These support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.

The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of…

Strong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

This line of 3-prong extenstion clamps are constructed of pressure die casted zinc alloy and are chrome plated. Clamps open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Available with an extension rod 8.25"…

Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

Hook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".

Screw Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.

Steel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels.

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

Clamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.

The A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.

This Lattice Lab System features an assortment of aluminum rods frup to 72" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

Mohr's Pinchcock tubing Clamp is made of steel wire and nickel plated. Available for tubing diameters of 10mm, 13mm, and 16mm.

Molded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.

Cast iron bases with gray enamel finish. The base is 3mm thick with a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the…

These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

Excellent for holding small objects, The jaws on these burette clamps open from 15mm to 45mm (0.5" to 1.75"). The clamp attaches to rods up to 13mm (0.5"). O.D. Jaws can be rotated and locked at any angle. Available with the jaws coated or uncoated.

This deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.

Clamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.

This apparatus is useful for holding objects that are too large for standard clamps, such as glass distillation columns and odd shaped glassware. Chain and support band are made of strong chrome-plated brass, and support rod is constructed of stainless steel. Chain is 21” long and can be adjusted…

Support rings with clamp, cast iron.

Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

Tall form clear quartz glass crucibles are ideal for applications that require ashing of samples. Quartz material offers low expansion, dimensional stability, and thermal shock resistance. Can withstand a continuous operating temperature of 1050°C (1922°F). Lids are also manufactured from quartz…

This flexible arm is extremely versatile and can be placed in virtually any position or angle. Includes a 3-Prong Clamp Head, nickel-plated flex arm in 305 mm (12") length. The Lab-Frame Connector securely attaches to support stands, lab-frames; or any support rod up to 19 mm (0.75") diameter.

Chrome plated steel double clamp. Accepts rods up to 0.75" (19mm) in diameter. One clamp can be rotated 360° about long axis and clamped in any position.

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.

This sinc plated stamped steel burette clamp has a steel thumbscrew and can be used with rods up to 3/4" in diameter. The distance between the two burettes is 7.25"

These clamps are molded in polypropylene, making them completely corrosion proof. The spring loaded jack in the middle provides a vice-like grip to the burette and prevents in from slipping. Two tapered wedges are provided to ensure firm grip on the rods having diameter 0.5" or3/8".…