Lattice

Compare Tool

Select up to 3 products

Lattice
1 - 32 of 52
Sort
View
Show
  • Support Foot for Lattice Rods

    Bal Supply

    The support feet are of non-ferrous alloy, two inches in diameter, 16mm high, with set screw for fastening lattice frame rods. Provided without mounting screws. Foot has four holes for attaching to bench, floor or wall.

  • Back Mount Lab-Frame Kits for Fume Hoods

    Lee Engineering

    Frame Measures: 36" x 38" Chamfered Ends Rods are corrosion-resistant

  • Table Top Mount Lab-Frame Kits for Fume Hoods

    Lee Engineering

    Frame Measures: 36" x 38" x 9" Chamfered Ends Rods are corrosion-resistant

  • Lattice Lab System, Set #3

    United Scientific Supplies

    This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long including 10 rods that are 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast…

  • Aluminum Lab Frame Lattice Rods

    Lee Engineering

    L12R-4A : 1/2" X 4" Rod L12R-12A: 1/2" X 12" Rod L12R-24A: 1/2" X 24" Rod L12R-36A: 1/2" X 36" Rod L12R-48A: 1/2" X 48" Rod L12R-72A: 1/2" X 72" Rod L12R-84A: 1/2" X 84" Rod L12R-60A: 1/2" X…

  • Lattice Mount

    Harvard Apparatus

    Of glass-filled nylon For mounting a lattice rod parallel to a surface: to floor, shelf, wall, etc. Open-sided connector has base with two countersunk screw holes Takes any rod up to 1/2” (13 mm) Rod is held in place by thumbscrew; without rod

  • Support, Chem-Jack, Lattice Mount

    Chemglass

    Lab Jack Features: Only support jack on the market that attaches directly to a 1/2" diameter vertical lab frame or lattice rod. Heavy gauge aluminum construction provides excellent rigidity and support. Fabricated to precise tolerances allowing smooth vertical adjustment. …

  • Lattice Connectors

    Bal Supply

    These slotted lattice connectors are made of cast aluminum with a smooth round surface for connecting lattice rod supports for laboratory apparatus. These spherical designed connectors assure rigidity, solidity and freedom from breakage. The U-shaped slots on each side take standard ½ inch rod and…

  • Clamp, Lattice

    Harvard Apparatus

    Of glass-filled nylon Has two open sides which take (and lock in place, at right angles) rods up to 1/2” (13mm) diameter Locking screws are M5 (5 mm) thread Allen set screws 1/2” (13 mm) long; without rod

  • Lattice Lab System, Set #2

    United Scientific Supplies

    This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

  • Scienceware® Lattice Support Stand

    Bel-Art - SP Scienceware

    Expand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…

  • Stronghold Scaffold Frame Kits

    Harvard Apparatus

    For mounting apparatus on the laboratory table, wall or floor Provide a basic lattice structure with individual lattices approximately 500 x 300 mm Kits consist of various lengths of stainless steel rods (13 mm diameter), glass-filled Nylon connectors, stainless steel socket screws and one…

  • Side & Bottom Lab-Frame Kits for Fume Hoods

    Lee Engineering

    4' Frame Measures: 36" x 38" 6' Frame Measures: 36" x 62" 8' Frame Measures: 36" x 86" Chamfered Ends Rods are corrosion-resistant

  • Lattice Lab System, Set #4

    United Scientific Supplies

    This Lattice Lab System features an assortment of aluminum rods frup to 72" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

  • Zinc Vertical Base Plate

    Lee Engineering

    Vertical anchoring of (1/2") lattice frame.

  • Stronghold Lattice Frame Mounting Kits, 78 X 39 (2000 mm X 1000 Mm)

    Harvard Apparatus

    …3 rods, 78” long, 24 lattice clamps, 6 lattice bases, 3 male/female hinged adapters and 1 Allen wrench 8846F16 Wall Mounting Kit includes 6 rods, 6” long, 3 rods, 10” long, 7 rods, 39” long, 3 rods, 78” long, 24 lattice clamps, 9 lattice bodies, 6 tee connectors, 3…

  • Lattice Lab System Components

    United Scientific Supplies

    Components from Lattice Lab Sets are available individually so sets can be expanded to accommodate customized needs.

  • Stainless Steel Closed Lab Rod Connector

    Lee Engineering

    Accommodates (1/2") rod. Locked with 14"-20 hex screws.

  • Lattice Lab System, Set #1

    United Scientific Supplies

    …portable 24 x 24" lattice. Assemble it using the two 18" support rods with 2" support rods and the foot plates to form a secure base. More 2" rods and two 24" rods form a strong angle brace to maintain the lattice upright. Contents: …

  • Lab Lattice Base

    Harvard Apparatus

      Of glass-filled Nylon 2 1/2-inch-diameter base has three recessed screw holes for mounting on floor, top, etc. Female socket takes rod up to 1/2 inch (13 mm) and mounts it at right angles to surface Without rod; rod locked in place by thumbscrew.

  • Connector, T-Type

    Harvard Apparatus

    Made of glass-filled nylon For mounting clamps and adapters that have a male connector to vertical lattice rods or laboratory stands One end has open side to clamp rod up to 1/2” (13 mm) diameter and lock with thumbscrew. Opposite end has female socket 3/4” (19 mm) deep that…

  • Lattice Support Shelf

    Chemglass

    Shelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…

  • Zinc Lattice Connectors

    Lee Engineering

    Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous…

  • Stronghold Lattice Rods

    Harvard Apparatus

    CLEARANCE SALE! Original Price: $16 Of polished, chemically resistant, SAE T304 stainless steel Have surface hardness that does not score from clamp binding screws Rods are 1/2” (13 mm) diameter and hollow to reduce weight Walls are 1/16” thick and…

  • Fiberglass Lab Frame Lattice Rod

    Lee Engineering

    Thomas No. 1177N97: 1/2" X 4" Rod Thomas No. 1177N98 : 1/2" X 12" Rod Thomas No. 1177N99: 1/2" X 24" Rod Thomas No. 1177P00: 1/2" X 36" Rod Thomas No. 1177P01: 1/2" X 48" Rod Thomas No. 1177P02: 1/2" X 72" Rod …

  • Aluminum Quick Action Lattice Connector

    Lee Engineering

    Joins 1/2" Rod frames Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm

  • Stainless Steel Lab Frame Lattice Rods

    Lee Engineering

    Thomas No. 1177P04: 1/2" X 4" Rod Thomas No. 1177P05 : 1/2" X 12" Rod Thomas No. 1177P06 : 1/2" X 24" Rod Thomas No. 1177P07 : 1/2" X 36" Rod Thomas No. 1177P08 : 1/2" X 48" Rod Thomas No. 1177P09: 1/2" X…

  • "Mullite (lattice spacing, other parameters)"

    MilliporeSigma

    Reference Material Synonym(s): Mullite MDL Number: MFCD00077645

  • Stainless Steel Vertical Base Plate

    Lee Engineering

    For anchoring of 1/2" lattice frame.

  • Open Lab Rod Connector for Lab Frame Assemblies

    Lee Engineering

    Joins rod frames in different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 14"-20 hex screws. Stainless steel. Handle…

  • Stainless Steel Vertical Base Plate

    Lee Engineering

    1/2" diameter rod can swing on one plane 22 1/2 degrees in each direction

  • Zinc Swivel Base Plate

    Lee Engineering

    1/2" diameter rod can swing in one plane 22 1/2 degrees in each direction.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.