LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with…

All-layer sampler, with open inner tube, no separate chambers, and large sampling volume. For all-layer samples through all the layers of the sample. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be…

Immersion cylinder for sampling crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants in Explosion Categories IIA, IIB and IIC. Completely made from non-spark producing materials, nickel-plated. Dipping containers are used in various areas…

The SteriPlast® Bio sample spoon made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

Sampler for deep-frozen and semi-solid substances products in the food industry. The sharp sawing crown of the very robust hollow borer rapidly cuts into the sample. A cylindrical sample (cross-sectional sample) of up to 20 cm can be cut out. Ice borer consisting of three parts: Borer, borer head…

The spoon spatula is a double spatula with a 0.5 ml spoon and a 17 mm spatula blade. The spoon spatula has many different uses in labs – as a sampling spoon, for measuring or transferring small amounts, as a scraper or for mixing and stirring. Specially designed for disposable use,…

The LaboPlast® disposable scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop) and individually wrapped for disposable use. The disposable scoop is ideal for powders, granulates and pastes. The scoop with transparent cover…

Burkle ZoneDispo is for pourable bulk goods up to 2 mm particle size. For cross-section samples through all layers of a sample. Three openings, hole diameter 11 mm. (22mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples,…

Sampler for ground water samples from wells, pits and other sources. Fits all normal well shafts with control openings to Ø 2", without tilting or getting stuck. Ultra pure materials guarantee the highest degree of sample purity. Easy to clean thanks to rounded edges and threads. …

Jumbo sampler with a tube diameter of 50 mm, ideal for coarse grains and larger quantities. With an open inner tube and large sampling volume, for all-layer samples through all layers of the sample or with sample chambers separated by PTFE separators for multi point sampling from several…

The LaboPlast® Bio disposable spoon made of green PE is produced in our clean room of class 7 (10,000) and individually wrapped in bio-PE film for disposable use. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is manufactured from renewable raw…

For dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materials. Tensile load max. up to 10 kg.

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually wrapped for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and…

Burkle LiquiDispo for low-viscosity liquids up to approximately 10,000 mPa·s. (21mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of liquids, viscous substances, powders,…

The LaboPlast® disposable spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000) and individually wrapped for disposable use. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into…

Universal powder and granules sampler made of stainless steel AISI 316L (1.4404). Developed initially for milk powder samples, conforms to standards of DIN and IDF (International Dairy Federation). The collector is inserted into bags or casks and the sample is removed using a semi-circular profile…

The SteriPlast® spoon for foodstuffs, made of polystyrene, is produced in our class 7 clean room (10,000), individually wrapped for disposable use and then sterilised by gamma rays. The spoon for foodstuffs is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a…

The SiloPicker is ideal for taking bulk goods samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m. The insertion depth depends on the density of the bulk goods. Stainless steel AISI 316L (1.4404)

The all-layer drill is a special zone collector specifically designed for heavily compacted substances. Often it is very difficult or impossible with conventional zone collectors to penetrate media of this type and take a sample extending through all layers. By contrast, the drilling blades of the…

Burkle PowderDispo is ideal for taking a cross-sectional sample from within a bulk powder. Length of sample chamber 500mm. (22mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of…

The ChemoSampler was developed for sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport. Samples can…

The SteriPlast® sample spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000), individually wrapped for disposable use and then sterilised by gamma rays. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to…

Emptying the multi-collector chambers separately can take place via Quali-Paper or the sealing sleeves. It is more comfortable and even faster with the emptying stand. The samples in the collection chambers can be emptied directly into the sample containers. Just place the multi-collector onto the…

Burkle ViscoDispo is for high-viscosity liquids up to max. 100,000 mPa·s. (21mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of liquids, viscous substances, powders,…

Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to the sampling container. Easy cleaning for flawless sampling. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm. …

It is possible to carry out point sampling of liquids of varying viscosity with the stainless steel Liquid CupSampler AISI 316L (1.4404). Media-containing particles can also be sampled without difficulty. The sampler can be used in the fields of chemistry, foodstuffs and cosmetics. The cup…

DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml, up to 200 ml. An ergonomic handle and a spout on both sides for right or left-hand operation make handling simple and easy. …

Available either in a large package with 100 pieces or 100 pieces packaged individually and radiation sterilised. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual…

Burkle DispoTube ergonomic handle makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves. (21mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and…

Sampler for all-layer samples of viscous, paste-like, semi-liquid substances, according to DIN 51750 pt. 3 and DIN EN ISO 15528. Different layers remain intact particularly with paste-like substances. Stainless steel AISI 316L (1.4404) 32 mm Ø Optimised opening mechanism (can be…

This sample scoop has been developed in order to meet the high requirements of the pharmaceutical industry, such as those contained in the FDA regulations. Like all samplers for the pharmaceutical industry, they are made of stainless steel AISI 316 without edges, crevices or undercuts in which…

Sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. The scaled sample container can be used for an exact measurement and it shows contents up to 50 ml or 1.5 oz.…