eXtra Dense Bonding (XDB) is key to the exceptional performance of ZORBAX Eclipse XDB columns at intermediate pH. This dense bonding is accomplished by adding an extra-dense monolayer of C18, C8, phenyl, or CN-silane to the ultra-pure, fully-hydroxylated, ZORBAX Rx-silica surface. The packing is…

Agilent J&W DB-5ms Ultra Inert columns deliver industry-leading analytical performance in a range of chromatographic applications. DB-5ms Ultra Inert is low bleed and features excellent signal-to-noise ratio and symmetric peak shapes, enabling high performance for challenging active analytes such…

Agilent Microsorb is the stationary phase of choice if your ultimate goal is preparative liquid chromatography. The Microsorb column line is made up of eight different phases to address all your application needs. Four particle sizes are available which offer even more flexibility in preparative…

Bond Elut 96 round-well plates enable straightforward, rapid conversion from cartridge-based methods to the automation-friendly 96-well format. 96 round-well plates are available in various silica-based and polymeric sorbents. These plates are well suited to smaller sample volumes. Bond Elut 96…

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

J&W DB-5ms is a non-polar phenyl arylene polymer gas chromatography (GC) Column, virtually equivalent to (5%-phenyl)-methylpolysiloxane, featuring an excellent signal-to-noise ratio for analytical applications. This improved performance gives better sensitivity and mass spectral integrity, and…

Agilent Bio SEC-5 HPLC columns are packed with 5 µm silica particles coated with a proprietary, neutral, hydrophilic layer for maximum efficiency and stability. Our specially designed packing also promotes high pore volume, improving both peak capacity and resolution. Agilent Bio SEC-5 HPLC columns…

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W…

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W…

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and…

The VersaPlate allows you to process more samples in less time with less waste. In its 96-well format, tubes are removable, making this system simpler to use and far more flexible than conventional 96-well formats. You can customize the configuration to different numbers of samples. This product…

Ligand on 100 Angstrom silica Thermo Scientific Betasil C18 Columns feature high surface area with high bonded phase coverage.

Dispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…

Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking,…

Agilent J&W PoraPLOT Q is recommended for column switching systems that analyze polar and apolar volatile compounds. Water elutes as a sharp and quantifiable peak, making retention times of target compounds repeatable, as they are not influenced by water in the sample. This product is only…

PLgel Preparative GPC columns are used to seperate molecular weight fractions of organic soluble mixtures. Preparative GPC columns can be used to isolate plasticizers, triglycerides, oligomers, and molecular weight cuts for synthesis or analysis. The PLgel EnviroPrep line complies with EPA Method…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent J&W DB-5 is nonpolar and low bleed, and is available in a range of column dimensions. DB-5 is also bonded, crosslinked, and solvent-rinsable, and has a high temperature limit. It is equivalent to USP phase G27. The DB-5 column is tested with the tightest industry QC specifications for…

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and…

Agilent J&W HP-5ms Ultra Inert is a (5%-phenyl)-methylpolysiloxane specifically tested for inertness in the analysis of active compounds, including acidic and basic compounds, to meet the growing need for lower detection levels. With very low bleed characteristics, this bonded and crosslinked…

The ZORBAX column family is one of the most popular high-performance liquid chromatography (HPLC) column families for reversed-phase HPLC. ZORBAX columns are based on traditional fully porous particles and offer the highest loading capacity and resolution. From Eclipse Plus, Eclipse XDB,…

5% Phenyl / 95% Dimethyl Polysiloxane Excellent general purpose GC column Low bleed Non-polar High temperature Application Areas: Aromatics, pesticides, herbicides, drugs of abuse, hydrocarbons, GC/MS applications Operating Temperatures: 0.25-1.5µm…

Agilent J&W CP-Wax 52 CB is a high-polarity polyethylene glycol (PEG) phase with a wider temperature range than nonbonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature…

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to…

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and…

Legal Information: Nucleosil is a registered trademark of Macherey-Nagel GmbH & Co. KG

The choice of columns for analysis of difficult compounds by HPLC YMC-Pack Pro C18 columns start with a tightly controlled, highly purified silica gel, followed by a high-coverage C18 bonding and finish with a unique endcapping procedure utilizing Lewis acid-Lewis base chemistry. 2 µm particle size…

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to…

Mixed-mode strong anion exchange columns for acidic analyte extraction High surface area and capacity ensure highly reliable retention characteristics No secondary interactions from silanol groups for accurate results Higher sample loading due to high surface area Recover clean…

Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (biological fluids, water) Polymerically bonded, octadecyl (18 %C), endcapped Higher 18 %C loading for increased binding capacities and higher recoveries The least selective phase: retains most…