Stirrer Paddle

The Stainless Steel Stirring Paddles from Sampling Systems are ideal for hygienic applications. 316L Stainless Steel Crevice free construction Satin finish Available with holes for improved stirring Part No. Overall Length Blade Width Blade Length Blade…

…include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two lengths of 8mm diameter paddle rod. The heads screw on and off the rods, so they can be mixed and…

…& 402645: Reusable Spinner Direct Top Drive Motor High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The…

…mL Dipping Beaker 500 mL Dipping Beaker 1000 mL Dipping Beaker Stirrer Kit (Consists of 1 each below) 1.5' Handle 3' Handle 6' Handle Stirring Paddle Perforated Mixing Paddle Liquid Sampler Kit (Consists of 1 each below) 1.5' Handle…

Stir samples for better accuracy without the difficulty of a separate stir plate and stir bar. Orion stirrer probe with paddle, for benchtop Orion Dual Star and VERSA STAR series meters Provides automatic solution stirring with direct control from Thermo Scientific™ Orion…

…Benchmark Overhead Stirrers. Paddle w/flat holes, stainless steel The stainless steel flat paddle with holes is used for applications requiring mild stirring.  For use at medium and low speeds, the paddle is 68mm wide.  Fits the Benchmark Overhead Stirrers.  …

PTFE, large-scale, multi-paddle agitator design to accept pinned bottom valves, like our 6482 flush-seal valve. The pin helps reduce wobble or flexing at higher rpm. 19mm agitators will fit drilled type or knob type 8076, 8078 and 8079 shafts.

PTFE, large-scale, multi-paddle agitator design to accept pinned bottom valves, like our 6482 flush-seal valve. The pin helps reduce wobble or flexing at higher rpm. 28mm agitators will fit drilled type 8080 shafts.

PTFE multi-paddle agitator for 10mm OD drilled or knob type shafts. Paddles are replaceable. Fits 10mm OD drilled or knob type 8068, 8071 and 8079 shafts.

…power to the unit should bath temperature exceed a programmed cutoff point. Stainless steel stirrer paddles are driven at 1000 rpm by an improved pulled drive-roller bearing arrangement. Paddles move to a raised position for placement of sample beakers in the bath. Stainless steel bath includes…

…slower speeds for stirring more viscous mixtures. Stirrers include motor, mounting bracket, 3-jaw keyless chuck, paddle, propeller and a right angle clamp. NOTE: Model 8836M34 Lab Stand is recommended to mount GT31 Stirrers. GT24 Stirrers (8585H60 and H64) Cool, quiet-running motors Torque:…

Comprised of precision bored stainless steel tubing. Mixing paddles are joined to shafts of the same diameter to increase the paddle length. You can connect the mixing paddle directly to the motor shaft by using the extension sleeve in place of a chuck.

Material: 316l stainless steel ra32 finish or better inside & out Includes: dust shield, impeller shaft folding paddle Locking ring secures paddle in horizontal position Dimensions: 3"x14"

Material: 316l stainless steel ra32 finish or better inside & out Includes: dust shield, impeller shaft folding paddle Locking ring secures paddle in horizontal position Dimensions: 3"x9"

Material: 316l stainless steel with ra32 finish or better Size: 36l Paddle size: 3" tall x 12" wide

Material: 316l stainless steel with ra32 finish or better Size: 15l Paddle size: 3" tall x 7 1/2" wide

Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.

Hi-torq SST over head drive impeller assembly - full width Size: 8l . For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60008 but to accept 1/2" shaft from 7764-74000 cap assy Material: 316l SST with elelctropolish finish Paddle size: 3" tall x 8" wide

…torque. Available for 120 or 240 V, 50/60 Hz operation. Includes drive motor, mounting bracket, controller, 3-jaw keyless chuck and arbor, paddle, propeller and heavy-duty 90° clamp. Heavy Duty, Model HST20 Totally enclosed, 1/8 hp, permanent magnet, DC motor Direct-drive, with rpm/torque…

Stirrer Shafts, with 4-Blade Propeller Shaft diameter 6.4 mm, with stainless steel, 4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222…

…with paddle speeds from 5 to 300 rpm in 1-rpm increments 1 second to 59 minutes and 59 seconds Programmable Audio Signals The stirrer may be run sequentially through the memory banks, independently in any one of the memories, or continuously at a selected speed. Turning the stirrer off…

…cultures using microcarrier beads. Performance The paddle size and height is optimized for each vessel size. A unique integrated magnet provides a smooth, even rotation at required speeds on any laboratory slow speed stirrer. Heat build-up in the vessel is reduced by means of a specially…

…cultures using microcarrier beads. Performance The paddle size and height is optimized for each vessel size. A unique integrated magnet provides a smooth, even rotation at required speeds on any laboratory slow speed stirrer. Heat build-up in the vessel is reduced by means of a specially…

Precision ground glass stirring shafts, 10mm OD, paddled, button type and bead type. Button type shafts accept 8083, 8085, 8086, 8087 & 8096 stir blades. Beaded shafts accept 8088, 8089, 8090 & 8091 agitators. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 & 8055. Use…

…mL and larger were widened to accommodate monitoring and control devices or media inlet/outlet lines. The Wheaton Celstir features an adjustable paddle blade impeller for better mixing. The impeller does not protrude through the top cap, thereby maximizing incubator space and reducing the chance for…

…for whirling light solids, for flocculations, mixing thickening agents, stirring sludge, etc. Thomas No. 1198F87: Stirring shaft with 6-hole paddle: It generates a tangential flow with reduced turbulence and with gentle mixing of the product. Thomas No. 1198F88: Stirring shaft with turbine…