Ace Glass Specialty Flasks
-
Benchtop Reactor, All-in-one, Jacketed
Ace Glass1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…
-
Cylindrical, heavy wall reaction flask with flat ground flange. Sides are indented for better mixing of ingredients. Uses 6508 or 6510 clamp style. Fits reaction heads see 6512, 6513 & 6515.
-
With three necks and PTFE plug (5mm bore on 5000mL, 4mm bore on all other sizes) stopcock outlet. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. For stopcock plugs, see 8224. For heating mantle, see 12039
-
Flask, Tapered wall, Five Neck, Jacketed
Ace GlassFully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.
-
Reaction Flask, Spherical, Jacketed
Ace GlassSpherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.
-
-
Reaction Flask, Cylindrical, Jacketed
Ace GlassCylindrical jackted reaction flask with a 4" (10.2cm), top opening. Jacket inlet/outlets are available with tangentially sealed with 28/15 O-Ring ball joint connections, or with #11 Ace-Threds, for use with 3/8in tubing.
-
Round bottom, borosilicate flask for NO-AIR and vacuum applications. Ideal for storage or reactions. 0-4mm Hi-Vac valve for precise control of flow. 15mm o-ring joint side arm for connecting to schlenk lines. 7855-726 Fetfe o-ring included.
-
Adapter Connecting, Side Outlet, NO-AIR
Ace GlassUsed for converting a single neck round bottom flask to air-free or vacuum applications. Outlet can be either 2mm glass stopcock or a 0-3 inlet valve. Upper and lower joint sizes are the same size. Great for adapting flasks and other components for Schlenk lines.
-
Flask, Reaction, Spherical, Jacketed
Ace GlassRugged spherical jacketed reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). 12L and larger are supplied with reference graduations. Inlet/outlets available with…
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Coupling, Reaction Flask
Ace GlassKF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…
-
Flask, Reaction, Spherical, Plain
Ace GlassRugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction heads, see 6528, 6529 or 6530. For…
-
-
Flask, Single Neck, Flat Bottom
Ace GlassFlat bottom flask featuring a single, short neck with a standard taper outer joint.,/p>
-
Arsine Generator, Guthzelt
Ace GlassDesigned for arsenic analysis by the diethyldithiocarbramate colorimetric method. Meets APHA Standard 104A, ACS/USP, and EPA specifications. All wetted surfaces are borosilicate glass or PTFE clad joints. Code -40 complete unit consists of one 24/40, 125ml erlenmeyer flask, one 24/40 to 12/2…
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Similar to 9844-07 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction…
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.
-
PTFE Reactor, Body Only
Ace GlassAll PTFE reactor body, component of our 6390 PTFE Filter Reactor product family.
-
Head, Filter Reactor
Ace GlassReactor head, 60mm o-ring groove flange with (3) in-line 24/40 joints. Use with our 6384, 6386 and 6388 reactor bodies.
-
Cylindrical pilot plant reactors providing portable, self-contained reaction system for research and production purposes. Systems available in 10L, 30L and 50L plain or jacketed capacities with a variety of domed or flat reaction heads. Ask us to build
-
Flask, European Style
Ace GlassEuropean style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Flask Storage Side Joint
Ace GlassStorage or small reaction flask with standard taper joint on side arm. Can be used in gas applications or vacuum and NO-AIR applications. Available in tube and bulb styles with 0-3 vacuum valve.
-
Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…