Ideal uses for beakers, Erlenmeyer flasks, test-tubes, boiling (Florence) flasks, burettes. For securing the clamp to a frame or other apparatus an additional holder (sold separately) will be needed. Please see recommended Boss Head list. The screw adjustment allows for precise pressure when…

HIGH QUALITY Rod made of high quality steel STABILITY   Provides superb stability for experiments & setups THREADED Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES The durable and sturdy construction of this set makes it an…

This scissor jack is crafted of the highest quality materials and is built to last. It has a total weight of about 1.2 lbs. (540 g) and opens to a maximum height of 6". It has a Dynamic Load of 2kg and static strength of 15kg. Also available in 6.5"x5" platform size (SSJCT20) and…

These stainless steel, corrosion resistant clamps use strong spring closed forced jaw designed for securing standard taper joints.

Made from high grade Zinc Alloy, finished in a non-toxic powder coating. Two wide pad metal screws make it easier to securely fasten the bosshead to the support apparatus and clamp. Able to hold rods up to 16 mm in diameter. Holds rods orthogonal (90 degrees) to one another. Eisco Labs proudly…

These steel rings are intended to suspend flasks on a support stand. We offer multiple sizes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause cancer, birth defects, or other reproductive…

INDUSTRIAL QUALITY High performance, aluminum rod, suitable for use on a lathe or as part of any laboratory retort setup STABILITY Rod features solid construction for stability ROUND SHAFT Rod features unthreaded, round shaft ends GREAT FOR CLASSROOM & HOME LABORATORIES An…

0209X58: Tubing Holder for Beakers This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to 1/4" thick. 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (3/8") O.D. Autoclavable …

Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

A Standard Taper clamp made of corrosion-free stainless spring wire.

Aluminum alloy clamp Metal clamping screws Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die casted alloy with a powder coat finish. It accepts rods at a right angle to one another. Metal thumbscrews allow for adjustment.  

HIGH QUALITY Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a rod made of stainless steel STABILITY providing superb stability for experiments & setups TAPPED HOLE AND THREADED ROD Base features a tapped…

Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

Steel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels.

Laboratory support jacks provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of anodized aluminum while the support mechanism is made of chrome plated steel.

Clamp Universal, Cork lined Durable, premium stainless steel construction convenient tommy bar style thumbscrew for easy and secure tightening 100mm jaw capacity Cork lined jaws provide a stable hold 11" total clamp length High quality, durable 3 prong clamp with…

Ai stainless steel laboratory scissor jacks with cushion feet.

Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…

These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.

OHAUS hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76 mm (3") high, small turntable accommodates 100 mm petri dishes. It has…

This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long including 10 rods that are 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast…

Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous…

Stainless steel spring used to connect apparatus having hooks. All springs have an enlarged 1/4" ID loop at each end for easy connection to almost any size hook. Diameter of the coils on all sizes is 0.190". Length listed is the length between the loops.

Designed to safely and conveniently secure compressed gas cylinders in an upright position. Accommodates cylinders 4-1/2" to 11" (114mm to 279mm) in diameter. The heavy-duty clamp with adjustable thumbscrews fits conveniently on any bench up to 2" (51mm) thick without marring the surface.

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

Model 712 is a rugged cast aluminum clamp that safety secures gas cylinders to benches, tables, or other flat surfaces up to 2.5" (64mm) thick. The 1" (25mm) wide, 54" (1372mm) long nylon strap features a nickel-plated, non-slip spring catch and buckle for easy adjustment around…

SUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece…

Distance from center of ring to center of clamp: 4-1/4" (108mm). Plated. Attaches to support rods up to 3/4" (19mm) in diameter.

3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glassware Accommodates objects up to 2.5" Adjustable thumb screws on both sides allows for a wider range of accommodation Non-slip vinyl coated rubber prongs…

SIBATA 47mm Filtration Filter Holder Components are available as replacement components, or to create a customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean…

These PTFE/Viton® couplings provide an inert and greaseless connection for equipment with beaded fittings. Their unique design eliminates pressure points which cause glassware to break. Use with LG-4553 and LG-4558 beaded ends.