Synthware

Distillation Adapter, Microscale, Synthware, Joints: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

Organic Chemistry Kit, Synthware, Joint Size: 14/20.

Straight Removable Hose Connection and Nylon Caps in either 9.5mm or 11mm. Synthware, Sizes: 14 and 18.

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the…

High Vacuum Valve, 90 Degree, Synthware, Size: 0-4mm, Side Arm OD: 9mm.

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Distance between stopcocks is 75mm center to center.

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully…

Addition Funnel, Pressure Equalizing, PTFE Stopcock, Synthware, Capacity: 10-1000mL available, Top Joint (Outer): 14/20, 24/40, and 19/22 available, Bottom Joint (Inner): 14/20, 24/40, and 19/22 available. Stopcock Bore: 2mm or 4mm available

Vacuum Trap, Two Piece Design Body Flange: 57mm O-ring Joint Size: #15 Outer Body OD: 50mm Outer Body Length: 300mm below flange supplied with flange O-ring and horseshoe clamp.

Sublimation Apparatus, Synthware, Capacity: 100 or 150mL available, Flange Size: 57 or 80mm available, supplied complete with condenser, flask, O-ring and horseshoe clamp.

Sublimator, Two Piece, Synthware, Various sizes are available. O-Ring Size: 217, 226, or 229, Clamp Size: 35, 65, or 75 available.

With small ball joints to prevent mineral oil being sucked back under sudden negative pressure in the system.

One rounded angled end and one square end. Available in various lengths.

Comes with Synthware Distilling Adapter (Joints: 14/20, 19/22 AND 24/40) and Cow Receivers (Joints: 14/20, 19/22, AND 24/40). Rotating cow receiver allows four flasks to be progressively filled. **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

Comes with Synthware Distilling Adapter (Joints: 14/20 or 19/22) and Cow Receivers (Joints: 14/20 or 19/22). Designed without hose connection to be used with D10 distillation apparatus. **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

Funnel, Microscale, Synthware, Top OD: 27mm.

Clamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.

Thermometer Clamp, Synthware, Extension Rod Diameter: 10mm, Overall length: 200mm.

Spin Vane, Synthware, for 3.0 and 5.0 conical bottom mini vials, Magnet is encassed in PTFE.

Vigreux Distilling Column, Microscale, Synthware, Joint: 14/10, Overall Length: 122mm, Length Indented Section: 75mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Air Reflux Condensor,Microscale, Synthware, Joint: 14/10, Effective Length: 100mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Coil Reflux Condensor, Microscale, Synthware, Joint: 14/10, for low boiling solvents, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Connecting Tube, Y-shaped, Synthware, Tubing OD: 8mm.

Friedrichs Condenser, Joint: 24/40, Overall Height: 330mm, Hose Connection: 10mm

Drying samples for elemental analysis. Sample is placed in a vial which is placed into drying chamber. Under vacuum and gentle heat created by refluxing in outer jacket of low boiling point solvents.

Designed for microscale application. With one female joint and four drip-tip male joints.

Short-path design for microscale application, used with 25mm immersion thermometer, and D27 distillation receiver.

With 2mm glass stopcock and 24/40 joint. Supplied with a special 25mL long-neck flask for small volume efficiency.

For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately.

It is a particle type mini-glass coils packing and can be "poured" into any laboratory or pilot scale column. Easily removed for replacement or cleaning.

Dessicant Flask, Joint: 34/45, with 2mm bore PTFE stopcock.