Holds rods from 0.089 to 1.6 cm (0.6 in.) diameter.

These support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws. Tubes are 1/2" (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of…

Heavy-duty, top-of-the-line rods provide maximum strength and durability. Constructed of 303 stainless steel.

The Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are milled at right angles and the clamp can be mounted on table edges up to 1-3/4" (45mm) thick. Each jaw can be adjusted separately. Heavy cast…

Lab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole…

Mohr's Pinchcock tubing Clamp is made of steel wire and nickel plated. Available for tubing diameters of 10mm, 13mm, and 16mm.

A zinc plated, stamped steel clamp with steel thumb screws. Will accept rods up to 3/4" in diameter. The distance between the position of the burettes is 7.25".

Screw-Clamp Compressor No-slip jaws Strong, open-jaw type nylon tubing Accepts tubing up to 6.4mm (1/4") O.D. Angled jaws prevent tube from slipping out Swing Jaw™ Tubing Clamps For all fixed tubing Zinc-plated steel clamp provides non-slip closure for flexible…

Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

Stainless Steel Quick Release clamp for use with two-piece Pressure Reaction Flasks and Heads with Duran flanges. Available with or without rod for clamping to support frame. Note: Ensure proper bottom support for your reactor, the clamp is only recommended for stabilization, not support.

Cast iron support stand bases are constructed with black enamel finish for chemical resistance and durability. All bases feature a built-in support rod holder with locking knob that accepts a 0.51" (13 mm) diameter support rod. U-shaped base features three built-in support rod holders and…

Our polypropylene Separatory Funnel Holder accepts support rods between 9.5mm and 12.5mm in diameter. These holders can support separatory funnels as small as 250ml and as large as 2000ml. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not…

Connect this clamp to any support rod and set up to three separate pendulum demonstrations. Includes individual cord clamps.

These aluminum and stainless-steel laboratory jacks provide a helpful platform for use in the lab. We carry two separate jacks with different sized platforms: LBJK150: 150mm (~5.9in.) by 150mm Platform, Maximum Height of 260mm (~10.25in.), Can Hold Up to 25kg (~55lbs) LBJK200: 200mm…

Shelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…

Burner tri-pod with cast iron ring and nickel plated threaded legs. Sold individually.

Useful for mounting stirrers and other general equipment to lab frames. Small physical size takes up very little space. Solid aluminum construction holds items up to 4.3 lbs.

These extension clamps features heavy-duty electroplated zinc alloy construction, dual prong adjustments and addtional fiberglass sleeves. Clamps have a max temperature use of 80°C. CLHD01 - 4" long extension rod is constructed of stainless steel. Prongs open to about 1.75",…

Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

Holds flask and cover together firmly. Three insulated spring-activated clamping arms. Stainless steel springs. For use on reaction kettles.

Support Stand made from a stamped steel with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod …

The Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.

Designed to hold hotplates, stirrers, hotplate-stirrers, and other apparatus to lab-frames or ring stands. Aluminum construction offers strength and durability. Support plates include a non-skid rubber mat and a built-in holder that grips rods up to 0.75" (19 mm) in diameter.

The "Hoffman Type" Electrolytic Support is used with associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base (H-21225) with insulated binding posts, support rod (H-21360), one burette clamp (H-8022),…

Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

FITS 12.5mm RODS Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH Clamps are made of high quality metal with a silver finish EASY TO USE Tighten clamps using an Allen wrench - Avoid overtightening INCLUDED Twelve clamps only - Rods…

The Humboldt Mfg. Co single ring tripod is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures long lasting usage.

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

LabJaws flow control devices offer selection and quality. They are finely machined to deliver accurate regulation or interruption of fluid flow. Every flow control device resists corrosion and rust. Hosecocks offer easy one-hand operation. Convex bearing surfaces and rounded edges protect tubing.…

OHAUS hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76 mm (3") high, small turntable accommodates 100 mm petri dishes. It has…

SUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece…