Chemglass
-
Reaction Vessels, Spherical, Morton Type
ChemglassSpherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel…
-
9mm Bonded Closures
ChemglassBonded closures feature clear PTFE/Silicone liner bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Closures are available in both pre-slit and non-slit designs.
-
Preassembled 9mm Thread Caps
ChemglassPre-assembled closure and septa minimize contamination from handling. They are convenient and available in a variety of colors with your choice of septa.
-
Banana Shape PTFE Stirrer Blades
ChemglassBlade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
-
Quartz Ground and Polished Discs
ChemglassCommercial quality ground and polished clear fused quartz discs. Edges have a ground finished on all sizes.
-
-
Features: Dry Running Mechanical Seal Rotates with the Shaft providing for a Vacuum and Pressure Tight Seal Maximum Vacuum Rating is 5 Torr, Maximum Pressure is 2-3 PSI. Unlike Conventional PTFE Bearings, Bearing will Not “Flake” Contaminating Your Reaction. All…
-
Keck Clamps
ChemglassMade of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
-
Tubes, Screw Thread, GL
ChemglassScrew thread tube for replacement on apparatus using the GL thread, which is manufactured to I.S.O. specifications. (GL is the I.S.O. designation for GLASS.) To be used with a CG-196 solid cap with liner or a CG-195 cap with aperture and CG-197 silicone sealing ring.
-
Seals Multiple Vessels Effectively Wide Range of Vessel Sizes Provides Syringe Access to all Vessels Works at Boiling Point Glove Box and Automation Friendly Uses Existing Hot Plate Stirrers Works with Aggressive Solvents The OPTIBLOCK is a simple, easy to use tool for…
-
This fluid driven Spray Ball gives nearly 360° spray coverage and is a convenient way to clean Chemglass 10 thru 100L glass reactors without dismantling the entire setup. It can also be used as a wall wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
FLASKS, FERNBACH, 2800ML, WITH 6 BAFFLES, 2800mL flask with 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to help oxygen transfer to the culture medium. FLASKS, SHAKE, NO BAFFLES, DELONG NECK, WITH STAINLESS STEEL CLOSURES, Non-baffled flasks…
-
Thermometer Magnifier
ChemglassThermometer magnifier allows for precise readings of any thermometer from 5 to 9mm OD. The hide a line feature eliminated parallax and magnifies up to 2-1/2 times. Magnifier slides up and down the thermometer. Celcon® compression cap with listed hole size for Chem-Threads.
-
Neoprene Filter Adapters
ChemglassNeoprene filter adapters are designed to fit between a filtering funnel and a flask. For use with Buchner funnels, Gooch crucibles, filter tubes, etc. Can be used individually or nested with adjacent sizes. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing…
-
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
-
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
-
O-Ring Style Vacuum Traps
ChemglassSimilar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…
-
Preassembled GPI 10-425 Septa Caps
ChemglassPre-assembled closure and septa minimize contamination from handling.
-
-
Used to purify and transfer solvents under inert conditions. Permits transfer of solvents directly into an evacuated storage vessel with 24/40 standard taper outer joints. A 0-4mm Chem-Vac™ Chem-Cap® valve is used for vacuum control.
-
PTFE Bottles
ChemglassIsostatically molded in pure, FDA approved, PTFE. Heavy wall construction with super smooth internal finish. Screw cap housing for leak-free performance Suitable for low temperature applications. Hand grips for ease of manipulation Use up to 280°C (540°F). Totally…
-
9mm Thread Bonded Open Hole Caps
ChemglassBonded closures feature a red rubber liner bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout.
-
Similar to CG-141 but with the entire clamp PTFE coated for chemical durability.
-
Heavy Duty PTFE 19mm Stirrer Blades
ChemglassStirrer blade made of 3/16" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 19mm OD.
-
NMR Tube Cleaner, 5-Position
ChemglassAll glass and PTFE design cleans five NMR tubes of the same, or various, lengths and diameters. PTFE adapter has five positions with flexible 1/8 " PTFE tubing supplied in 9 " lengths that can be cut to desired height. The NMR tube is placed over the tubing and seats in the adapter,…
-
T-Bore PTFE Plug Stopcocks
ChemglassA 1:5 taper PTFE stopcock with three stems sealed 90º apart. PTFE plug has a "T" shaped bore to connect any two or all three stems.
-
Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large permanent white letters make the capacity clearly visible. Flasks are calibrated "To Contain" at Class A tolerances, per ASTM E288…
-
Bubbler, Airfree®, Schlenk
ChemglassUsed to monitor gas flow to reactions while providing a vent to the atmosphere. Reservoir head prevents oil from being sucked back into the system. Volume below the sidearm is approx 40mL. Bubbler has an 8mm OD top and side tubulations.
-
Heavy Wall Vacuum Tubing, Excelon
ChemglassFeatures: Equivalent to Tygon® R3603, Nalgene™ 180 Excellent alternative to latex More cost-effective than silicone Inner bore prevents any build-up Withstands autoclaving gamma sterilization Durometer hardness (shore A): 55 Temperature range: -58°F to…
-
Universal Stirrer Shaft Coupling
ChemglassUniversal Stirrer Shaft Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench. …
-
PTFE Valves
ChemglassVALVES, IN-LINE, PTFE TIP, Hi-vac valve with bent arms to minimize hold up of fluids that would occur in conventional valves. Designed with a precision external thread for fine control. VALVES, 3-WAY, PTFE TIP, Hi-vac valve with three way configuration for use in construction of manifolds,…
-
Round bottom 2-neck flask having standard taper outer joints, both being of the same size. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve. Side neck can be fitted with a CG-3022 septum…