Ace Glass Specialty Flasks
-
Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. This style also has a side thermowell port to facilitate a thermometer or a temperature probe to measure flask temperature without losing the pressure integrity of the vess
-
Flask, Pressure, Round Bottom
Ace GlassRound bottom, heavy wall, pressure rated flask. All flasks come complete with a solid PTFE plug seal with front seal FETFE o-ring for better containment of product. Vessels are tested at 1.5x for a working pressure rating at 60PSI at 120°C. Flasks
-
Kriel Reactor, Photochemical
Ace GlassReactor is most useful in prep-scale photolysis and features tapered sides which assures full submersion using our 7825-34 or 7825-36 lamps within the supplied quartz immersion well. A 20% savings in reaction time over round bottom flasks. Additionally
-
Reaction Flask, Cylindrical, Jacketed
Ace GlassCylindrical jackted reaction flask with a 4" (10.2cm), top opening. Jacket inlet/outlets are available with tangentially sealed with 28/15 O-Ring ball joint connections, or with #11 Ace-Threds, for use with 3/8in tubing.
-
Rugged spherical reaction flask with Duran style flat flange with O-Ring groove, for use with 6517 Quick Release Clamp. Various valve and bottom fitting configurations available, see individual listings. each flask includes a CAPFE (PTFE encapsulated silicone) O-Ring. Plain silicon O-Rings are also…
-
Instatherm Reaction Flask and Head
Ace GlassRugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…
-
Scale-Up Series™ jacketed cylindrical flasks with Easy Drain glass valves and KF flange inlet & outlets. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and incorporates…
-
Head, Filter Reactor
Ace GlassReactor head, 60mm o-ring groove flange with (3) in-line 24/40 joints. Use with our 6384, 6386 and 6388 reactor bodies.
-
Round bottom, indented Morton Type, three neck flask. All flasks have angled side necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Reaction Flask, Spherical, Jacketed
Ace GlassSpherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.
-
Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304…
-
Scale-Up Series™ Bench-Top Reactor
Ace GlassAce Glass Scale-Up Series™ plain bench-top reactor base system includes the essential items needed to begin building a customized reactor specifically for your application. Reactors scale-up from 100mL to 6000mL on the bench and their geometry tr
-
Reaction Flask Head, Four Neck
Ace GlassHead with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps.…
-
Reaction Flask, Removable Stopcock
Ace GlassWith 4mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. Stopcock is separated from lower section by 28/15 joint. Neck opening is standard 10.2cm (4"). For joint clamp, order 7669-12. Use 6496 Cl
-
Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Benchtop Reactor, All-in-one
Ace GlassA complete, general purpose benchtop reactor. Self-supported with a 20 x 15in footprint, 33 in high. Reactor features a 100mm (4 in) head with (4) 24/40 joints, an allihn condenser, a pressure equalizing funnel, overhead glass stirring assembly with variable speed motor and controller, heating…
-
Reaction Flask Head, #7 Ace-Thred
Ace GlassHeads with four necks, three inline standard taper joints and one perpendicular #7 Ace-Thred™ thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID…
-
Flask, European Style
Ace GlassEuropean style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…
-
Flask, Reaction, Cylindrical, Jacketed
Ace GlassRugged cylindrical reaction flask with Duran, flat, ground flange and o-ring groove, with water/steam jacket. Jacket inlet/outlets are available with either 35/25 o-ring ball joints (sealed tangentially) or with Ace-Thred connections. For use with 6517 quick release clamp. Flask supplied with one…
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Flask, Three Necks, Jacketed, Heavy Duty
Ace GlassRound bottom flask with three in-line necks. Fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Jacket inlet/outlets are available with either tangentially sealed 28/15 o-ring ball joints or with #11 Ace-Thred connections
-
Jacketed, spherical reaction flask with Duran flat flange and o-ring groove, for use with our 6517 Quick Release clamp. Bottom outlet features an Easy-Action plug controlling the 28/15 o-ring ball joint outlet. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints…
-
-
-
Flask, Reaction, Spherical, Jacketed
Ace GlassRugged spherical jacketed reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). 12L and larger are supplied with reference graduations. Inlet/outlets available with…
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Round bottom, borosilicate flask for NO-AIR and vacuum applications. Ideal for storage or reactions. 0-4mm Hi-Vac valve for precise control of flow. 15mm o-ring joint side arm for connecting to schlenk lines. 7855-726 Fetfe o-ring included.
-
Flask, Single Neck, Pear Shaped
Ace GlassPear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap
-
Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…
-
Flask, Reaction, Spherical, Plain
Ace GlassRugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction heads, see 6528, 6529 or 6530. For…