BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

Jenway offer an extensive range of cuvettes for measuring liquid samples. The cuvette required will depend on the wavelength range required and the sample volume available. Glass cuvettes are only suitable for the visible region, whereas quartz may be used in both the UV and visible region. A 10mm…

Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

supplied with 1 PTFE stopper, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Rectangular fluorescence cell, quartz, anaerobic, 10 mm pathlength, 3.5mL, 1/pk. Includes inlet tubing and a reservoir (1.5mL) joined to the cell using a ground glass joint, for collecting excess gas produced by anaerobic experiments. Evacuation tube is 4 mm ID, 6 mm OD and 30 mm long. Compatible…

Our electroporation cuvettes are designed for use with bacterial, yeast, fungi, and mammalian cells. Product Details: Manufactured from high quality polycarbonate material Precision build Polished aluminum plates reduce static and arcing Compatible with most Electroporation…

Disposable Methacrylate Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side Standard 10 mm Light Path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The methacrylate…

Designed for the measurement of very small samples Retain exterior dimensions of standard cells Volume range: 10 µL to 160 µL Path length: 10 mm The entrance to the sample compartment is hemispherical to eliminate sharp corners which can cause sample loss due to…

10 mm diameter with 0.60 mm wall thickness ASTM type I Borosilicate glass Concentricity and camber tolerances are strictly maintained for superior performance. Shimming that may have been required with other manufacturers' tubes may no longer be necessary. All tubes are supplied with end…

The Agilent Technologies short extension lead has an easy-to-use and durable design and is perfect for mounting the probe outside the sample compartment. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

CAS Number: 67-66-3 UN Number: UN1888 Solubility: 8 g/l (20°C) Melting Point: -63°C Molar Mass: 119.38 g/mol Boiling Point: 61°C (1013 hPa) Vapor Pressure: 211 hPa (20°C) Refractive Index: 1.45 Density: 1.48 g/cm3 (20°C)

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Eppendorf µCuvette G1.0 microvolume measuring cell is a high-quality cuvette made of aluminum and quartz glass. It is the perfect tool for measuring high concentrations in small volumes. Higher sample concentrations require a shorter optical path length for measurements. With an optical…

The Specac omni-cell spacer is designed to use inside a sealed cell to permanently attach to the demountable windows.

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

CAS Number: 1002-84-2 Solubility: (20°C) insoluble Melting Point: 51 - 53°C Molar Mass: 242.4 g/mol Boiling Point: 257°C (133 hPa) Flash Point: 110°C

Optical filters and filter kits for Agilent UV-Vis spectrophotometers. Kits include holmium oxide/didymium glass filters (uncertified) for confirming wavelength accuracy, neutral density filters for testing photometric linearity and attenuator filter kits for attenuating high absorbance at visible…

The Agilent Technologies cable vankel accessories kit is suitable for use with Cary UV systems. Application: For Cary UV Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Matched pair, open top with PTFE lid supplied, Suits all Agilent UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

CAS Number: 140-11-4 Solubility: (20°C) slightly soluble Melting Point: -51°C Molar Mass: 150.17 g/mol Boiling Point: 205 - 207°C Vapor Pressure: 1 hPa (45°C) Flash Point: 95°C Refractive Index: 1.5006 (20°C, 589 nm) Explosion Limit: 0.9 - 8.4 %(V) …

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

material   KBr size:   41 mm × 23 mm , rectangular

Fiber optic probes enable fast accurate measurements, improving your workflow and productivity, and eliminating the need for expensive cuvettes. Agilent offers a comprehensive range of fiber optic measurement probes, couplers, shields and tips for Versa/Dip probes used with Cary UV-Vis systems. …

Precision 5 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. A complete selection of tubes for all types of…

Ultra-Violet photo-oxidation unit for the liberation of inorganic phosphate from organically-bound phosphorous compounds, oxidation of carbon in organic matter and oxidation of organic nitrogen compounds. Cylindrical lamp housing contains 12, 100ml quartz sample tubes that surround a 1200w medium…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.