Water Quality

Compare Tool

Select up to 3 products

HomeAll Products

Water Quality

1 - 32 of 507
Sort
View
Show

  • Free & Total Chlorine Test Strips

    Hach

    The most widely used disinfectant for drinking water, chlorine is also important for sanitizing swimming pools, cooling towers, other industrial equipment, and in the treatment of municipal wastewater. Its measurement and control are vital for both safety and economic reasons. Chlorine exists in…

  • Water Hardness Single Parameter Test Kit

    Hach

    Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trizalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. …

  • Chlorine Test Paper Strips

    LaMotte

    Strips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm

  • Chlorine (Free & Total) CHEMets® Kits

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Nitrogen, Nitrate Test Kits

    Hach

    Normally found in water and soil as ammonia (NH3), nitrate (NO3), and nitrite (NO2), nitrogen is an indispensable part of the life cycle. However, concentrations above certain levels can present problems. Thomas No. 3241S80 Utilizing the simple color…

  • BrewLab® Pro Water Analysis Kit

    LaMotte

    LaMotte introduces the new BrewLab® Pro water analysis kit. Designed with the professional brewer in mind, this kit measures 11 test factors which are important in the brewing process. Water is the most important ingredient for any brewer. The BrewLab® Pro helps you to make your best craft…

  • Ammonia Nitrogen Test Kits

    LaMotte

    Octet Comparator Method (9859C70 and C71) For determining ammonia nitrogen in water using Nessler method Octet Comparator has color standards representing 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0 and 8.0 ppm ammonia nitrogen Sufficient for 50 tests Octa-Slide Comparator Method…

  • DPD No. 1 Tablets

    Lovibond

  • Total Hardness Test Strips

    Hach

    Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trivalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. …

  • Chloride QuanTab® Test Strips

    Hach

    Chloride is found in nearly all natural waters and affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. Contains 40 tests. Easy to use, disposable, and inexpensive A great way to obtain quick,…

  • Nitrate and Nitrite Test Strips

    Hach

    Nitrogen, Nitrate/Nitrite: Excessive amounts of nitrate or nitrite in water can cause infant death, adult illness, and produce spontaneous abortion in cows. Some wells contain high levels of nitrate. When water contains high nitrate levels, nitrites often are present in low concentration. Fast,…

  • DPD Chlorine Tablets

    LaMotte

    Most Widely used DPD Chlorine Tablets for Determining Free and Combined Chlorine DPD chlorine tablets employ DPD indicator (diethyl-p- phenylenediamine) to distinguish levels of free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument…

  • Dissolved Oxygen CHEMets® Kits

    CHEMetrics

    The level of dissolved oxygen in natural waters is often a direct indication of quality, since aquatic plants produce oxygen, while microorganisms generally consume it as they feed on pollutants. At low temperatures the solubility of oxygen is increased; during summer, saturation levels can be as…

  • MQuant™ Lead Test, Test Method: colorimetric with test strips and reagent

    MilliporeSigma

    Method: colorimetric with test strips and reagent 20 - 40 - 100 - 200 - 500 mg/l Pb MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. The lead test is suitable in environmental analysis. Not only in all aqueous media but also…

  • Color of Water Sets

    Lovibond

    A method for measuring the color of potable water in terms of an easily reproducible color standard is essential to water engineers responsible for the distribution of supplies for public consumption. Color determinations are useful for detecting any irregular contamination of the supply due…

  • MEL/MPN Total Coliform and E. coli Laboratory

    Hach

    This MEL provides all the hardware to carryout the Most Probable Number (MPN) method. In additon to potable water, the MPN method is ideal for wastewater samples and nonpotable samples, because the analyst can accomodate highly turbid samples which would otherwise require filtration. MEL/MPN Total…

  • Dissolved Oxygen Test Kits

    LaMotte

    Direct Reading Titrator (9860J75 and J76) For determining dissolved oxygen in natural and treated waters Employs azide modification of Winkler method Range from 0 to 10 ppm with 0.2 ppm sensitivity Sufficient for 50 tests at 10 ppm Ideal for daily monitoring or D.O. meter checkups and…

  • 5-in-1 Water Quality Test Strips

    Hach

    5-in-1 test strips are great  for quick, on-site evaluations of water quality with reliable results on every test.  These mulit-parameter test strips test for five water quality measurements on 1 strip: Free Chlorine (0-10 mg/L) Total Chlorine (0-10 mg/L) Total Hardness (as…

  • Sensafe® Chlorine Test Strips

    Industrial Test Systems

    Sensitive, safe to use - SenSafe No reagent preparation time Easy to do, quick results These test strips are an excellent alternative to wet chemical chlorine tests. The unique indicator (TMB) is reactive only to free chlorine; therefore, no interference from monochloramines occurs.…

  • Ammonia CHEMets® Kits, Direct Nesslerization Method

    CHEMetrics

    Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…

  • 2nd Generation ATP Test Kits

    Modern Water

    Luminultra’s 2nd Generation ATP kits provide fast, complete, and accurate insight into microbiological activity. Both portable and easy to use, the test kits provide an interference-free indication of total microbial quantity within minutes of sample collection allowing you to save valuable…

  • Chlorine Micro Check Test Strips

    HF Scientific

    Detect free or total chlorine concentrations as low as 0.05ppm Test strips for field testing and quality-control procedures; provide a safe and economical alternative to reagent chlorine testing. Includes: 50 test strips are supplied in bottle labeled with instructions,…

  • Chlorine Comparator

    CHEMetrics

  • Ammonia (Nitrogen) Test Strips, 0-6.0 mg/L

    Hach

    About Nitrogen, Ammonia A product of microbiological decay of plant and animal protein. Its presence in raw surface waters usually indicates domestic or agricultural pollution. Above certain levels, it is toxic to fish. Fast, reliable, and safe test strips from Hach: Hach Test Strips are easy…

  • Ammonia TNTplus, HR

    Hach

    For determination of Ammonia Nitrogen by the Salicylate Method, using TNTplus vials. Hach Method 10205. High Range: 2 - 47 mg/L NH3-N. ?25 tests/package. Reduce Errors with Bar-coded Vials No Reagent Blank Necessary Innovative Vial and Reagent Delivery Helpful package design

  • Copper (Soluble) CHEMets Kit

    CHEMetrics

    Copper is naturally present in the earth’s crust and in seawater. Copper-containing fungicides are used to control biological growth in water supplies. The Maximum Contaminant Level Goal for copper is 1.3 mg/L in drinking water. The measurement of copper is an important means of…

  • StormWatch MS4 Water Screening Kit

    LaMotte

    The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features …

  • Hydrogen Sulfide Test Kits

    Hach

    Resulting from the anaerobic decomposition of organic matter, hydrogen sulfide is present in many water supplies. Sewage and industrial wastes are other sources of sulfide pollution. Highly toxic, this compound has a characteristic rotten egg odor, which can be detected long before harmful…

  • TB 250 Portable Turbidimeter

    Lovibond

    For measuring water turbidity (cloudiness) according to either EPA or ISO Standards Easy Calibration and Operation Auto Ranging from 0-1100 NTU Simple 5 key operation Signal Averaging for stable and accurate readings Long Battery and Bulb Life Portable for use either in the…

  • WaterSafe Lead Water Test Kit

    Industrial Test Systems

    Tests for the EPA limit of 15 ppb (μg/L) Lead in water The Lead Water Test for water quality testing is a revolutionary product designed to make testing for Lead safe, easy, and affordable. This patent pending device utilizes a lateral flow test strip, similar in technology to home…

  • Nitrogen (Total) TNTplus, LR

    Hach

    For determination of Total Nitrogen by the Persulfate Digestion method, using TNTplus vials. Hach Method 10208, Low Range: 1-16 mg/L N. 25 tests/package.

  • DPD Chlorine Liquid

    LaMotte

    All the benefits of DPD tablets in a liquid Can be used with existing LaMotte chlorine comparators or colorimeters Lower cost per test than tablets Quicker results and clearer colors than tablets DPD 1A and 1B reagents are added to a 5 or 10 mL sample to test free chlorine.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.