Ace Glass Lab Glassware
-
Joints, Outer Member, Straight-Sided
Ace GlassO.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.
-
Distilling Head
Ace GlassNewman stopcock facilitates reflux ratio adjustment and reduces hold-up on walls; product drops directly into receiver. Stopcocks are arranged for convenient manipulation and are placed so that the head may be used in either right or left-hand setup. T
-
Moisture Test Receiver, Dean & Stark
Ace GlassWith return line to allow excess solvent to return to boiling flask. Suitable for ASTM D 95 and E 123. Joints are 24/40.
-
Reflux Apparatus, Continuous, Fuchs
Ace GlassContinuous reflux apparatus keeps solvents pure and free of oxygen. Compact, upright design allows multiple units to be assembled in small areas. Distillation column is 250mm long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert…
-
Immersion Well, Photochemical, Plain
Ace GlassQuartz immersion well, triple-walled, unjointed (plain) for use in our 6962,7863,7864,7865 & 7891 series reactor bodies. Designed for low temperature reactions cooled up to -78 degrees C. The outer two walls are permanently sealed and evacuated. The inner removable tube set consists of one each…
-
Moisture Test Receiver
Ace GlassModified Bidwell & Sterling with overflow to allow excess solvent to return to boiling flask. Both capacities are calibrated in 0.1mL subdivisions. Joints are standard taper 24/40.
-
Adapter, Thermometer
Ace GlassAdapter, standard taper joint, 13mm OD center tube with bead,6mm OD tube end side arm.
-
Distilling Receiver
Ace GlassCentrifugal type, calibrated to contain. Graduated in 0.1mL subdivisions. Total capacity 15mL.
-
Adapter, Liquid Inlet
Ace GlassWith 24/40 standard taper inner joint and vacuum take-off. Hose connection is size D.
-
-
Distilling Column, Perforated, Hempel
Ace GlassWith standard taper joints and perforated glass disc for packing support. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.
-
Straight connecting adapter with standard taper inner joints at both ends. Various lengths.
-
-
Tube, Capillary Gas Delivery
Ace GlassMicroscale bent capillary gas delivery tube for transferring gases generated during reactions to storage containers, such as 9588 Sampling Reservoir. With inner joint.
-
Adapter Connecting, NO-AIR
Ace GlassThree way, Y shaped adapter. 2-outer standard taper joints, 1-inner standard taper joint. All three the same size. Great for joining flasks and other components for Schlenk lines.
-
Adapter, Distilling, Ace-Thred
Ace GlassFor connecting distilling column with vertical condenser. Top has #7 Ace-Thred for use with 5029 bushing and adjustable length thermo-meter. Side arm at 75 degree, vertical side arm 17.8cm from center tube. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.
-
Septa, Rubber
Ace GlassSepta tops are flanged with a sleeve-like extension that folds down over the vessel's neck. Punctured diaphragm re-seals after syringe is withdrawn. Septa are supplied in a variety of sizes, red, white or grey rubber.
-
Still, Solvent Recovery
Ace GlassWhen attached to the top of Snyder Column, unit is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations. PTFE stopcock (1:5, 2mm bore) provides option for total reflux or takeoff. #7 Ace-Thred on side arm accepts tubing 6 - 7mm O.D. 5029-10 Nylon bushing and…
-
Distilling Apparatus, High Boiling
Ace GlassUseful for separating higher boiling liquids that require a short pot-to-column distance to prevent excessive condensation. If pot bleed is desired a two-neck flask can be used. Thermometer joint is 10/18 for 9551, 25mm immersion.
-
-
-
Adapter, Hose Connection, Metering Valve
Ace GlassAdapter with outer joint top, hose connection bottom, glass or PTFE plugged metering valve. See 8223-02 glass or 8224-04 PTFE replacement plugs.
-
Outer standard taper joint at angle of 105 degree. Used with distillation set-ups. With long stem. Hose connection opposite joint. Stem below joint is 175mm.
-
Storage Tube, Schlenk
Ace GlassSimilar to No. 7759, except with 2mm bore PTFE stopcock on 20 and 80mL sizes, 3mm bore PTFE on 250mL size. In addition to collecting and filtering, this vessel may be used as a crystallizer. With two standard taper 14/20 or 24/25 outer joints and two standard taper 14/35 or 24/40 inner. With…
-
Adapter with Ace-Thred
Ace GlassAdapter with ground joint at bottom and either a #11, #15, #25 or #36 Ace-Thred at top.,/p>
-
Adapter, Offset
Ace GlassOffset adapter with outer joint top, inner joint bottom. Some include drip tip.
-
Adapter, Thermocouple Probe, Kilo Scale
Ace GlassAnti-whip, glass adapter for protecting 1/4in OD probes within kilo scale reactors. Complete unit consists of a heavy, glass sheath topped with a 45/50 standard taper joint with a #25 Ace-Thred, one #25 nylon bushing with a #7 Ace-Thred tap and one #7
-
Head, Reaction Flask, 100MM, 4 Neck
Ace GlassReaction flask head, 100mm (4 inch) conical flange, four neck. Center neck in-line with two 24/40 side necks. Third side neck is perpendicular to the in-line necks. Use our 6496 series clamp to secure to flask.
-
Adapter, Tube, Mini #7 Ace-Thred
Ace GlassStraight tube with #7 Ace-Thred at one end for use with 5029 Nylon bushing. O.D. of tube is 12.7 mm, medium wall. Length is approximately 114 mm. Complete includes glass member, 5029-10 Nylon bushing and FETFE O-Ring. For extra O-Rings order 7855-704.
-
Cylindrical vessels with #15 Ace-Thred at both ends, no side port. Use 5838-91 PTFE Adapter with removable filter disc and 5839-04 PTFE Valve with luer extension at either end, see 6404 for listings.
-
Filter Stick, Glassblower Parts
Ace GlassPorous fritted glass filter stick used to fabricate gas dispersion tubes. Measures 10mm O.D. x 20mm long, hollow at one end. Packed 6 per package. Minimum order, one package.
-
Filter Reactor, Plain
Ace GlassSmall volume filter Reactor. Complete item includes: Reactor Body, head (14/20 joints), Clamp, PTFE Bottom Adapter with CAPFE O-Ring, 350 micron polypropylene screen support, 100 micron polyethylene support, 5844 Adapter, 5839-42 Shutoff Valve, 8066-12