Chemglass Lab Clamps, Stands & Supports
-
ChemRxnHub™ Dual Support Stand
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports TWO Reactors side by side from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…
-
Support Rings, with Openings
ChemglassManufactured from steel wire and zinc plated, rings have an opening to permit items such as separatory funnels to be inserted without removing the support ring from the base. Available in three sizes.
-
Keck Clamps
ChemglassMade of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
-
Lattice Support Shelf
ChemglassShelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…
-
Support Rings with Clamp
ChemglassSolid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.
-
-
Stainless Steel LabJacks
ChemglassSupport Jack provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of stainless steel while the support mechanism is made of chrome plated steel.
-
Support Tubes, Stainless Steel
ChemglassThese support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws. Tubes are 1/2" (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of…
-
Support, Chem-Jack, Lattice Mount
ChemglassLab Jack Features: Only support jack on the market that attaches directly to a 1/2" diameter vertical lab frame or lattice rod. Heavy gauge aluminum construction provides excellent rigidity and support. Fabricated to precise tolerances allowing smooth vertical adjustment. …
-
Standard Taper Joint Clamp
ChemglassThe Chemglass standard taper joint clamp is mainly used for supporting flasks, beakers or burettes while conducting experiments. It is made of sturdy PTFE material which ensures durability and long lasting usage. It is color coded for easy identification.
-
Anodized Aluminum LabJacks
ChemglassLaboratory support jacks provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of anodized aluminum while the support mechanism is made of chrome plated steel.
-
Support, Solid Tripod
ChemglassBase is made of cast iron with a baked black finish. Rod is 10mm O.D. x 600mm (24 ". Available in two sizes.
-
Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.
-
Clamps
ChemglassCLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,…
-
Chain Clamp
ChemglassCLAMPS, CHAIN, 12IN EXTENSION, Similar to the CG-9220-01 except has a 12" long arm. Clamp can accommodate up to 6-1/2” (170mm) O.D. respectively. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Grip is vinyl coated. VALVES, CHEM-VAC, HIGH VACUUM, LOW HOLD UP,…
-
Stainless Steel Support Stand
ChemglassFloor style stainless steel support stand made to accept 12 and 22 Liter CG-1539 half jacketed flasks. Stand is 67in overall height with a depth of 22in. Ring has a diameter of 8 1/2in I.D. and is 28in above floor level. Top of stand has a 39in reinforced riser to support overhead stirrers, clamps etc.
-
Clamps, PTFE, Standard Taper Joints
ChemglassPTFE molded clamps with a steel core can withstand temperatures up to 250° C and are totally chemically resistant and inert.
-
S.S. Clamps, ChemRxnHub™ Reactors
ChemglassReplacement S.S. reactor clamps for ChemRxnHub™ support stands.
-
Horseshoe Style Clamps
ChemglassHorseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant green epoxy coating. Three adjustable tension locking screws assure even clamping pressure.
-
Clamps, Sanitary, Heavy Duty, Single Pin
ChemglassSingle pin style heavy duty sanitary clamp made from 304 stainless steel. For use with our sanitary adapters.
-
Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap® metering plug.
-
Nylon Tubing Clamp Kit
ChemglassA great way to be prepared for your next clamping situation! Kit contains 5 each, of all 13 sizes, neatly organized in a polypropylene box with adjustable dividers.
-
PTFE Support Rings
ChemglassPTFE support ring used to support round bottom flasks or cylindrical reaction vessels.
-
Support Base
ChemglassSUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece…
-
Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.
-
Flask Support Ring, Rubber
ChemglassFlask support ring has a concave recess on top to support round bottom flasks from 250 to 500mL. 5-1/8" diameter.
-
Pinch Clamps, Stainless Steel
ChemglassMade entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.
-
Support ring is constructed of 1/2" OD. PTFE coated stainless steel rod. Made with an opening for easy insertion of reactor with an 8in long rod for connection to lattice.
-
Optional items are an 8” x 8” extension plate and a 18” high vertical support rod. PLEASE NOTE: ROD IS REQUIRED FOR ATTACHMENT OF EXTENSION PLATE.
-
Similar to CG-141 but with the entire clamp PTFE coated for chemical durability.
-
Similar to CG-1947, support clamp is designed to fit just below the flange of all Chemglass Reactors and permits Reactor lid to be detached without removing the Reactor body from the support clamp. Improved clamp is hinged on one side to swing open and allow complete access to install/remove…
-
ChemRxnHub™ Triple Support Stand
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports THREE Reactors side by side from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…