Flask Ring

Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

Ring stand consists of enameled steel support base with zinc-plated steel rod (8835B50 series) and 8091C20 series rings of zinc-plated steel with aluminum screw clamp Ring Stands include one each 64, 89, 114 mm rings Ring Stand Listings indicate base dimensions and rod height

Laboratory cork ring stand for round-bottom flask.

Flask support ring has a concave recess on top to support round bottom flasks from 250 to 500mL. 5-1/8" diameter.

These 22L PYREX(r) round bottom boiling flasks have short ring necks and take a No. 14 rubber stopper. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering and…

Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.

Flask has a #15 o-ring joint on the sidearm and a Chem-Vac™; Chem-Cap®; valve to control gas or liquid flow into the vessel. All sizes are of heavy wall construction, and are used with AF-0060 and AF-0061 manifolds or any other Airfree® component with a #15 o-ring joint. Supplied…

Storage Flask, #15 O-ring Joint Capacity: 250, 500 and 1000mL available Valve Size: 0-4 or 0-8mm available Approximate Height: 160, 1960, and 220mm available.

Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304 have…

Designed by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is transferred…

Round bottom, borosilicate flask for NO-AIR and vacuum applications. Ideal for storage or reactions. 0-4mm Hi-Vac valve for precise control of flow. 15mm o-ring joint side arm for connecting to schlenk lines. 7855-726 Fetfe o-ring included.

Reversible; can also be stacked upon each other. Three sizes provide six different diameters for round-bottom flasks ranging from 50 to 6,000 mL. Excellent adhesion to glass prevents slippage and also offers thermal and electrical insulation. Available in two rubber types.Black natural rubber -…

Reversible; can also be stacked upon each other. Three sizes provide six different diameters for round-bottom flasks ranging from 50 to 6,000 mL. Excellent adhesion to glass prevents slippage and also offers thermal and electrical insulation. Available in two rubber types.

…compressed cork, these rings are designed to support round bottom flasks, beakers, dishes and more. Cork is naturally elastic with very low thermal and electrical conductivity properties. Small cork stand has a diameter of 100mm and holds 250ml to 2000ml round bottom flasks. Large cork stand has a…

Manufactured from Type 1, Class A, Borosilicate and ideal for all culture and media preparation/storage purposes Supplied with GL45 blue polypropylene linerless screw caps and pouring rings and graduated to approximate volumes

Angled head for scrubbing around bends Plastic handle has no ring Bend to fit difficult-to-clean glassware tabulation and curves Bristle Diameter: 1.5, Total Length: 16"

Flask clamp holds 300mL Erlenmeyer flasks For use with MaxQ universal shaker platforms (sold separately) Stainless steel construction, with retaining rings One spot count Includes one clamp

Clamp holds 2.8L Fernbach flask For use with MaxQ universal shaker platforms (sold separately) Stainless steel construction, with retaining rings One spot count Includes one clamp

A range of accessories are available for use with Spinner Flasks.  Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with O₂, temperature, pH…

Schlenk style flask for vacuum, NO-AIR or gas applications. Can be used for storage or reactions. Top is either a no.15 o-ring or outer standard taper joints. Side arm has either a 0-3 inlet valve or a 2mm or a 4mm glass stopcock.

Heads with three necks (inline) that fit our 6504,6511&6516 reaction vessels that feature either a 137 x 100mmID or 168 x 130mmID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges, please see our 6495 product family of gaskets. Note: vessels with o-ring…

…media preparation and long-term storage. The standard erlenmeyer flasks have permanent, white enamel graduations for volume measurement and a white identification box for marking or coding. hybex™ Erlenmeyer Flasks are manufactured from high quality, borosilicate 3.3 glass. A low…

…methods and eliminates cumbersome and dangerous oil baths. Response is rapid and accurate. Supplied with silicone coating for insulation and protection. Contacts are standard banana plugs. Use with 9698-16 connecting cord. CAPFE O-ring supplied with flask. Flask coated within approx. 38mm of flange.

Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.

Round-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…

Head with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For…

Heads with four necks, three inline standard taper joints and one perpendicular #7 Ace-Thred™ thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID…

Complete, one-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…