Reaction Flask

With 4 mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. 4 inch ID conical flange requires Ace product family 6496 clamp for securing the head to the flask.

Conical 4" neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints. Use 6496 Clamp for securing to flasks.

Conical 4" (10.2 cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a thermometer side arm which is internally threaded for use with 5029 Nylon B

Conical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.

Conical 4" neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three socket joints. Use 6496 Clamp for securing to flasks

…surfaces. Plain flat or grooved PTFE gaskets reduce breakage and make an effective seal. Our flat, exclusive FETFE gasket provides a leak-free seal with slight clamp pressure. These are designed especially for use with our conical or flat ground flange style reactor flasks from 500mL up to 4000mL.

…oil baths. The response is raoid and accurate the attention can be directed to contents instead of the pot. supplied with cord. Flask is coated to within approximately 38mm of flange for 200 degree C operation. 360 degree C maximum on special order. Inter- changeable with all ACE reaction tops.

KF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…

This conical 4" neck has three outer joints in line, plus a 14/35 outer joint which takes a 5021 Bushing Adapter to be used with ACE 8315 10/30 Thermometer. The 6500 Thermometer Well can also used with this head, when using a standard thermometer. For

Heads with three necks (inline) that fit our 6504,6511&6516 reaction vessels that feature either a 137 x 100mmID or 168 x 130mmID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges, please see our 6495 product family of gaskets. Note: vessels with o-ring…

Three-neck or four-neck flask top with a flat ground flange for use with cylindrical and spherical flasks having the same ID Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Aluminum construction to connect tops to flasks Wing nuts or thumb screws are spaced to assure uniform compression for sealing the system

Spherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.

Positive, two-piece clamp for securing flat flanges as found on our 6504,6511 & 6516 reaction flasks. Powder coated, high strength aluminum clamp features three brass tilting bolts which will swing freely away from the top piece upon loosening the secu

Cylindrical jackted reaction flask with a 4" (10.2cm), top opening. Jacket inlet/outlets are available with tangentially sealed with 28/15 O-Ring ball joint connections, or with #11 Ace-Threds, for use with 3/8in tubing.

Rugged cylindrical flask with neck opening of 4". Uses 6496 Clamp for securing flask head to flask. For use with 6478 heating mantles.

Rugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea

With 4mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. Stopcock is separated from lower section by 28/15 joint. Neck opening is standard 10.2cm (4"). For joint clamp, order 7669-12. Use 6496 Cl

One-piece clamp for securing flat flanges as found on our 6504,6511 & 6516 reaction kettles. Powder coated, high strength aluminum clamp features three brass, stainless steel spring-loaded lugs with nylon knobs which quickly secure the assembly when pi

Rugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…

Conical 4" (10.2cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a 10/30 joint for a ground joint thermometer. Use 6496 Clamp for securing to f

…standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground…

…thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground…

…heavy-pressed construction Lower sections are mold-blown for maximum resistance to mechanical breakage Offers a broad range of sizes Includes flask and cover; without required clamp and gasket Clamping which is positive and quick-acting; easier to apply and remove than two-piece…

Rugged spherical flask with neck opening of 4" and side indents for improved stirring characteristics. Uses 6496 clamp for securing flask head.

Rugged cylindrical flask with neck opening of 4" with side indents for improved stirring characteristics. Uses 6496 clamp for securing flask head. For use with 6478 heating mantles.

5 neck flat head with flat ground Duran flange. (1) 90 degree center neck, (1) 90 degree side neck, (2) 10 degree side necks, and (1) 45 degree side neck. For clamp, see product family 6517.

Reaction flask head, 100mm (4 inch) conical flange, four neck. Center neck in-line with two 24/40 side necks. Third side neck is perpendicular to the in-line necks. Use our 6496 series clamp to secure to flask.

SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

SYNTHWARE round bottom two neck reaction flask with standard taper outer joints and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

Round bottom borosilicate glass flask with standard taper center neck and a 0-4 Hi-Vac valve for precise control. Flask is ideal for simple NO-AIR and vacuum applications. Outlet arm is 8MM and can be fitted with a rubber septa for insertion of samples or additives via syringe.