Two sizes of aluminum capsules are available. The smaller, with an internal volume of 4 mL, can hold sample weights up to 2.5 mg. The larger, with a 30 mL internal volume, accommodates samples up to 20 mg. Sealing of the larger capsule should be carried out in the presence of helium or argon to…

This EDTA calibration standard is used for nitrogen analysis with 2410 Series II Nitrogen Analyzer.

Butyl Rubber Stoppers create a gas-tight seal for improved stability.

This bench top easy-to-operate press allows creation of the highest quality KBr pellets. It is used with the Evacuable KBr die to prepare high quality 13 mm pellets. Requires, but does not include the Evacuable KBr Die (51001144), the KBr Pellet Holder (04810949), and the Adjustable Adapter…

Choose the right septa for your analysis. Although a wide variety of septa is available, chemical compatibility and temperature are the most critical to the analysis. Temperature applies not only to the vial, but also to the temperature of the instrument’s needle used for pressurization and sample…

Graph/Ves Ferrule 1/8 x 1/16, Pkg. 10

The function of the L'vov platform is to isolate the sample from the tube walls to allow more reproducible atomization of the sample through indirect heating. The platform heats primarily by the radiation given off from the tube walls. Sample vaporization and atomization occur after the tube…

A great choice when quiet, dependable and clean air is a must. Each compressor comes assembled on an internally and externally coated air tank and includes a self-purging regenerative dryer with after cooler. The version with the sound enclosure has a sound level of less than 60 dB. Models in 115 V…

Viton O-Ring for Glass Liners, Pkg 1

Syringe-500ul 750N Point St-3

Replacement 10 micron filter for P/N 09903665.

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

This two-stage regulator has a brass body and stainless steel diaphragm and guarantees constant delivery pressure regardless of variations in cylinder pressure. Maximum inlet pressure is 3000psi, and the CGA fitting size is 580. A Swagelok™ 1/4in npt to 1/8in fitting (P/N 09903471) is included.…

The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.4 mL/min are fitted with a UniFit connector with 1.3 O.D. x 0.50 mm I.D. x 700 mm long sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are…

PerkinElmer translucent polypropylene tubes are designed to provide excellent chemical resistance. PerformR ™ 15 mL and 50 mL conical tubes are designed for your routine everyday applications and storage needs. SuperClear ™ tubes are made from a unique medical grade resin. PerformR and SuperClear…

The size designations of stainless steel loops are nominal. The actual volumes can differ from the theoretical designations because of the ± 0.025 mm (0.001") tolerance of the metal tubing bore. Accuracy of large metal loops (1.0 mm, 0.040" bore) is about ±5%, intermediate loops (0.5 mm, 0.020"…

This 40-position autosampler sample rack features square holes, with side length of 20.6 mm, designed for 20 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

Our polysulfide oil products offer high purity, low volatility, and minimal diffusion through sample films. These standards are well suited to ultra low level sulfur analysis, quality control, drift correction, blank measurement and calibration standards for XRF and other sulfur analysis…

The Titan MPS is a flexible easy-to-use microwave sample preparation system for pressure digestion of a broad range of samples for subsequent inorganic analysis.

Lumina hollow cathode lamps may also be used with all earlier AA spectrometers that do not have automatic code reading capability by using an appropriate adapter cable.

5.0 mL GC Gas Tight Syringe, Fixed Needle

Concentration: 1,000 µg/mL Matrix: 2% HNO₃ Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate …

This 60-position autosampler sample rack features square holes, with side length of 17.0 mm, designed for 14 mL and 15 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as…

The PolyScience ® WhisperCool ® Refrigerated Chiller is designed to deliver quiet and reliable performance over a broad range of operating temperatures and conditions. Extremely dependable and energy ef cient, it features a -10 to 40 °C operating temperature range, built-in process and equipment…

Two-stage regulator for precise outlet pressure control. Brass body and stainless steel diaphragm for long life and minimum maintenance. Maximum inlet pressure of20,700 KPa. Supplied with CGA-580adapter. Approximate weight: 1.3 Kg.

28 mm o.d. polypropylene tube with screw cap, Quantity: 50, Volume: 50 mL. Non-PFA sample vessels manufactured from plastics, such as polypropylene, polyethylene and polystyrene, are a sensible alternative to consider when breakage, surface inertness, and/or disposal costs are a concern.

Horse Power: 1.5 Hp Output CFM/Output L.: 6.0 CFM/170 L. Min Max Pressure PSI/Max Pressure Bar: 120 PSI/8 bar Noise Level: 72 dB/A, with Enclosure 55 dB/A Tank Size Gal./Tank Size L: 13 Gallons/50 Liters Dimensions: 25 x 18 x 29 / with Enclosure 29 x 23 x 32 Weight: 97 Lbs. / with…

Bending, Dual Cantilever principle