Vacuum Tubing

Compare Tool

Select up to 3 products

Vacuum Tubing
1 - 32 of 395
Sort
View
Show
  • Red Extruded Vacuum Tubing

    Thomas®

    Flexible, smooth-walled vacuum tubing High-quality gum rubber Cartons contain 48 to 50 feet (14.6 to 15.2 m) of vacuum tubing. Listings indicate i.d. x o.d. x wall thickness in inches. Vacuum tubing is 10 ft per pack and 50 ft per carton.

  • Tygon S3™ E-3603 Laboratory Tubing for Vacuum Applications

    Saint Gobain

    … E-3603 Vacuum Tubing has all of the same properties as the original E-3603 formulation, plus extra thick walls to support laboratory vacuum pump applications. Vacuum tubing features improvements to bend radius as well as higher and more consistent levels of working pressure and vacuum pressure…

  • High vacuum tubing

    Fischer Technical

    Tubing with 2ea. hose clamps, 1/2"ID. For use with all Fischer Technical "LAV" series high vacuum pumps.

  • Vacuum Tubing

    BrandTech®

  • 180 Clear Plastic PVC Vacuum Tubing

    Thermo Scientific Nalgene

    Make practical and efficient use of Thermo Scientific™ Nalgene™ 180 Clear Plastic Vacuum Tubing, thick-walled PVC which can withstand a full vacuum (80mm Hg) at room temperature. Material is Food-Grade and complies with USP VI and USDA regulations. Listings show I.D. x O.D. x wall…

  • Tygon® S3™ E-3603 Laboratory Tubing

    Kimble

    This tubing is used for drain, vent, and general laboratory applications, and is specially formulated for resistance to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters. …

  • Tygon S3™ E-3603 Laboratory Tubing

    Saint Gobain

    …laboratory applications, Tygon S 3™ E-3603 Tubing offers superior life, which minimizes the labor and expense of replacement. Applications: General laboratory Biopharmaceutical Food & beverage Peristaltic and vacuum pumps Analytical instruments …

  • Tygon® S3 E-3603 Laboratory Tubing for Vacuum Applications

    Saint Gobain

  • 180 Clear Plastic PVC Tubing

    Thermo Scientific Nalgene

    …with Thermo Scientific™ Nalgene™ 180 Clear Plastic PVC Tubing, which resists hardening and discoloration from a wide range of chemicals. Manufactured from the highest-grade resins and special plasticizers, this tubing is available in 50, 100, 250 and 500' cases. Meets Food…

  • Metal Quick Disconnect Couplings

    Bel-Art Products

    …liquid and gas connectors in biomedical instrumentation and general industrial applications Hose barb ends accept flexible tubing Chrome plated valves provide dependable operation Operate at temperatures to 82°C (180°F), pressures to 1.7 Mpa (250 psi), and vacuum to 30 microns of Hg

  • Laboratory High Vacuum Pump

    Fischer Technical

    …with vacuum ovens, bell jars, desiccators, and many more applications. Pumps achieve an ultimate vacuum of 25 microns in laboratory conditions. Tubing with 2ea. hose clamps, 1/2"ID.  For use with all Fischer Technical "LAV" series high vacuum pumps. High Vacuum Pump…

  • Sterility Test Manifold

    Advantec MFS

    …breaking the vacuum connection. The valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The main manifold outlet is 1/4"male to hose barb fitting connects to 3/8" ID tubing. The flushing…

  • Scienceware® Quick Connectors

    Bel-Art Products

    Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…

  • Schlenk Vacuum Sample Tubes

    Wilmad LabGlass

    These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

  • Norprene Industrial Grade Tubing

    Saint Gobain

    Formulation A-60-G, outlasts virtually all multi-service rubber tubings Heat sealable; ozone-resistant Abrasion-resistant Outstanding flexural fatigue resistance Low gas permeability versus rubber Will not weaken or crack with age Excellent resistance to inorganic fluids such as acids and…

  • Low Pressure/Vacuum Tubes

    Wilmad LabGlass

    Wilmad’s low pressure/vacuum (LPV) tube is ideal for anaerobic and gas-tight NMR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE piston…

  • Tubing Norprene 1/2X3/32 50Ft

    Saint Gobain

    Norprene® Industrial Grade Tubing outperforms neoprene, EPDM and other general purpose tubings in test after test and application after application. It will not weaken or crack after years of exposure to heat and ozone, providing long service in a wide range of applications such as gasketing,…

  • PYREX Vacuum Filter Flask

    Corning

    For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • Vacuum/Pressure Pur Tubing

    Thermo Scientific Nalgene

    Suitable for pressure and vacuum applications Nalgene® 8030 Clear, flexible polyurethane Usable with fuels and oils, weak acids, alkalies and aliphatic or mineral spirit solvents; not recommended for strong mineral acids, aromatic or halogenated solvents Contains no…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad LabGlass

    …the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks are ordered separately. The single tube washers (WG-1207-series) require flasks with vacuum side arms; LG-7800-102,104 or 106.

  • Vacuum Tubing Kit

    Labconco

    Desiccator Vacuum Tubing Kit. Vacuum Tubing Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle…

  • Pressure Vacuum Valve NMR Tubes

    Wilmad LabGlass

    Wilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE, all…

  • Chemistry Kit with 14/20 Standard Taper Joint Components

    Corning

    … PYREX® Stopper, (7575-14) Bleed Tube (7815-19) Adapter Tube w/ Thermometer Opening (8821-14) Rubber Thermometer Holder (7715) Vacuum Connecting Tube (8947-14 ) 3-Way Connecting Tube (9050-14) Claisen Connecting Tube (9050-14) Polyethylene Kit Box only (6949E-BO)…

  • Whatman SV 006 Vacuum Tubing

    GE Healthcare

    SV 006 Vacuum Tubing, 1 meter length, vacuum filtration apparatus accessories SV 006 Vacuum Tubing, 1 meter length, vacuum filtration apparatus accessories

  • Tygon® S3 Non-DEHP Tubing

    Saint Gobain

    …laboratory applications, Tygon S 3™ E-3603 Tubing offers superior life, which minimizes the labor and expense of replacement. Applications: General laboratory Biopharmaceutical Food & beverage Peristaltic and vacuum pumps Analytical instruments Regulatory Compliance:…

  • Vacuum Tubing

    HYVAC

    Wire Reinforced. Priced per Foot.

  • QuickTRAP™ Vacuum Protection System

    C.B.S. Scientific

    …cabinets for protection from beta radioiostopes. Primary and secondary traps. Tygon vacuum tubing with in-line ABS quick disconnect fittings. Hydrophobic PTFE filter with PP housing stops overflow into vacuum source.  Heavy duty Nalgene polyethylene bottle liquid storage containers, chemically…

  • Table-Top Buchner Funnels with Medium Porosity Removable Filter Plates

    Bel-Art Products

    …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • Scienceware® Vacuum Traps

    Bel-Art Products

    Vacuum trap and cap are made from corrosion and chemical-resistant polypropylene to provide ideal protection of vacuum sources from contaminants. Tube volume is 100mL; measures 32 x 160mm L Pressure-fittting cap features an inlet and outlet to fit 7.9mm (5/16") ID tubing

  • Intramedic Lower Density Polyethylene Micro Bore Tubing

    BD

    … Waxy, white, translucent, tasteless, odorless Lower density polyethylene micro bore tubing is flexible, but rigid enough for applications using vacuum and pressure. Durable over a wide temperature range, tubing maintains its form to 104°C and becomes brittle at -60°C. It can be sterilized through…

  • SYNTHWARE Reaction Tubes with High Vacuum Valve

    Kemtech America

    SYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.

  • Synthware Vacuum/Argon/Nitrogen Inlet Adapters

    Kemtech America

    Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. 

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.