Square Cuvettes

Polyethylene Fits most standard 10 mm cuvettes Flexible fins on 8495V27 caps allow tight fit with 10 mm cuvettes from most other manufacturers.

Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

…Micro Fluorometer cells has been specifically designed by Starna for use with the FCA range of adaptors listed below. The adaptor locates the square cross section cell accurately in the center of the instrument cell compartment. Therefore, for a given path length, the cell is optimized for minimum…

6320D Visible Spectrophotometer supplied with power cord, pack of 100 disposable cuvettes, dual cell holder (for 10mm square cuvettes and 12.7mm diameter tubes), interface cable and PC application software on CD-ROM, 230V/50Hz.

…Pop® Dispenser with tests for Chlorine Compact and convenient Redesigned dispenser prevents clogging Dispense into round or square cuvettes Push button operation for precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for free or total…

…printer or computer. Sample compartment accepts 5 mm to 100 mm pathlength cuvettes and various accessories. Both models include a four-position 10 mm square cuvette holder, one set of four matched optical glass 10 mm square cuvettes, an RS-232C interface, an operator’s manual and a dust cover.…

…beverage labs, water and wastewater labs and other fields of quality control. Both models include 10 mm test tube cuvettes (Bx. 12), a 10 mm test tube adapter, a 10 mm square cuvette adapter, an operator’s manual and a dust cover. Model 8406A11 also has an RS-232C interface for connecting unit…

…(PE) and holds 12 cuvettes in place for preparation work, storage and protection from tipping over. When in storage, the racks are stackable. Dimensions: 170mm x 50mm x 15mm. The caps are produced from low density polyethylene (LDPE) and easily snap into the square cuvettes to provide a complete…

Stir and Add™ Cuvetter Mixer Of clear acrylic plastic Used to add enzymes and other materials to solution in spectrophotometer cells 8498D06 Cell Mixer has plunger for square 10 mm light path cells; length 105 mm 8498D11 Cell Mixer has narrower plunger for semi-micro cells…

…dynamic range and large storage capacity, all within a compact instrument. Features: Accepts 10 -15mm round vials & 10mm square cuvettes Fast reading time with optional integration phase Versatile protocol selection including single/dual point, peak detect and kinetic data…

Square Cell Adapter Adapts 8420Q18 test tube holder to take square cuvettes with 10 mm light path. Test Tube Holder As supplied with all models of the SPECTRONIC 20 and 20D spectrophotometers. Takes 1/2" diameter test tubes or 10-mm round cuvettes; ability to accommodate hatch COD vials. …

…printer on certain GENESYS models, cuvettes, replacement lamps and pump tubing. Contact your Thomas Scientific representative for specific questions. 335916-000 (Thomas 0880A48) 10mm Single Cell Holder with Baseplate Holds one 10 mm path square cuvette 840-202100 (Thomas…

… Large, bright, color LCD adjusts to the perfect angle for any technician to view Standard sample compartment accommodates both 10mm square cuvettes and test tubes up to 25mm (1 inch) diameter Room light immune optical system lets you measure tall test tubes with the lid open Analyzer…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

For use with Thermo Scientific Spectronic 20+ and 20D+ Spectrophotometers. Set of 2 Square Cuvets Lightpath: 10mm L [METRIC]: 10mm

…2000 series spectrophotometers feature auto-zeroing, automatic four cuvette holder factor mode, RS-232 interface selectable power source (110 V/60 Hz) and are available with a built-in printer. Both models include square 10 mm cuvettes (4), four cell holder, dust cover and instructions. Self…

…Meander Fusion Chamber, Flat Electrode, Adapters, Connection Cable, Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm, (10 each) and Cuvette Rack. BTX ECM 2001+ EMBRYO MANIPULATION SYSTEM. Suitable for cell fusion and square wave mammalian electroporation applications. Includes ECM 2001+ Generator,…

…such as thermal denaturalization of DNA Small jacket volume minimizes undesirable heating of phototube Fits standard carriers for 10 mm square cells One-piece construction Sample well, sealed between two optical faces, is 4 mm wide. Circulating liquid enters jacket at top of…

…Safety Dome, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each), and Cuvette Rack 660. BTX GEMINI X2 HIGH THROUGHPUT SYSTEM WITH HT-200. Square and exponential decay wave electroporation of all cell types, up to 96 samples at once. Includes Gemini X2 Generator, Safety Dome, Cuvettes 1mm, 2mm, 4mm…

…square wave mammalian electroporation system incorporates automatic bipolar switching into transfection protocols. System comes with Generator, Pulse Switcher, Safety Dome, cuvettes, and Cuvette Rack. BTX ECM 830 Safety Dome System System Contains ECM 830 Generator, Safety Dome, Cuvettes 1 mm,…

…160 Spectrophotometers. The accessory fits inside the sample compartment of the instrument. Includes cell holder for 10 mm pathlength square cells Temperature range 20° C to 60° C Fully controlled by the instrument on-board software or Thermo Scientific™ VISIONlite™…

…Standard sample compartment lid User installable with basic tools 1182H30 10mm Square Cell Holder for GENESYS 30 Replaces the standard cell holder shipped with the instrument Cuvette holder can be removed and replaced with specialty cell holders used with earlier GENESYS…