F2 Standard Integrated Capillary (standard fitting with + nebulizers). F2 Standard integrated capillary for self-aspiration or pumping. Includes 0. 5 mm i.d. (orange marker) 70 cm long capillary.

The UniFit connector is a convenient drain connector for glass cyclonic spray chambers.

PFA MicroFlow high solids large bore nebulizer with external 1/4-28 threaded connector. Ideal for strong acids, high solids, alkalis, organic solvents, soils and high salt solutions.

This kit includes: MicroMist ™ Nebulizer, Qty. 1 (N0775342) Quartz Cyclonic Spray Chamber, Qty. 1 (WE025221) 2 mm I.D. Quartz Bore Injector, Qty. 1 (WE023948) Tygon Tubing 3.175 mm I.D., Qty. 1 (02506516) 3.175 mm Tubing Insert, Qty. 1 (09903094) Front Ferrule for 6.35 mm Tube Fitting, Qty.…

Material: Borosilicate glass  High physical reproducibility ~ 1%, TDS tolerance, typically up to 20%, High tolerance to particulates, typically up to 75um, Low RSD's due to highly accurate construction

Quick Release for PE Optima 2000, 4000, 5000 series.

Can be used with either the glass Cyclonic spray chamber or the Ryton ® MEINHARD ® end cap. RequiresMEINHARD ® End Cap II, P/N N0680504, when used with the Ryton ® double-pass, Scott-type spray chamber(glass or Ryton).

The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…

This module kit includes: External Spray Chamber, Qty. 1 (N0791499) Inner Chamber for External Ryton/Type II Spray Chamber, Qty. 1 (N0582258) 2 mm I.D. Alumina Injector, Qty. 1 (N0791183) 1-Slot Quartz Torch, Qty. 1 (N0790131) End Cap Assembly for GemTip Cross-Flow Nebulizer, Qty. 1 (N0780546)…

The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.

Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. The torch operates at 25% reduced argon gas flows compared to the standard demountable quartz torch (N8122006). The High Efficiency Quartz Torch Installation Kit (W1007468) is required for first-time installations…

The MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…

The ST3 MicroFlow PFA nebulizer has an exchangeable external sample uptake capillary. The sample uptake rate is controlled by the diameter of the external capillary or probe.

Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

This one-piece quartz torch, marked blue, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Base Configuration's Sample Introduction Kit (N8150034).

The internal standard mixing tee is perfect for online addition of internal standard or online dilution. Achieves excellent mixing with minimal dead volume.

This baffled cyclonic spray chamber, made of quartz, is designed for all-purpose, non-hydrofluoric acid applications. It provides excellent sensitivity, stability and low blanks.

The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization effciency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts, and conferring signifcant…

This kit includes: O-Ring 29.74 mm I.D., Qty. 1 (09902131) O-Ring 20.3 mm I.D., Qty. 2 (09902223) O-Ring 28.17 mm I.D., Qty. 1 (09921061) O-Ring 26.57 mm I.D., Qty. 1 (09921062) Silicone Super-O-Lube, 2 grams (09200078)

PFA-ST self-aspirating nebulizer for prepFAST, with external 1/4-28 threaded connector.

PFA-400 nebulizer with integrated capillary.

200 µL/min self-aspirating sample capillary for ST nebulizer. 0.30 mm i.d., yellow marker

This kit includes: O-Ring 6.07 mm I.D., Qty. 2 (09902207) O-Ring 8.74 mm I.D., Qty. 2 (09921028) Fluorocarbon Rubber Rod Seal 6 mm I.D. & 10 mm O.D., Qty. 2 (09923509)

This Kit includes: Viton ® O-Ring 20.29 mm I.D. (09210598) O-Ring 29.74 mm I.D. (09902131) O-Ring 36.09 mm I.D. (09921058) O-Ring 26.57 mm I.D. (09921062) Round Window 31.75 mm Diameter (09992731) Tube Assembly - Century B Radial View (09992731)

This one-piece SilQ torch, marked white, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Semiconductor Configuration's Sample Intruduction Kit (N8150037).

This nebulizer clip snapper, for MEINHARD nebulizers, is used with Avio 200 and 500 ICP-OES, and Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.

The baffled cyclonic spray chamber, made of perfluoroalkoxy alkanes (PFA), is an all-purpose hydrofluoric acid-resistant spray chamber. It features o-ring-free connections to the nebulizer and torch injector, secure, leak-free threaded drain port, internal baffle, and threaded auxiliary port for…

Includes:  EzyLok Connector for 4mm Tubing  EzyLok 6mm Hose Adaptor  Nebulizer Hose Clip

The baffled cyclonic spray chamber, made of quartz, is an all-purpose spray chamber for non-hydrofluoric acid samples. It features o-ring-free connections to the nebulizer and torch injector, secure, leak-free threaded drain port, internal baffle, and threaded auxiliary port for gas addition. The…

This o-ring replaces the obsolete o-ring N0777844.

Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…

The D-Torch is a revolutionary new demountable torch design with interchangeable outer Tubes. Quartz outer Tubes are ideal for most aqueous samples, while ceramic outer Tubes last longer for samples with high dissolving solids or for organic applications, such as wear metals in engine oils.