Allihn style reflux condenser with a plain tubulation at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Similar to CG-1210 but with the 24/40 outer joint replaced with a serrated hose connection for use with a drying tube. This style condenser is used primarily in Soxhlet extractions or in reflux mode. Hose connections have an O.D. of 10mm at the middle serration.

High efficiency reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE:…

Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads.

Condenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

REACTION VESSEL LIDS, 4-NECKS, 50ML, EQUIVALENT TO METTLER EASYMAX, Reaction Vessel Lid, 4-Nk, 50mL, Compatible with Mettler Systems: (1) 14/20 SN, (1) GL-14 SN, (1) 10/18 SN and (1) 10/10 SN; Equivalent to Mettler Easymax® Part # 51161032Mettler Easymax® is a registered trademark of…

Coil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Jacket has a O.D. of 41mm while the coil O.D. is 8mm.…

For use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.

This unique design combines some of the best features for refluxing in a single condenser. Coolant, introduced into the upper hose connection, fills a large cold finger that is wrapped with coils. After the coolant travels through the coils, it enters the water jacket to maximize cooling surface…

High efficiency double coil condenser, similar to a rotary evaporator condenser but with 45/50 joints. Condenser has an O.D. of 80mm and is 400mm overall length. Coolant connections are made using removable hose connections with GL-14 threads. Supplied complete with two polypropylene hose…

Condenser for use in refluxing from 1 to 20mL of solvent in flasks having a capacity of 5 to 50mL. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Top hose connection…

Unique one-piece distilling condenser is actually a 75° adapter, highly efficient coil condenser and vacuum adapter in a compact one-piece unit. Available with a choice of three sizes of condensers with uptake inner joint as listed. Top thermometer joint is a 10/30 outer for use with a 3in…

Reflux condenser having an internal coil that is water jacketed. Vapors are condensed both on the coil and the inner wall of the jacket. The top end has a standard taper outer joint and the lower end has an inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Condenser has a top standard taper outer and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Condenser has a specially formed spiral inner tube providing a long vapor path, ensuring good heat transfer and anti-flooding characteristics. Condenser has a standard taper outer joint at a 15° angle to the condenser and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at…

Vapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose…

Narrow annular space between jacket and inner tube of the West condenser provides for excellent cooling efficiency due to the increased flow rate of water. Condenser has a top standard taper outer joint and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Double coil condenser for use with rotary evaporators for cooling with tap water in a diagonal position. Condenser has a 50mm O.D. flange at the bottom, a 19/38 top valve, and removable hose connections using GL-14 glass threads. Condenser is supplied complete with plastic caps and serrated hose connections.

Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Small scale Liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Compact high efficiency reflux condenser employs a double wall thimble shape bulb sealed into the outer jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. While the overall height of this condenser is only…

Similar to CG-1213, but having a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Jacket has an O.D. of 41mm while the coil O.D. is 8mm. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and…

Allihn style reflux condenser similar to CG-1206 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete…

Condenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has a lower inner drip tip joint and hose connections with an O.D. of 10mm at the middle serration. NOTE: See CG-4519 For Solvent Recovery Traps used with Rotary Evaporators.

Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 45/40 lower inner drip joint, a 19/38 stopcock plug, and removable hose connections using GL-14 threads. Condenser is supplied complete with PTFE centering ring along with plastic caps and serrated hose…

Coil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Connections are GL14 polypropylene hose barbs and screw…

Coil style reflux condenser with a large diameter jacket and coil, similar to CG-1213-L but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Supplied complete with two GL open…

LIDS, REACTORS, 6-NECK FOR 57MM OD REACTION VESSEL BODY, EQUIVALENT TO METTLER EASYMAX, Reaction Vessel Lid, 6-Nk, for 57mm OD Reactor Body: 14/20 Outer CN, (3) 14/20 Outer SN's, and (2) 10/18 Outer SN's; Equivalent to Mettler  Easymax® Part # 51161619Mettler Easymax® is a…

Friedrichs condenser similar to CG-1210 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two…

Molded inner cold finger for use in fabrication of Friedrich style condensers. Overall length is 230mm with an outside diameter of 45mm. NOTE: TOP IS UNFINISHED.

Two piece cold trap style condenser for use with rotary evaporators. Condenser has an additional 19/38 outer joint sealed onto the condenser to allow continuous feed of volumes exceeding the capacity of the evaporating flask.

Static Waterless Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint and GPI thread on side for filling the condenser with ethylene glycol. Supplied with open top cap and septa for closing off once the condenser is filled. No issues with…