ICP-MS

Compare Tool

Select up to 3 products

1 - 32 of 396
Sort
View
Show
  • The MEINHARD® concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. For use with high dissolved solids solutions.

  • PTFE Capillary Tubing

    PerkinElmer

    PFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.

  • This kit includes: PTFE 0.965 mm I.D. Drain Tubing, Qty. 6 (02506495) Hyper Skimmer O-Ring, Qty. 2 (09902123) Flared PVC 0.38 mm I.D. Green/Orange Pump Tubing, Qty. 4 (N0777042) Santoprene ™ 1.30 mm I.D. Gray/Gray Pump Tubing, Qty. 4 (N0777444) 0-Slot Quartz Torch, Qty. 1 (N8122006) Quartz…

  • Demountable quartz torch for o-ring-free injectors. Use with ESI o-ring-free injectors.

  • This cyclonic spray chamber PTFE-coated o-ring kit, for the nebulizer adaptor plug 16/6, (N0776006) is used with all Optima ICP-OES and ELAN and NexION ICP-MS series instruments.

  • The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully…

  • Nebulizer liquid fitting with ETFE capillary tubing - 4 length by 0. 020 ID x 0. 062 OD flanged onto female CTFE fitting Includes one male barb CTFE fitting.

  • The UniFit sample tube connector is used with U-Series nebulizers.

  • The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…

  • This kit includes: Fixed 2.5 mm Injector Quartz Torch (Green Mark) qty.2 (N8152473) Torch Injector Nut qty.2 (N8152451) Glass Cyclonic High Sensitivity Spray Chamber with Matrix Gas Port qty.1 (N8152389) Threaded Spray Chamber Drain Line qty. 2 (N8152456) Nickel Skimmer Cone qty.2 (W1026356) …

  • Nickel Skimmer Cone

    PerkinElmer

    Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. The ELAN sampler cone, with a 1.1 mm orifice diameter, and the skimmer cone, with a 0.9 mm orifice diameter, are the largest in the industry. They…

  • Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. The ELAN sampler cone, with a 1.1 mm orifice diameter, and the skimmer cone, with a 0.9 mm orifice diameter, are the largest in the industry. They…

  • Part of the Organics Kit 4300 V/5300 V/7300 V which includes: 3 Slot Quartz Torch, Quartz Bonnet, 1.2 mm i.d. Alumina Injector, Baffled Cyclonic Spray Chamber, GemCone ™ Low-Flow Nebulizer, Quartz Torch Copper Ignitor Tape – Qty. 120 pcs.

  • F0 Encapsulated micro tubing for microflow rates with the lowest internal volume of any nebulizer. Includes 0. 25 mm i. d. (green marker) 70 cm long micro capillary. Compatible with all MEINHARD Plus nebulizers.

  • The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.

  • This one-piece quartz torch, marked blue, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Base Configuration's Sample Introduction Kit (N8150034).

  • Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

  • Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum…

  • The D-Torch is a revolutionary new demountable torch design with interchangeable outer Tubes. Quartz outer Tubes are ideal for most aqueous samples, while ceramic outer Tubes last longer for samples with high dissolving solids or for organic applications, such as wear metals in engine oils.

  • Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

  • The o-ring-free Tracey spray chamber, made of tetrafluoroethylene (TFE), is designed to be hydrofluoric acid-resistant. It does not have an internal baffle feature. Its precision is considered good and its purity is considered good. They can be teamed with the PolyCon HF-resistant nebulizers to…

  • This kit includes: 0-Slot Quartz Torch, Qty. 1 (N0770344) GemCone ™ Low-Flow Nebulizer, Qty. 1 (N0770358) Baffled Cyclonic Spray Chamber Assembly, Qty. 1 (N0770612) 2.0 mm I.D. Quartz Injector, Qty. 1 (N0775014) 1.6 mm I.D. Quartz Injector, Qty. 1 (N0775223) Injector Support Adapter, Qty. 1…

  • This kit includes: Demountable Quartz Torch PVDF qty.2 (N8152379) 2.0 mm Demountable Quartz Injector qty.2 (N8152376) Torch Injector Nut qty.2 (N8152451) Glass Cyclonic High Sensitivity Spray Chamber with Matrix Gas Port qty.1 (N8152389) Threaded Spray Chamber Drain Line qty.2 (N8152456) …

  • .043ODx.018 ID polyethylene tubing 100ft for Mira Mist Nebulizer

  • OpalMist Nebulizer 2mL/min

  • The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully…

  • The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…

  • The PEEK Ari Mist ® nebulizer provides very low sample flow and is for samples that are particlate free. Operates on stand pressures of 40 - 50 psi. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features an enhanced parallel path design.

  • This metal ball joint clip with tension screw is used to connect the spray chamber and torch in Optima 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

  • The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. The cyclonic spray chamber relies on momentum to efficiently and quickly remove the larger droplets from the…

  • Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

  • This baffled cyclonic spray chamber, made of borosilicate glass, is an integral part of the sample introduction system responsible for filtering the sample mist to permit appropriate droplet size distribution to reach the plasma. The spray chamber features a sand-blasted neck with EZ seal fitting…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.