Tubing, peristaltic pump kit for the Cary Routine Sampler Accessory. Includes silicon pump tubing and fittings. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies neutral density filter kit is suitable for the purpose of minimizing the amount of light from entering the glass lens thus nullifying the effects of density. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Replaceable probe tip, Torlon, 40mm pathlength. 7.9 mm diameter. Suitable for use with the Torlon probe body (p/n 7910032600) or the Torlon fiber optic dip probe with the replaceable tip (p/n 7910035100). The tip is suitable for operation in temperatures up to 200 °C. Application: For Use With the…

Agilent offers a range of cell holders, providing you with the ability to analyze a wide variety of samples. Standard, cylindrical, long pathlength, and variable pathlength cell holders, bases and test tube holders are all available for Agilent UV-Vis and UV-Vis-NIR systems. Application: For…

The Agilent Technologies holmium oxide/didymium glass filter kit is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be…

Quartz, 2 filling ports, supplied with 2 PTFE stoppers, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Agilent UV-Visible calibration standards and kits provide an inexpensive and time-saving solution for calibrating and qualifying your UV-Vis instrumentation. The reference material kits were developed for analysts who need to conform closely to both quality and regulatory requirements when…

Magnetic stir bars or star type stirrers provide uniform and thorough mixing of samples in cuvettes. The stir bars are recommended for the stirring module and Peltier thermostatted (1 x 1) cell holder. The star stirrer is recommended for Peltier thermostatted multicell holders for Cary UV-Vis…

Replaceable probe tip, Torlon, 20mm pathlength. 7.9 mm diameter. Suitable for use with the Torlon probe body (p/n 7910032600) or the Torlon fiber optic dip probe with the replaceable tip (p/n 7910035100). The tip is suitable for operation in temperatures up to 200 °C. Application: For Use With the…

Quartz, 2 filling ports, supplied with 2 PTFE stoppers, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

The Agilent Technologies long rectangular cell holder comes with cell lifter and cell height adjustment screws. This cell holder is compatible to use with Cary spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Low head space thermal melt cell, quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and…

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a…

The Agilent Technologies deuterium UV lamp is mainly used in the process of spectroscopy to maintain a continuous spectrum throughout. The low-pressure gas-discharge design ensures durability. This product is only available to U.S. Domestic Customers. For research use only, not to be used…

The Agilent Technologies temperature probe holder is suitable for use in 10 mm standard rectangular cuvettes. Application: For Use in Standard 10 mm Rectangular Cuvettes This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies short extension lead has an easy-to-use and durable design and is perfect for mounting the probe outside the sample compartment. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies certified diffuse reflectance wavelength and wavenumber standard is suitable for use in spectrometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S.…

The Agilent Technologies holmium oxide filter is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies UV-Vis reflectance probe holder helps to hold fiber optic reflectance probe vertically in all Cary instruments. Application: For all Cary, to Hold Fiber Optic Reflectance Probe Vertically This product is only available to U.S. Domestic Customers. For research use…

The Agilent Technologies neutral density screen is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling. …

The Agilent Technologies temperature probe holder is suitable for use in rectangular micro-cells. Application: For Use in Rectangular Micro-Cells This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Matched pair, stoppered with PTFE stopper supplied, base thickness 12mm, self-masking black walls, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not…