PerkinElmer Lab Sampling Systems
-
Type B Sample Tray
PerkinElmerThe PerkinElmer Type B sample tray with a sample capacity of 98 can hold 15 mL and 16 mL sample vessels and is used with PerkinElmer AS-90/90A/90plus auto sampler.
-
For Relative Specular Reflectance Accessory, 6° (B0086703) and Variable Angle Re ectance Accessory (B0137314). This mirror is not calibrated.
-
The size designations of stainless steel loops are nominal. Theactual volumes can differ from the theoretical designations becauseof the ± 0.025 mm (0.001") tolerance of the metal tubingbore. Accuracy of large metal loops (1.0 mm, 0.040" bore) is about±5%, intermediate loops (0.5 mm, 0.020" bore)…
-
2.5mL Polypropylene Disposable Sample Cups
PerkinElmerSample cups are of heavy-duty construction to prevent cracking or tipping. Their conical design allows for use of nearly the entire sample. Translucent; preferred for most solvents.
-
The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler with 60 locations for 15 mL solution containers.
-
Probe Support Adapter Assembly
PerkinElmerThe PerkinElmer probe support adapter assembly is designed to use with S10/AS93 with upper (PFA) and lower (PP) supports.
-
These 8 mL polystyrene round bottom tubes have an outer diameter of 13 mm.
-
Stainless Steel Sample Holding Loop for PerkinElmer Series 200 Autosampler. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.
-
ESI Autosampler Probe .80mm
PerkinElmer135 mm- probe support length (length of carbon fiber) 80 cm- capillary length after the probe to the nebulizer connection
-
High Flow ST nebulizer line, connects to port #3 0.25 i.d. (green marker)
-
-
Purge Tube O-Ring
PerkinElmerThe PerkinElmer purge tube O-ring measuring 0.674 in ID x 0.1 in W is designed to use with dual view radial purge tube.
-
High Pressure 100 mL (100 Bar) Digestion Vessel opening station for Titan MPS 8 Position Microwave Sample Preparation Systems.
-
ESI Autosampler Probe Line Holder
PerkinElmerThe ESI auto sampler probe line holder is made from ICP-MS and ICP-OES technologies and holds the probes tightly when the probe is in operation.
-
Made of titanium, set of 10 pcs
-
-
Forming tool for pressure seals used with High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 8 Position Microwave Sample Preparation Systems. Forms 1 seal.
-
Vacuum Pump 115V
PerkinElmerThe vacuum assisted Digi FILTER assembly provides a quick and easy way to filter samples prior to analysis.
-
4 mL Graduated PFA Micro Vials without Caps
PerkinElmerThese vials are ideal for applications that require the highest sensitivity. Made of ultra-pure, ultra-chemically resistant material, these vials are an excellent choice for high purity, semiconductor and micro-samples. Benefits: Non-contaminating Graduated Temperature range of -200 °C to 260…
-
-
Seal Holder
PerkinElmerThe PerkinElmer seal holder is made from dense PEEK material and is compatible to use with XQ80 and XF100 pressure vessels that are installed in the multi-wave 3000 instruments.
-
Stainless Steel Needles with 24 Position
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
Glass Chamber with 12 Positions
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of…
-
Vessel base made of TFM for High Pressure 100 mL (100 Bar) Digestion Vessel for Titan MPS 8 Position Microwave Sample Preparation Systems.
-
This 45-position sample/collection rack features wells designed for 120 mL vials. It's compatible with the APS-1650.
-
-
-
Screw for Digestion Vessels with Direct Pressure Control (DPC) for High Pressure 100 mL (100 Bar) Digestion vessel for Titan MPS 8 Position Microwave Sample Preparation Systems.
-
Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.
-
The size designations of stainless steel loops are nominal. Theactual volumes can differ from the theoretical designations becauseof the ± 0.025 mm (0.001") tolerance of the metal tubingbore. Accuracy of large metal loops (1.0 mm, 0.040" bore) is about±5%, intermediate loops (0.5 mm, 0.020" bore)…
-
Metal loops will often absorb sample components resulting in inaccurate quantitative results. In addition, metal loops may be corroded by high-salt buffers and chloride salts. Sample Loops are made from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically…
-
20 mL Polypropylene Vials with Screw Caps
PerkinElmerThese 20 mL polypropylene tubes, with screw caps, have an outer diameter of 20 mm and are designed to provide excellent chemical resistance.