Liquid Sampler

Compare Tool

Select up to 3 products

Liquid Sampler
1 - 32 of 129
Sort
View
Show
  • Stainless Dipper

    Sampling Systems

    Ideal for use with a range of liquids. Dippers are quick and easy to use. They are ideal for obtaining a surface sample from a wide range of environments. Sampling Systems™ offer 3 sizes of Stainless dipper. Key Features Manufactured in 316L Stainless Steel Available with 600mm or…

  • Tank Sampler

    Nasco

    …together and lower the unit to the specific depth required (the sampler is marked in 1 ft. (.3 m) increments.) Pull and hold the stainless steel wire at the top, figure A, which opens the valve, figure B, allowing the liquid to flow in. Release the wire allowing the valve to close, figure…

  • Viscous Sampler

    Sampling Systems

    …to suck the product into the sampler. Suitable for medium viscosity materials. Manufactured from 316L Stainless Steel. Operation Insert the sampler into the product. At the required depth pull handle to suck product into the sampler. Remove sampler from the product. Run the…

  • High-density polyethylene bowl with securely welded solid handle Handy for sampling and dispensing corrosive liquids Available in a variety of sizes

  • …want to buy a disposable liquid sampler then the LiquiThief is the sampler of choice. The Disposable LiquiThief is a fast and convenient way of taking of liquid samples. It is essentially a big syringe. The operator pulls up the handle to pull the liquid into the sampler. The further the handle…

  • LiquiSampler

    Bürkle

    LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening…

  • … Stirring Paddle Perforated Mixing Paddle Liquid Sampler Kit (Consists of 1 each below) 1.5' Handle 3' Handle 6' Handle Sampler with Bottle 100 mL Sampler with Bottle 500 mL Complete Liquid Sampling & Stirring Kit (Consists of 1 each above…

  • Sterileware Liquid Thief

    Bel-Art - SP Scienceware

    Available in two lengths to suit your needs, these sterile liquid thieves draw a sample with a simple pull of the handle, then dispense easily into the vessel of your choice. Ideal for sampling water and other low viscosity liquids, oils and ointments; 0.15cm (¹⁄16") tip hole…

  • Dip Samplers

    Bürkle

    Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve. PP, transparent Dip sampler, item no. 5315-0200, steplessly extendable from 100 cm to 200 cm All-layer and point sampling possible

  • Liquid Master

    Sampling Systems

    … Slowly insert the sampler into the product. As the sampler is pushed in a cross-sectional sample is taken. Release the push button at the required depth to stop any more liquid entering the sampler. Remove the sampler. Note: To take a large sample the sampler needs to be inserted…

  • It is possible to carry out point sampling of liquids of varying viscosity with the stainless steel Liquid CupSampler AISI 316L (1.4404). Media-containing particles can also be sampled without difficulty. The sampler can be used in the fields of chemistry, foodstuffs and cosmetics. The cup can…

  • …Pharmaceutical, and Chemical and related industries. Unlike conventional reusable samplers, these single-use products do not need to be cleaned after use, thereby saving time and money. Often, cleaning reusable samplers is demanding and complicated and requires using strongly adhesive or toxic…

  • Scienceware® Liquid Sampler

    Bel-Art - SP Scienceware

    Ideal for viscous liquids, this 50ml (1.65oz) liquid sampler is made for immersion into a can, bottle, tank, vat, etc. Nickel-plated brass cup and tubular handle with finger grips are 45cm (17-1/2") long Center rod with finger ring actuates a valve in the bottom of the cup for…

  • …The sampler is made in a cleanroom so you simply unwrap and use. This is the ideal sampler for creams, pastes, gels and ointments. The single use ViscoThief is a fast and convenient way of taking of samples. It is essentially a big syringe. The operator pulls up the handle to pull the liquid into…

  • The new SteriWare Blue Liquid Funnels from Sampling Systems are ideal for transferring liquids in hygienic applications. The highly visible blue colour of the funnel allows it to be easily identified if left in the product. Key Features: Moulded & packed in a Medical Cleanroom …

  • Cup Sampler

    Sampling Systems

    …Construction Single point liquid sampler Operation: Insert the sampler to the required depth. Squeeze handle which pushes the cup away from the lid allowing the liquid to enter the cap. After filling remove the sampler. To empty the sampler either tip the sampler whilst squeezing…

  • Liquid Sampler

    Dynalon

    …environments and for hard to reach places A 500 mL bottle screws into the end of the 6 foot handle and is filled via four ports (two allowing liquid to enter and two allowing air to escape) Excellent for industrial and environmental applications Handle is 6 foot length by 1-1/4” diameter

  • Drum Samplers

    Dynalon

    …and models with depth capture available  upon request . Drum Sampler 6' 100 mL ( 1212X49 ) Product Dimensions (l x w x h) : 0x1.905x78.062in 6' Handle Drum Sampler. Similar to our Liquid Sampler, but specifically designed for easy, effective sampling of 55 gallon drums…

  • Liquid-Sampler

    Bürkle

    …opened with the thumb to empty the sample. The valve is opened by attaching the sample container to empty the sample. Sampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of the sample bottles. Material AISI 316L (1.4404).

  • …is available for each Lot number. The high density polyethylene product is recyclable depending upon usage. DispoPipette Liquid Sampler for taking Target or All Layer liquid samples of low viscosity of varying volumes. Two different size openings at each end for different viscosities.

  • Ice Sampler

    Sampling Systems

    …sampling hard materials such as frozen product or wax; the ice sampler is equipped with a sharp cutting edge to help it dig into the product. Key Features Single point sampler 316 Stainless Steel Operation As the sampler is pushed into the product, rotate the handle. The scroll…

  • Bellows Samplers

    Bel-Art - SP Scienceware

    Bellows samplers provide quick and easy liquid sampling with one hand operation. FDA grade polyethylene sampler tube Long tapered tip with a 4mm opening

  • Scienceware® Sample Thief

    Bel-Art - SP Scienceware

    …allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic sampler has tapered ends…

  • Bottle Sampler

    Sampling Systems

    …Construction Single point liquid sampler Operation: Insert the sampler to the required depth. Squeeze handle which pushes the cup away from the lid allowing the liquid to enter the cap. After filling remove the sampler. To empty the sampler either tip the sampler whilst squeezing…

  • Tray main cable assembly, used with series 7693 automatic liquid sampler systems, model 7693A.

  • OilExpress ™ 4 system delivers highly automated, rapid, reliable oil condition monitoring results using recognized industry standard protocols such as ASTM ® , JOAP and Caterpillar ® S•O•S ? . We offer a range of solutions for fast and accurate IR analysis of in-service lubricants based on the…

  • Allows collection from different angles, including 90° Samples liquids, powder or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing…

  • In-Stream Sampler

    Sampling Systems

    …ity can be used to take samples directly from containers or vessels. The In-Stream Sampler is made from robust, high quality 316L Stainless Steel. It can be used for sampling both powders and liquids. Multi-purpose sampler 316L Stainless Steel Crevice free interior Polished finish

  • Fluid Point Sampler

    Sampling Systems

    … Available in; 600mm, 1000mm and 1500mm lengths. Sample volumes; 160ml, 300ml and 450ml. Easy to clean. Operation Insert the sampler into the liquid. Pull the handle to take the sample. Withdraw the sampler from the liquid. Push down the handle to eject the sample.

  • …transfer of multiple liquid samples A Visiprep large volume sampler enables you to transfer low viscosity samples directly from any sample container to conventional solid phase extraction tubes on a Visiprep SPE vacuum manifold. Two samplers are available. One sampler has three tube…

  • Automatic Liquid Sampler Supplies

    Agilent Technologies

    Basic Supply Kit (2713N15) contains 10 ml syringes (6/ea), 23/26 gauge needles, 4 ml vials with diffusion caps (144/pk), 2 ml automatic sampler vials with screw caps (1,000/pk), GC septa (25/pk), and vial racks (5/pk).Basic Supply Kit Contains 10 ml syringes

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.