Durable stainless steel construction PVC coated jaws Comes with boss head for convenience and versatility in lab setups Thumbscrew allows for easy and secure fitting Overall length in 9.5" Universal 3 pronged clamp with chemical resistant PVC coated jaws. 9.5" Total length with a convenient…

Clamp Universal, Cork lined Durable, premium stainless steel construction convenient tommy bar style thumbscrew for easy and secure tightening 100mm jaw capacity Cork lined jaws provide a stable hold 11" total clamp length High quality, durable 3 prong clamp with…

3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glassware Accommodates objects up to 2.5" Adjustable thumb screws on both sides allows for a wider range of accommodation Non-slip vinyl coated rubber prongs…

Clamp features a solid zinc die cast construction and a high grade, nontoxic, powder coating - non-ferrous, rust free & long lasting use for any laboratory application Attached 19" chain for wrapping around the circumference of large labware Vinyl coated jaws provide a strong, slip-free hold …

Clamp Retort, 3 Prong, Powder coated 3 Prong, Powder coated clamp Over all Length 10" Prongs have 2" of PVC coating. Clamping tommy-bar screw through swivels, Clamping tommy-bar screw through swivels, mounted on 5.625" rod. Rod dia. 8 mm (0.315") Jaw…

PVC LINED JAWS Features PVC-dipped steel jaws for firm, no-slip grip on delicate labware WIDE OPENING Screw adjustable jaws accommodate items measuring from 15mm to 45mm (06"-1.75") ADJUSTABLE ANGLE & LENGTH Threaded rod and wing nut adjusts clamp angle over 360 degree range, and overall…

Boss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 90mm in width Cork lined jaws Perfect for test tubes, burettes, or flasks EISCO Clamp Retort, 4 Prong, Cork Lined with Boss Head (1) Clamp Four prong, die casted alloy clamp retort with cork lined jaws with…

EISCO Thermometer Clamp (with Boss Head) (1) Thermometer Clamp This thermometer clamp has adjustable 360° jaw rotation. Accepts rods up to 16mm in diameter and thermometers 6 to 12mm in diameter. The clamp is die casted and the thermometer jaws are made of phosphor-bronze. Overall length is 140mm.

Made from high grade Zinc Alloy, finished in a non-toxic powder coating. Two wide pad metal screws make it easier to securely fasten the bosshead to the support apparatus and clamp. Able to hold rods up to 16 mm in diameter. Holds rods orthogonal (90 degrees) to one another. Eisco Labs proudly…

Cast Iron Closed Ring Clamp with Boss Head Boss head fitted with thumb-screw  

INDUSTRIAL QUALITY High performance, aluminum rod, suitable for use on a lathe or as part of any laboratory retort setup STABILITY Rod features solid construction for stability ROUND SHAFT Rod features unthreaded, round shaft ends GREAT FOR CLASSROOM & HOME LABORATORIES An…

INDUSTRIAL QUALITY High performance, heavy duty multi-purpose table clamp. It's versatile design allows you to secure a wide variety of laboratory apparatus and accessories. Non-ferrous, drop forged steel construction that will not bend or break under heavy loads BUILT-IN ROD OR PULLEY HOLDER …

All metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab clamp - accepts rods up to 3/4" in diameter

This scissor jack is crafted of the highest quality materials and is built to last. It has a total weight of about 1.2 lbs. (540 g) and opens to a maximum height of 6". It has a Dynamic Load of 2kg and static strength of 15kg. Also available in 6.5"x5" platform size (SSJCT20) and…

Set includes retort base, rod, support ring and 4-pronged cork-lined clamp and bosshead Upgraded design now includes a two-piece stainless steel rod that effortlessly screws together, ensuring easy setup and enabling more compact storage when not in use The 8"L x 5"W base weighs 1.75lbs,…

Able to adapt to multiple brands of rod mount skeletons Tube Inner Diameter = 12.5mm Cast Iron Heavy Base Heavy Duty Casters Tired of skeleton stands breaking? Tipping Over? Difficult to move? This is the skeleton stand for you. This heavy duty skeleton holder was designed to hold multiple…

HIGH QUALITY Rod made of high quality steel STABILITY   Provides superb stability for experiments & setups THREADED Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES The durable and sturdy construction of this set makes it an…

HIGH QUALITY Made of high quality stainless steel STABILITY Provides superb stability for experiments & setups THREADED Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES The durable and sturdy construction of this set makes it an…

Jumbo sized clamp holder Fits rods 5mm-20mm in diameter Metal thumb screws with grip allows for easy adjustment Universal Clamp Holder, Jumbo Sized - Holds Rods up 20mm in Diameter (1) Clamp This universal clamp holder, made of durable metal, holds 2 rods perpendicular to one another.…

The clamp includes a high strength alloy Boss Head for securing the clamp to a frame or other apparatus. The Boss Head will accept a rod diameter of 18 mm (approximately 11/16"). Heavy duty spring loaded clamp jaw with dual screw adjustment to fine tune any fitting. Swivel between clamp and Boss…

FITS 12.5mm RODS Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH Clamps are made of high quality metal with a silver finish EASY TO USE Tighten clamps using an Allen wrench - Avoid overtightening INCLUDED Twelve clamps only - Rods…

INDUSTRIAL QUALITY High performance, jumbo sized, swivel clamp holder made of die-casted metal. The holder allows you to tilt clamps at any angle in parallel planes HOLDS LARGE RODS Screw adjustable clamp accommodates rods of up to 21mm in diameter GREAT FOR PROFESSIONAL LABORATORIES,…

HIGH QUALITY Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a rod made of stainless steel STABILITY providing superb stability for experiments & setups TAPPED HOLE AND THREADED ROD Base features a tapped…

Ideal uses for beakers, Erlenmeyer flasks, test-tubes, boiling (Florence) flasks, burettes. For securing the clamp to a frame or other apparatus an additional holder (sold separately) will be needed. Please see recommended Boss Head list. The screw adjustment allows for precise pressure when…

Steel support plate for lab use 3.75" diameter plate 6" stem length 8mm stem diameter, 1mm plate thickness Great addition to any lab setup! This steel support plate from Eisco Labs has a 3.75" diameter with a 6" stem length for an 8.75" total length. It is a versatile and durable component of…

Durable stamped steel clamp with nearly 1" adjustable holder for a wide variety of rod sizes up to 19mm One flat jaw and one angled jaw for optimal holding of cylindrical objects Adjustable from 5.5" to 6" using centrally located tightening screw Spring loaded opening with thumbscrew opens to 2"…

DIE CAST ALLOY Die cast alloy construction is strong and corrosion-resistant WIDE JAWS 3-finger jaws on clamp open to 3.5” (90mm) wide for holding a wide range of glassware sizes and volumes PVC COATED PRONGS PVC-coated prongs provide a strong, slip-free hold that won’t scratch objects.…

Heavy Duty Bosshead, Chrome Plated, Fits Rods up to 20mm Diameter Heavy duty bosshead Die casted alloy with chrome plated  or black finish Accepts rods measuring up to 20mm in diameter Large thumb screws and grooved knobs for easy adjustments (1) Boss head This…

2 Prong Adjustable Universal Clamp with an adjustable 7.5"-8" length This clamp with boss head is ideal for use with straight sides glassware apparatus such as tubes, flask necks, and burettes Accommodates objects up to 3" and has non-slip vinyl coated rubber prongs Adjustable thumb screws on…

Ideal uses for beakers, Erlenmeyer flasks, test-tubes, boiling (Florence) flasks, burettes. For securing the clamp to a frame or other apparatus an additional holder (sold separately) will be needed. Please see recommended Boss Head list. The screw adjustment allows for precise pressure when…

Aluminum die casted, holds rods at right angle with metal head thumbscrews can take rods up to 16 mm dia.

Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter with metal thumb screw