Glass Cuvettes For Spectrophotometer

Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…

Disposable Cuvettes for use to hold samples during testing

…as 20% of that for standard cells of the same path length. Required volume of the Semi-Micro cells (8491S04, T21, T22, S51 and S52) of 0.9 mL can be reduced by elevating the cell so long as the light beam does not strike the walls of the cell. If beam width of spectrophotometer approaches 4 mm,…

…extensive range of cuvettes for measuring liquid samples. The cuvette required will depend on the wavelength range required and the sample volume available. Glass cuvettes are only suitable for the visible region, whereas quartz may be used in both the UV and visible region. A 10mm cuvette typically…

…accessories for specialized sample handling is available for the GENESYS 10S spectrophotometers. Choose cell holders for vials or long path cells, add a sipper kit to eliminate handling of cuvettes, or thermostat your sample with circulating water or an air-cooled Peltier accessory for specialized…

…filling. May require modification of standard cell carrier to accommodate short cells. Self-masking type has black walls and bottom plate to absorb all direct and scattered light, and for improved sensitivity. Also recommended for use with spectrophotometers having band widths approaching 40 mm

Cuvette Standard O Optical Glass 10 mm Reusable Glass Cuvettes. The Standard O macro cuvette with an optical path length of 10 millimeters is made of fritted optical glass and comes in a matching pair. For measurements in the visible range with a wavelength between 320 nm – 2500 nm. …

Reliable, Reusable Glass Cuvettes. The Standard Q macro cuvette with an optical path length of 10 millimeters is made of fused quartz glass and comes in a matching pair. For measurements in the ultraviolet and visible range with a wavelength between 200 nm – 2500 nm. Accuracy by…

Sample cuvette for Abbott TDx™, 12 mm X 50 mm, borosilicate glass, natural color

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

For use with Thermo Scientific Spectronic 20+ and 20D+ Spectrophotometers. Set of 2 Square Cuvets Lightpath: 10mm L [METRIC]: 10mm

…gentle on delicate glass or quartz cuvettes, this all-plastic washer replaces costly, antiquated devices that are often more fragile than the cuvettes they wash. Comes complete with a 500 cc polypropylene vacuum flask, Vikem(R) vinly stopper, and 3' of PVC tubing ready for connection to a vacuum…

…mm square cuvette holder, one set of four matched optical glass 10 mm square cuvettes, an RS-232C interface, an operator’s manual and a dust cover. The 2100 is a VIS model and the UV-2100 is a UV/VIS model. NOTE: the UV-2100 is also available with an analog wavelength selector, call for…

…to take square cuvettes with 10 mm light path. Test Tube Holder As supplied with all models of the SPECTRONIC 20 and 20D spectrophotometers. Takes 1/2" diameter test tubes or 10-mm round cuvettes; ability to accommodate hatch COD vials. Test Tube Adapter, 3/4" For one 8420R45 test…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Jacketed for heating or cooling samples by liquid heat transfer media Ideal for study of heat effects, such as thermal denaturalization of DNA Small jacket volume minimizes undesirable heating of phototube Fits standard carriers for 10 mm square cells One-piece construction …

…window in a self-masking configuration. Sample chamber (W x L x H): 4 x 10 x 11 mm. The external dimensions for Thomas No. 8495L11 are 12.5 x 12.5 x 45 mm. The external dimensions for Thomas No. 8495L13 are 12.5 x 12.5 x 35 mm. Design features an internally threaded jacket which will accept M6…

…cuvettes. Once set in the parameters, the software automatically utilizes the right light path length when calculating concentrations. A defined angle for opening and closing the cuvette allows for easy and reproducible handling. Furthermore, the hydrophobic surface coating on the quartz glass…

The W100 Optical Glass are standard spectrophotometer cells. 12.5mm x 40mm, for use from 340nm to 2500nm (visual and near to medium infra red). These cells are for use in a standard sized spectrophotometer, but can be used in PFX instruments when the 12.5mm cell is needed.

…to a minimum, 15 to 20% greater than the sample chamber volume. The sample compartment optimizes the alignment of the sample for maximum sensitivity in the spectrophotometer. The sample is inserted and retrieved with a pipet. The cells have two polished windows and are supplied with a tight-sealing…

…enables researchers to determine nucleic acid and/or protein concentrations in a 96 well format. This eliminates the need for expensive quartz cuvettes and allows for higher throughput at a lower cost. The UV-Plate is compatible with the Bio-Tek PowerWave™ 200, the Bio-Tek µQuant™,…

…and micro cells are for use with spectrophotometers having a beam height of 15 mm. For applications with a wave length range of interest in the visible range use our low cost Agilent optical quality glass cells, made from exceptionally pure raw materials. Quartz glass gives transmission values…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps OD 3.0124 (+0.00/-0.013) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

…100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 4.97 (+0.0000/-0.013) mm ID 4.20 (+0.013/-0.0000) mm Wall thickness 0.375 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…

…100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 4.97 (+0.0000/-0.013) mm ID 4.20 (+0.013/-0.0000) mm Wall thickness 0.375 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…

100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming…