Thermometer Clamp

Compare Tool

Select up to 3 products

Thermometer Clamp
1 - 32 of 44
Sort
View
Show
  • TraceableLIVE™ WiFi Datalogging Thermometers

    Thomas®

    …Sensor, Quick Start Guide, batteries, magnets, Velcro, wall mount, and Traceable® Certificate. LN2 Monitoring TraceableLIVE® Thermometers Storing and monitoring cryo-needs has never been simpler. LN2 digital liquid nitrogen temperature monitors consistently ensure the vitality…

  • Talboys Support Rod and Clamp Kit

    Troemner

    Designed for holding temperature probes, thermometers or other glass tubes. Includes an 18" (45.7cm) aluminum support rod, thermometer/temperature probe extension clamp, 3-prong medium swivel clamp, and hook connector. Recommended for Professional, Advanced or Basic Hotplates or…

  • Scienceware® Stainless Steel Clamping Thermometer Holder

    Bel-Art Products

    With five hole sizes ranging from 3.5mm to 14.5mm, this holder accommodates various thermometers including liquid in glass, electronic with probe, and bimetal with probe. The stainless steel, spring loaded clip attaches securely to laboratory containers, shelves up to 3/8” thick, and more.…

  • Stronghold Support Glass-Filled Nylon Jaw Clamps

    Harvard Apparatus

    clamps have fixed screw action and open to 5/8” (16 mm), for thermometers, burets, rods, etc. Jaws close down to completely shut. 8847T02 clamp has extension stem 5” x 1/4” diameter (125 mm x 6.4 mm); 8847T04 Clamp has male connector; 8847T06 has ball joint adapter. Medium clamps

  • Thermometer Clamps

    Humboldt

    With a full 360° jaw rotation, this fully adjustable clamp is ideal for attaching to rods up to 3/4" (19mm) in diameter. The clamp has an aluminum muff with steel thumbscrew and phosphor bronze jaws. The maximum distance from the jaw to the muff is 4-3/8" (111mm) and the overall length is 5-1/2"…

  • Labjaws Small Water Bath Clamps

    Troemner

    Suspends 6 to 13 mm thermometers over water bath. C clamp holder fits bath walls up to 9 mm thick. Overall length is 64 mm.

  • Labjaws Thermometer Swivel Clamp

    Troemner

    Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • Labjaws Two-Prong Extension Clamps

    Troemner

    … Single and double adjust Durable, heavy adjust model has one jaw fixed. Ideal for holding straight-sided objects such as burets, thermometers, beakers, etc. Nickel plated finish springs and rivets for long life. Additional clamp holder (2824C83) is required. Extension diameter: 1.27 cm.

  • 17" Support Rod Kit

    Thomas®

    17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"…

  • Thomas Heavy-Duty Stainless Steel Lab-Lifts

    Thomas®

    …stirrers. 17” Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17” vertical support rod to the upper deck of a 6” x 6”,…

  • Model 5160 Cathetometer Complete

    Eberbach

    …and build-in image erecting system, making the unit convenient for reading thermometers, other scales, or printed matter. The telescope is 8" long while closed, and opens up to 10 1/2 ". The draw tube can be clamped firmly to prevent shifting between readings while making focusing easy at…

  • Clips for Beakers and Pitchers

    Bel-Art Products

    …polypropylene surface may be marked with identifying sequence numbers Autoclavable 0209X17: Thermometer Holder for Beakers Easy-to-use, polypropylene clips hold thermometers and probes from 3.2 to 11mm (1/8 to 7/16") in diameter securely in place. Fits onto the rims…

  • Labjaws Thermometer Extension Clamp

    Troemner

    Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Thermometer Clamps

    Humboldt

    Similar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The…

  • Stronghold Support Glassware Buret Clamps

    Harvard Apparatus

    …‘T’ connector; clamps do not obstruct scale. 8847T34 double buret clamp is similar to 8847T32, but with two single buret clamps mounted 4” (100 mm) apart on crossbar to simultaneously hold two burets, tubes, rods, thermometers, etc. 8847T36 clamp is similar to 8847T32 but for…

  • SYNTHWARE Thermometer Clamp

    Kemtech America

    Thermometer Clamp, Synthware, Extension Rod Diameter: 10mm, Overall length: 200mm.

  • LabJaws Clamp, Thermometer End

    Troemner

  • AC/DC 1000A Clamp Meter + IR Thermometer

    Extech

    DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

  • Wall Clamp

    Troemner

    Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

  • Hook Clamp

    Humboldt

    The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).

  • Suspension Clamp

    Troemner

    CLEARANCE SALE! Original Price: $33.94 Holds thermometers, potash bulbs, drying tubes and other apparatus. Suspends item 10 cm from support rod. Integral post clamp accepts up to 21 mm diameter rod. * Sale price valid only on current stock. Additional units may be available…

  • Traceable® XX Long-Probe Waterproof Thermometer

    Thomas®

    …Stainless-steel, spring-loaded clamp, rugged construction  Case size: 4¾ x3 1/3 x1¼  (12.2x8.5x3cm) Weight:  7 oz. (200g) Case:  Waterproof, high-impact, chemical-resistant ABS plastic, withstands chemicals Supplied:  Thermometer, stainless-steel probe, stainless…

  • Electrical Test Kit with AC Clamp Meter

    Extech

    …systems and HVAC equipment Kit includes: EX205T - TrueRMS Autoranging Digital Multimeter with 7 Functions MA430 - MA430 400A AC Clamp Meter with a built-in Non-Contact Voltage Detector Kit is supplied with test leads, batteries, and attractive storage case that provides…

  • 2000A True RMS AC/DC Clamp Meter

    Extech

    …includes AC/DC Voltage and Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode and Continuity Current measurements to 2000A through the clamp and 400mA via test leads Large 4000 count backlit display for high resolution and easy viewing in dimly lit areas Basic DCV accuracy of 1%…

  • Adjustable Band Clamps

    Humboldt

    …Band Clamps provide a unique and efficient clamping mechanism for objects of any shape and size. The same clamp can be used to handle a gallon container or fit snugly to hold a small thermometer, reducing the need to stock numerous clamp sizes and reducing time spent looking for the right clamp to…

  • Single, Softening Point Apparatus Set

    Humboldt

    …apparatus used for single determinations, asphalts, pitches, tars and most resins. Includes burner, beaker, support stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Order Thermometer separately. Meets ASTM D36, E28; AASHTO T53.

  • Single, Softening Point Apparatus Set, Electric

    Humboldt

    …ball method softening point apparatus used for single determinations, asphalts, pitches, tars and most resins. Includes hotplate, beaker, support stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Meets ASTM D36, E28; AASHTO T53.

  • Thomas Aluminum Lab-Lifts

    Thomas®

    …steel. 17” Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17” vertical support rod to the deck of a 6” x 6”, 8” x…

  • Reaction Flask Head, Conical Flange

    Ace Glass

    Conical 4" (10.2cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a 10/30 joint for a ground joint thermometer. Use 6496 Clamp for securing to f

  • Reaction Flask Head

    Ace Glass

    Conical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.

  • Head, Duran Flange

    Ace Glass

    Flat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

  • Head, Duran Flange

    Ace Glass

    Flat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.