The Torch Mount UV Shield secures the spray chamber to the base of the injector and blocks UV light from the plasma in the NexION 2000 ICP-MS.

Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler (rinsing-port rack) with rinsing port location (location 0) and 20 locations for 50 mL solution containers.

PerkinElmer translucent polypropylene tubes are designed to provide excellent chemical resistance. PerformR ™ 15 mL and 50 mL conical tubes are designed for your routine everyday applications and storage needs. SuperClear ™ tubes are made from a unique medical grade resin. PerformR and SuperClear…

This 40-position autosampler sample rack features square holes, with side length of 20.6 mm, designed for 20 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

28 mm o.d. polypropylene tube with screw cap, Quantity: 50, Volume: 50 mL. Non-PFA sample vessels manufactured from plastics, such as polypropylene, polyethylene and polystyrene, are a sensible alternative to consider when breakage, surface inertness, and/or disposal costs are a concern.

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Consists of stainless steel sampling probe and screw fitting, and FIAS capillary tubing assembly 4. Replaces P/N B0501044.

The bench top fume hoods for SPB systems are the right choice for trace-metal digestions. Made from clear, acid resistant polycarbonate with a solid surface material base, the fume hood eliminates the risk of trace-metal contamination common with traditional fume hoods. HEPA ® filters ensure clean…

These 20 mL polypropylene tubes, with screw caps, have an outer diameter of 20 mm and are designed to provide excellent chemical resistance.

This 24-position autosampler sample rack features square holes, with side length of 25.2 mm, designed for 30 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

Includes: Pressure Seal Vessel Cap with DPC Rupture Disc Vessel Base

The vacuum assisted Digi FILTER assembly provides a quick and easy way to filter samples prior to analysis.

This 90-position autosampler sample rack features round holes, 13.3 mm in diameter, designed for 8 mL round-bottom and 7 mL flat-bottom vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as…

A contoured design reduces carryover, while an all PFA wetted sample flow path reduces contamination. SC Autosampler Probe, Carbon fiber support, 1.0mm ID (gray marker), long probe, long capillary, connects to port #5 (¼-28 fitting) high flow.

Diameter: 14 mm

Replacement probes for ESI autosamplers. All perfluoroalkyl (PFA) wetted sample flow path reduces contamination and provides chemical resistance.

This 60-position autosampler sample rack features square holes, with side length of 17.0 mm, designed for 14 mL and 15 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as…

The ASXPRESS PLUS Ultem (polyetherimide) sample probe is 12 inches in length, and with tubing, has a capillary length of 75 inches. It requires a Z-drive guide plate. This probe kit Includes: PFA capillary tubing Capillary tube connection fitting Probe clamps, qty. 2 Ferrule, qty. 1

This 96-position sample/collection rack features wells designed for 8 mL to 13 mL vials. It's compatible with the ASX-260, ASX-280, ASX-520, ASX-520HS, ASX-560, EXR-8, XLR-8, XLR-860, and ASX-1600 and the APS-1650.

TFM Pressure Seal for High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 16 Position Microwave Sample Preparation Systems. Made of TFM Quantity: set of 5

PFA bottles and vials are ideal for a wide range of demanding fluid handling and storage applications in general laboratory, semiconductor and environmental industries.

Includes two Syrix syringe pump modules and two FAST valves with controllers. The continuum has many applications from the continuous pumping of <10 µL/min organic solvent carrier solution, to independent control of two syringe pumps and two valves for sample manipulation and dilution. Continuum…

Female luer to 1/4-28, ETFE, qty. 5

OilExpress ™ 4 system delivers highly automated, rapid, reliable oil condition monitoring results using recognized industry standard protocols such as ASTM ® , JOAP and Caterpillar ® S•O•S ? . We offer a range of solutions for fast and accurate IR analysis of in-service lubricants based on the…

Forming tool for pressure seals used with High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 8 Position Microwave Sample Preparation Systems. Forms 1 seal.

In-Line Check Valve for Pumped Rinse Kit, 1/4-28 threaded inlet & outlet

Liner for High Pressure 100 mL (100 Bar) Digestion Vessel made of TFM for Titan MPS 8 Position Microwave Sample Preparation Systems.

PFA-100 Apex MicroFlow Nebulizer with Ultem manual sampling probe, 90-150 µL/min, 80cm capillary.

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

Microtiter plates are ideal for micro volume applications such as storage and sample transfer. 1 Pack (5 each) 48 well, 5 mL microtiter plate, square well, pyramid bottom.

Metal Large Rack, 21 position, 30mm o.d.

We offer several storage racks for storing DigiTUBEs. The plastic storage rack stores 50 mL DigiTUBEs and comes in packs of 5.