Luer Connector

Synonyms: Luer Connectors Application: Modular female luer connectors to connect syringe barrels to chip for media exchange

Feature Safesite valves and Luer slip connector Automatic two-way valve for aspiration or injection of medication from inverted bags or semi-rigid plastic containers

fits 1/4 inch ID Tubing PP

Technical Features: 3/8 inch; 1/4 inch; 3/8 inch

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Materials: PC, MABS

… Film type: EVA Port 1:  Male luer connector with 1/8" barb + cap, 2' length 1/8" I.D. x 1/4" O.D. chemically resistant, heat sealable flexible tubing, slide clamp Port 2:  Male MPC connector with 3/8" barb + cap, 6" length 3/8"…

PTFE reservoir with luer connector, 30 mL

Sterile and disposable, adapters fit into standard infusion sets transforming them into winged blood collection sets. This allows multiple draws into evacuated tubes. Accepts standard tube holders.

… 304 stainless steel needle Standard 2” length Use with Luer Tip and Luer Lock syringes sold without needle or for Luer adapters. Nickel-plated brass or Kel-F (CTFE) hubs fit both male and female Luer connectors.They allow quick change of needle and use of different gauge and/or…

Convert Omnifit cap system fittings or 1/4"-28 UNF ports to Luer connectors Cap adapter replaces the colored cap on the cap system fittings and valves to convert it to a male or female Luer connection. The 1/4"-28 UNF adapters fit on 1/4"-28 UNF flat bottom ports of cap system…

…Qosina part #80147 is a swabbable, needleless injection site equipped with a male luer lock connector. Made of tinted polycarbonate and silicone, this luer-activated valve is opened by the stem of a male luer. Once connected to the female luer lock, the valve is open, allowing for flow of fluids.

Technical Features: fits 1/8 inch ID Tubing (0.125 inch, 3.2 mm)

Make solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available

Make solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available

Materials: PC

… Available in 10L and 20L sizes Film type: EVA Port 1:  Female MPC connector with 1/4" barb + plug, Slide clamp Port 2:  Male MPC connector with 1/4" barb + cap, Slide clamp Port 3:  Vinyl cap, Swabbable valve, Female luer with barb

…plastic male luer lock adapters. Uniquely designed to facilitate easy cleaning and maintenance. Male Luer Lock (MLL) – male luer slip with a threaded sheath for a secure fitting to a female luer lock. Male Luer (ML) – male luer slip that fits with a female luer. For…

…flash capabilities Has a pore size of 60Å and a carbon loading of ≈18% Make connections to flash chromatography instruments quick and easy with Luer connectors. Columns are made of polypropylene and have pressure ratings to support common flash chromatography back pressures.

… NH2 shows better peak shapes with polar and basic compound—ideal for carbohydrates Make connections to flash chromatography instruments quick and easy with Luer connectors. Columns are made of polypropylene and have pressure ratings to support common flash chromatography back pressures.

… Excellent for purification of a wide range of synthetic and natural compounds Make connections to flash chromatography instruments quick and easy with Luer connectors. Columns are made of polypropylene and have pressure ratings to support common flash chromatography back pressures.

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

316 Stainless For industrial use only.

…Valve for multiple, simultaneous deliveries to microtest plates Manifolds are stainless steel, with removable Teflon ® end caps and Luer connector for attachment to pall valve Autoclavable Straight-type manifolds have a central intake shaft perpendicular to manifold and Teflon plug…

…using male Luer connectors. All caps are autoclavable. Use activated carbon vapor trap with Luer connection to prevent any dangerous solvent from escaping into the laboratory. Connect 1/16" or 1/8" ID flexible tubing or 1/16” OD semi-rigid tubing to caps with Luer adapters. Plug…

Kel-F hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Standard needle length is 2" / 51 mm. Kel-F hub (KF) needles are available in convenient six packs. Custom lengths and point styles are available. These needles are available from 10 - 31…

Kel-F hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Standard needle length is 2" / 51 mm Kel-F hub (KF) needles are available in convenient six packs Custom lengths and point styles are available

Kel-F hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Standard needle length is 2" / 51 mm Kel-F hub (KF) needles are available in convenient six packs Custom lengths and point styles are available

Accessories for Sartorius Brand Filter Holders.

…Mechanism housed in a patented double shell ABS impact polymer casing. Ambidextrous infinite control trigger release air valve. Quick release luer slip connector. Six clinical cuff sizes available. ADCUFF™ nylon cuff with Size Guide™ marking system ensures proper cuff positioning and use…