Tubing, SP Wilmad-LabGlass, Supplies
-
5mm O.D. Ultra-Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
10mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer
SP Wilmad-LabGlassWilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is…
-
8" FEP NMR Tube Liners
SP Wilmad-LabGlassFor NMR investigations where corrosive chemical compounds such as hydrofluoric acid, ammonium bifluoride and concentrated hydroxide solutions are present, Wilmad’s 8" FEP NMR Tube Liners fit 7" NMR tubes and provide a contamination-free environment. Round-bottom,…
-
Pyrex® NMR Capillary Tubes
SP Wilmad-LabGlassWilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field
-
COLUMN CHROM FRTD 22X300MM
SP Wilmad-LabGlassInside Height 22.0 millimeters Item Weight 1.10 pounds Length 25 millimeters Width 25 millimeters Material Borosilicate Glass
-
4mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Reaction Monitoring System
SP Wilmad-LabGlassDesigned to monitor reactions from start to finish, the Wilmad-LabGlass Reaction Monitoring System is a two-chamber borosilicate glass NMR tube that allows for in-tube mixing. The system features an inner chamber with a Teflon® tip that when secured creates a positive seal separating solutions…
-
X-Band Precision Brand EPR Quartz Tubes
SP Wilmad-LabGlassWilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…
-
5mm O.D. Thin Walled Economy NMR Tubes
SP Wilmad-LabGlassDesigned for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…
-
Disposable NMR/EPR Tube Caps
SP Wilmad-LabGlassDisposable NMR Tube Caps are manufactured from molded PVC or Polyethylene depending on the tube OD. The different colors help track samples based on various reference solvents. When using Chloroform or Acetone as reference solution, please avoid (1) direct contact between the sample and the…
-
10mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
5mm O.D. Heavy Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Rotor and Caps for Bruker® MAS Probe
SP Wilmad-LabGlassManufactured from the highest purity Zirconia, Wilmad MAS Rotors provide the ultimate solution for analysis of solid samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and…
-
Susceptibility Matched Shigemi® Tubes
SP Wilmad-LabGlassShigemi tube features a susceptbility matched bottom and plunger for each of the following solvents: CDCL3 CD3OD D2O DMSO-d6 This feature would effectively reduce the boundary gradients at the edges of the coil. Therefore, it is no longer critical to keep the general NMR sample…
-
5mm O.D. Thin Walled Quartz NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…
-
X-Band Economy Brand EPR Quartz Tubes
SP Wilmad-LabGlassWilmad X-Band Economy Brand EPR Quartz Tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination Comes with a cap
-
5mm O.D. Quick Pressure Valve (QPV) NMR Sample Tubes
SP Wilmad-LabGlassWilmad Quick Pressure Valve Sample Tubes are specially designed to simplify the work of NMR/EPR studies for catalysis, gas-liquid phase reactions, air sensitive samples and elevated temperature studies using low boiling point solvents. Due to the nature of glass, Extreme Caution should be…
-
Universal Solvent Jet NMR Tube Washer
SP Wilmad-LabGlassThe Universal Solvent Jet NMR Tube Washer can be used for any length NMR sample tube by a simple adjustment of the flexible PTFE tubing. By loosening and retightening the fitting on the assembled washer head, the PTFE tubing that extends into the sample tube is adjusted to the proper length.…
-
5mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Coaxial Inserts
SP Wilmad-LabGlassSwitch between three unique sample ratios during external referencing experiments Ideal for variable temperature experiments as materials is the same between the tubes and spacer In the complete set the insert and outer tube are fused together at the bottom. It is recommended for high field…
-
Thin Walled High Throughput NMR Tubes
SP Wilmad-LabGlassWilmad Thin Walled High Throughput NMR Tubes have an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW<250) samples up to 600 MHz. Camber and concentricity values listed are the Total Indicator Reading (TIR) Designed for routine use in most…
-
Low Pressure/Vacuum Suprasil® EPR Tubes
SP Wilmad-LabGlassWilmad’s low pressure/vacuum (LPV) Suprasil tube is ideal for anaerobic and gas-tight EPR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE…
-
Economy Single Tube Solvent Jet Washer/Cleaner
SP Wilmad-LabGlassAfter fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks…
-
NMR Tube Carrier
SP Wilmad-LabGlassTry our handy pocket NMR/EPR tube carrier; holds one 5mm O.D., 7 inch length NMR/EPR tube. Pack of 3 white holders. Features a pocket clip that keeps it secure. Made from unbreakable polymer material with a snap-on cap. Protection is provided for the sample and lab personnel during transport.
-
Pyrex® MAS Rotor Inserts
SP Wilmad-LabGlassDesigned for air-sensitive samples and semi-solid samples such as gels or highly viscous liquids, Pyrex® MAS Rotor Inserts allow samples to be sealed into an NMR rotor by heat-seal or epoxy. Note: A glove box may be required for sealing of air-sensitive samples.
-
X-Band Economy Brand EPR Suprasil® Tubes
SP Wilmad-LabGlassWilmad X-Band Economy Brand EPR Suprasil® tubes are manufactured from synthetic quartz which has 20 fold less paramagnetic impurities than naturally occurring quartz. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination …
-
5mm O.D. Medium Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
8mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
5mm Micro Cell Assembly
SP Wilmad-LabGlassSample volume can be as little as 18µL 3 different inserts with various shapes (Spherical Bulb, Capillary Tube and Cylindrical Bulb) Outer tube (Precision Thin Walled) must be ordered separately depending on magnetic field strength Not recommended for variable temperature experiments…
-
Screw Cap EPR Sample Tubes
SP Wilmad-LabGlassNow, sample tubes and storage vials have been joined! Save time and money with the Screw Cap EPR Tube; each come with a PTFE/Silicone Septum.
-
Pressure Vacuum Valve NMR Tubes
SP Wilmad-LabGlassWilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…