PerkinElmer Lab Sampling Systems
-
Stainless Steel Sample Holding Loop for PerkinElmer Series 200 Autosampler. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.
-
45 mm 96 well microtiter plate, 1000 µL
PerkinElmer96-well Microtiter Polypropylene Plate compatible with Flexar autosamplers
-
100 mL PFA Bottle with Cap
PerkinElmerPFA bottles and vials are ideal for a wide range of demanding fluid handling and storage applications in general laboratory, semiconductor and environmental industries.
-
0.25mm i.d. DXi Internal Standard Tee
PerkinElmer0. 25mm i. d. DXi internal standard tee (PFA, green marker) Attaches to port #3 (DXi Version). Specially designed mixing tee is perfect for online addition of internal standard or online dilution. Achieves excellent mixing with minimal dead volume. 0. 5 mm i. d. capillary is recommended for…
-
-
Seal Holder
PerkinElmerThe PerkinElmer seal holder is made from dense PEEK material and is compatible to use with XQ80 and XF100 pressure vessels that are installed in the multi-wave 3000 instruments.
-
There are two 6-foot pieces of tubing included in the kit. For use with oils applications.
-
It includes: 6 ft (1.82 m) 1/8" I.D. Tygon ® tubing 1 - Y connector assembly w/ attached Tygon tubing 1 - 20 cm length 1/8" in I.D. Tygon tubing 1 - 12.7 cm length 1/8" I.D. Tygon tubing 2 - uptake lines w/ 1.2 m 1/8" I.D. Tygon w/ 30 cm 3/32" I.D. FEP tubing 2 - 4.25" lengths of 1.6 mm…
-
This 45-position sample/collection rack features wells designed for 120 mL vials. It's compatible with the APS-1650.
-
-
Sample Loop
PerkinElmerThe PerkinElmer sample with a volume capacity of 2 uL is made from sturdy PEEK material and is mainly used in laboratory and manufacturing factories.
-
500µL Sample Loops
PerkinElmerIf both NaBH4 and SnCl2 are to be used as reducing agents with FIAS systems configured for Hg/hydride determinations. It is strongly recommended that separate mixing manifolds, gas-liquid separators, quartz cells, and required tubing and connectors be dedicated for use with each reducing agent. Can…
-
This stirrer block is compatible with the ASX-1400 and ASX-1600 that are configured with the 90-position CETAC, 96-position CETAC, and 90-position Bel-Air racks.
-
-
SC Autosampler Probe PTFE 0.8mm ID
PerkinElmerA contoured design reduces carryover, while an all PFA wetted sample flow path reduces contamination. SC Autosampler Probe, Carbon fiber support, 0.8mm ID blue marker), long probe, long capillary, connects to port #5 (¼-28 fitting) high flow.
-
Nujol, 100mL
PerkinElmerNujol is used for solid sample preparation for transmission infrared spectroscopy.
-
Turntable for Standard 75 mL (40 Bar) Digestion Vessels with gas collection system for Titan MPS™ 8 and 16 Position Microwave Sample Preparation Systems.Vessels, vent tube, and consumables are not included.
-
Sample Tray Cover
PerkinElmerThe PerkinElmer sample tray cover is installed on the auto sampler tray of AS-800 and AS-900 absorption instruments to cover the sample cups.
-
Probe Support Adapter Assembly
PerkinElmerThe PerkinElmer probe support adapter assembly is designed to use with S10/AS93 with upper (PFA) and lower (PP) supports.
-
Rectangular Long Path Cell Holder
PerkinElmerThe Rectangular Long-Path Cell Holder accepts cells with pathlengths from 10 to 100 mm. This optional cell holder is easy to install and has the same footprint as the Standard Cell Holder. It is designed for a precise fit and gives you maximum reproducibility.
-
Connector IA with Nipples for 1.7mm to 3.2mm Inner Diameter Tubes for FIAS-100, FIAS-400, FIAS-400MS, FIAS-200 and FIMS
-
Replaceable quartz window that slides into the purge extension between the torch and the optics.
-
Sample Loop
PerkinElmerThe PerkinElmer sample with a volume capacity of 5 uL is made from solid stainless steel material and is mainly used in laboratory and manufacturing factories.
-
-
-
-
Stainless Steel Needles with 12 Position
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
Microtiter Cover Mat
PerkinElmerThe PerkinElmer microtiter cover mat can be used with both shallow plates as well as deep plates.
-
-
Teledyne CETAC Ultem Autosampler Probe
PerkinElmerThe Teledyne CETAC auto sampler probe is designed to use for the purpose of spectroscopy elemental isotope analysis. Probe is made from unique ultem material that offers added density.
-
-