, Bulb O.D.: 25, 31, 35, 42 or 48mm available Overall Height: 80, 85, 90, 98 or 105mm available Used in distillation of very small amount of distillate at lower temperature with high efficiency.
-
Synthware Rotary Evaporator Anti-Splash Traps, Modified
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer and lower inner standard taper joints.
-
Synthware Vacuum Take-Off Adapters with Glass Stopcocks
Kemtech AmericaSynthware vacuum adapter with 2mm straight bore glass stopcock on the hose connection.The upper outer and lower inner standard taper joints are the same size.
-
Synthware Claisen Adapters, Modified
Kemtech AmericaIt is modified with an additional side arm at 45 degrees to the vertical outer joint. All joints are the same size.