Ai stainless steel laboratory scissor jacks with cushion feet.

These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

All stainless steel screw mechanism and anodized aluminum top and bottom plates.

Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest…

Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

This scissor jack is crafted of the highest quality materials and is built to last. It has a total weight of about 1.2 lbs. (540 g) and opens to a maximum height of 6". It has a Dynamic Load of 2kg and static strength of 15kg. Also available in 6.5"x5" platform size (SSJCT20) and…

Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

Aldrich benchclamp clamps have a nickel-plated finish and are corrosion resistant. The clamps come with slip-on fiberglass finger covers. The Grippy Knob design has a round nut which is easy to turn making tightening the clamps around glassware fast and convenient. Round extension arms allow…

Two prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.

These support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws. Tubes are 1/2" (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of…

Durable stainless steel construction PVC coated jaws Comes with boss head for convenience and versatility in lab setups Thumbscrew allows for easy and secure fitting Overall length in 9.5" Universal 3 pronged clamp with chemical resistant PVC coated jaws. 9.5" Total length with a convenient…

Accommodates (1/2") rod. Locked with 14"-20 hex screws.

Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.

This clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.

Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous…

Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished…

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Rugged stainless steel deck and lift mechanism for long life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing…

These rugged laboratory support jacks provide stable height adjustment for various items in the lab such as flasks, beakers, water baths, and other small equipment. They are constructed of heavy duty aluminum alloy for years of trouble-free performance. The jacks are easy to clean, rust-proof,…

Heavy-Duty Support Stands have a four point cast iron base with stainless steel support rod. They are designed to accommodate vessels up to 12" (30.5 cm) in diameter to sit close to the support rod. They have rubber cushions on each of the four corners. The base area is 16.5" (41.9 cm)…

Strong Aluminum Alloy Fitted with Over-sized knobs Rods supported on 4 inch long surface to avoid vibration and wobble

Shelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…

The Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of…

Cast aluminum clamp with nickel plated steel thumb-screw. The clamps jaws have a range of 3/8" x 1-3/8".

Joint Spring, Stainless Steel, Synthware, Coil Length: 6.35, 25.0 and 32.0mm available.

CLAMPS, CHAIN, 12IN EXTENSION, Similar to the CG-9220-01 except has a 12" long arm. Clamp can accommodate up to 6-1/2” (170mm) O.D. respectively. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Grip is vinyl coated. VALVES, CHEM-VAC, HIGH VACUUM, LOW HOLD UP,…

Exceptional stability and control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of…

FlowLinX Sanitary Clamps are designed for quick and efficient installation.  The innovative clamp design retains the sanitary fittings in the clamp body for effortless one-handed operation.  The audible click of the clamp ensure the connection is secure without over compression…