Ideal for taking samples from low and medium viscosity liquids, the Liquid Master is available in a range of lengths and diameters to give a range of sample volumes. Product Contact Material Available in: 316L Stainless Steel, Food Grade PTFE/FEP, Polypropylene. Available in a large variety…

Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve. PP, transparent Dip sampler, item no. 5315-0200, steplessly extendable from 100 cm to 200 cm All-layer and point sampling possible

The manually-operated drum reels are used to lower dipping bottles and immersion cylinders safely to the required depth in shafts, wells and tanks and then to pull them up again. The manually-operated drum reels can be equipped with various cables or chains. If flammable or highly flammable liquids…

The SteriPlast® Bio sample scoop made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

The SteriWare LiquiThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. If you want to buy a disposable liquid sampler then the LiquiThief is the sampler of choice. The…

Single tube vacuum manifold with #15 o-ring connections on ends. Available in either 3 or 4 port configuration with 0-10 Easy Action stopcocks. Order with either 14/20, 24/40 inner joints or #15 o-ring joints on ports. Distance between ports is 95mm which allows for use of flasks up to 3 Liters.…

The right test for each type of contamination Qualitative and semi-quantitative hygiene control Sterile packed and ready-for-use Easy to handle Rapid results Long shelf-life Used for the non-selective development and enumeration of all aerobic bacteria on surfaces in…

PEEK stator for 4 port low-flow valve (0.4mm bore)

Sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. The scaled sample container can be used for an exact measurement and it shows contents up to 50 ml or 1.5 oz.…

Twelve-inch rim dip net is fitted with a heavy canvas bag approximately 6½" deep Bag attached to metal frame with clamp rings Bottom of bag is a mesh material of approximately 500 micron nylon Canvas skirt extends three inches below bag bottom to protect mesh Aluminum pole…

Biocide free cellulose sponges in a variety of pre-hydrated dilutions for sample collection. Our hydra sponges are pre-moistened for convenience, durable, biocide-free cellulose maintains organism viability. Benefits: Improved consistency Increased accuracy of results Reduced…

This holder accommodates test tubes from 11 to 17 mm diameter.

Pure•SAL™ was developed for the controlled and standardized collection of RNA or protein biomarkers from oral fluid specimens for subsequent stabilization and analysis in life science and research applications. The Pure•SAL™ Oral Specimen Collection Kit provides a simple…

Cross Sectional Bulk Sampler for Cohesive Powders Can be used to take large volume samples of cohesive powders. The sampler can be used horizontally through a sack or else it can be used vertically to take samples from drums, kegs, super sacks etc. Key Features: Manufactured in 316L…

The PerkinElmer microtiter cover mat can be used with both shallow plates as well as deep plates.

Size: 0.50 mm i.d.(orange), 150 cm

The PerkinElmer sample with a volume capacity of 20 uL is made from sturdy stainless steel material and is mainly used in laboratory and manufacturing factories.

Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with…

Glass Coliwasa Samplers are used to collect composite liquid samples from top to bottom in drums, tanks and reservoirs. After a sample has been collected, lower and press lightly on the inner tube, which positively seats the Teflon® seal, locking the sample column into place.

Dipping bottle with glass container for sampling in sewage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants of Hazard Categories IIA and IIB. Completely made from non-spark producing…

Sample Tray for PerkinElmer Series 200 Autosampler. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.

Reduce cross contamination while sampling various powders, granules, and grains Suitable for sampling from all layers of the container, providing an accurate representation of the contents Constructed of chemically inert high-density polyethylene (HDPE) These slot samplers provide highly…

The SteriWare Powder Thief is the ideal choice for taking samples from containers of powder. These disposable devices have become an extremely popular choice due to their simple operation and guarantee of cleanliness. Made from FDA and EC conforming HDPE, these samplers are individually bagged…

To create a more comprehensive profile of our health and wellness vs. disease, multiple analytes need to be included in the analytical mix such as DNA, RNA, proteins, and cell morphology. Unfortunately due to the limitations of current sample collection practices this means multiple samples need to…

The LiquiDip is a fast efficient disposable liquid sampler. It is a self-closing liquid sampler that offers both cross sectional and point sampling. A valve is housed on the base of the sampler. Upon contact with the bottom of a container, the valve will close, locking the liquid inside.…

Diameter: 13 mm

The Mawi DNA Technologies blood collection kit with a capacity of 600 uL is used for the collection, storage and transportation of blood for the laboratory analysis of serum.

Burkle PowderDispo is ideal for taking a cross-sectional sample from within a bulk powder. Length of sample chamber 500mm. (22mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of…

En Core® Sampler is a SINGLE USE device. It cannot be cleaned and/or reused. En Core® Sampler is designed to store soil. Do not use En Core Sampler to store solvent or free product En Core® Sampler must be used with En Core® T-Handle and/or En Core® Extrusion Tool exclusively. (These items…

Q-Swab is a ready-to-use sample collection and delivery device for environmental surface sampling. Money and time are saved by eliminating pipettes and broth preparation required with other sample collection methods. Each of the broths offered in Q-Swab are self-contained, gamma irradiated and held…

Size: 0.50 mm i.d.(orange), 150 cm